BMX Euro Bottom Bracket?...

[ron burgundy]

Is it only the right ( standard drive side) cup that has to sit flush with the frame or do both cups have to be screwed all the way in? can you leave any threads exposed?

Eh?

Thanks

[MartyC]

Usually both are threaded pretty much all the way, the non drive side should have a lock ring that would take up most of any exposed thread.  That of course depends on what width the bb shell is compared to the actual bb you are using.  Any pics?

[Stodgy]

Both should fit flush Bren me old poppet.

[MartyC]

I was thinking along the lines of old school euro bb's 

[ron burgundy]

Cut the spacer tube then?



Thanks

[ron burgundy]

Nice, thanks everyone

...and cheers Stodgy for sorting the bottom bracket out, top service...  again 

[THIRSTYKIRSTY]

its prob a mtb bb spacer tube

i have a bmx 1 in shed if ya stuck matey

r

[ron burgundy]

its prob a mtb bb spacer tube

i have a bmx 1 in shed if ya stuck matey

r

Cheers Russ, I've sorted it now...  I used the grinder

[bof]

Nice hidden nation you have there bren , where did you get that from. Is it the V brake model or the ad990 brake model.

[Dark Diggler]

He is racing O/S with it, so SHHHHHHHHHHHHHHHH

[QUADROPHENIA]

bren spread some ass shite around it, should go in a treat then

[ron burgundy]

Nice hidden nation you have there bren , where did you get that from. Is it the V brake model or the ad990 brake model.

Got it off ebay, the bloke was from Wigan, it's the Akira with AD mounts. It still has the 10mm drops out too

He is racing O/S with it, so SHHHHHHHHHHHHHHHH

I'm going to wear a cape, it'll hide the evidence

bren spread some ass shite around it, should go in a treat then

I would have, but my grapes make access to the pipe of poo a bit too risky

[hunterdubber]

Sweet sweet sweet

dib dobs Bren when you part it 

[dan-dare]