gfxgfx
 
logo
 
gfx gfx
gfx
975792 Posts in 138942 Topics by 6363 Members - Latest Member: Bmxflex November 12, 2024, 09:58 AM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Kashimax Restro - still looks powdery (Blue with pictures)
gfx
gfxgfx
 

Author Topic: Kashimax Restro - still looks powdery (Blue with pictures)  (Read 9468 times)

0 Members and 1 Guest are viewing this topic.

punkdSICO

  • Guest
Kashimax Restro - still looks powdery (Blue with pictures)
« on: February 15, 2012, 04:45 PM »
Hi all

Ive raised this before but, still having problems with a Kashi restro.  Previously it was suggested that I try different dye (Dylon) which I have now just finished BUT it still looks like it has powder on it. Its been sanded down to 1200 grade and its smoother than a baby's butt..  With the smallest amount of water, it looks perfect.  Indeed, the second pic below (bottom of the pic) shows a finger print mark and even that amount of grease gets rid of the whiteness..





Any thoughts?  I was about to wipe it with a TINY amount of WD40 but open to better suggestions??

PS: the expert bloke on BurnerWorld said he will not touch blue Kashi's as they never turn out right.  So perhaps the above results are just epidemic of all blue Kashi's??

ta

Paul

Offline dordymush

  • Berm Worm
  • ***********
  • Posts: 10464
  • Rated:
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #1 on: February 15, 2012, 05:03 PM »
i had a nos blue one that kept going like a powder on the surface.
i soaked it in gloss amourall from halfords.
done the trick and when it did start whitening a bit again a quick wipe over and it was sorted again.
worth a try.
dave the bmxing gypo


monkian

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #2 on: February 15, 2012, 05:04 PM »
If you're desperate you could try painting it. Shat did I just say that!!! :-\
At least it's not a set of Skyways. Plasti Kote Super in a satin finish maybe??
http://www.plasti-kote.co.uk/Product/pcode---4181

Just an idea :-X

Offline Jaymz

  • Team RAD
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • I'm not FOOKING Dave
  • Rated:
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #3 on: February 15, 2012, 06:07 PM »
carefully flame polish it with a blow torch, job done shiney shineey

Offline oldschoolace

  • Team Moderator
  • Double Flip Whip
  • *
  • Posts: 6821
  • Bodger
  • Rated:
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #4 on: February 15, 2012, 06:19 PM »
t-cut or glass-cut followed by a polishing mop?
Sixteen thirty-two. What is that? A year?   No, it's your top score on Pole Position.


punkdSICO

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #5 on: February 15, 2012, 06:59 PM »
i soaked it in gloss amourall from halfords.
done the trick and when it did start whitening a bit again a quick wipe over and it was sorted again.
Hey mate - I just tried baby wipes but they did not work.  Ill see if I can get hold of some window wipey things like your Amourall..

ta,

Paul

punkdSICO

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #6 on: February 15, 2012, 07:02 PM »
carefully flame polish it with a blow torch, job done shiney shineey
You serious??   ???  Sounds a bit severe..  Besides, the saddle has a lovely surface; it sanded up lovely..  I just the whitening affect when dry..

ta,

Paul

punkdSICO

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #7 on: February 15, 2012, 07:04 PM »
If you're desperate you could try painting it. Shat did I just say that!!! :-\
Hey mate - really dont fancy painting it.  As mentioned, the finish is really lovely and when wet, it looks totally MINT!  Its just this darn whitening..   :(

Off to my workshop to try some of my special polish, ai!!    :coolsmiley:

Paul

mark 2

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #8 on: February 15, 2012, 07:20 PM »
I had this problem, I wrapped it in 200g of lean back bacon, left it in the fridge for 48hrs. Try it.

mark 2

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #9 on: February 15, 2012, 07:21 PM »
I'll just add it did fook all.

Offline Discostu

  • 540 Air
  • *******
  • Posts: 2757
  • Two's Company
  • Rated:
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #10 on: February 15, 2012, 07:45 PM »
Why not try a bit of back to black spray from halfords or your local garage? It was always good at giving a sheen to black plastic bumpers that had gone white. Just give it a spray and a wipe every so often.  :daumenhoch:

Offline brummie

  • Team Moderator
  • My life is Radbmx
  • *
  • Posts: 208652
  • Rated:
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #11 on: February 15, 2012, 07:48 PM »
you can get that armorall in a matt finish that might look better than shiny

Offline brettypeeps

  • Team Admin / Mechanic
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
    • Bretts Bikes
  • Rated:
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #12 on: February 15, 2012, 07:50 PM »
Blue Tcut?

punkdSICO

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #13 on: February 15, 2012, 07:52 PM »
Off to my workshop to try some of my special polish, ai!!    :coolsmiley:
Despite several attempts, this did feck all (although my Kashi does now have clamydia)..

I also tried Window Lean (like the Amourall suggestion).

I then tried my polish wheel but instantly stopped as the dark impregnated polish started to show on the seat.

Also tried some "All Metal Shine" and this looked great for 20 mins this has also now started to dry with visible whitening..

Sucks..

Paul

rad_pitt

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #14 on: February 15, 2012, 08:00 PM »
As mad as it sounds - the blow torch is probably your best bet. I've seen it done on other blue seats.

rad_pitt

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #15 on: February 15, 2012, 08:05 PM »
Before



After


Offline jT Racing

  • BMX Overlord
  • ***********
  • Posts: 17338
  • i like bikes. :/
  • Rated:
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #16 on: February 15, 2012, 08:59 PM »
ding dong

Offline BENDYCAT ELEVENTEEN

  • Berm Worm
  • ***********
  • Posts: 7327
  • "Click here for link"
  • Rated:
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #17 on: February 15, 2012, 09:03 PM »
Right the trouble here is with the sanding process

 the colour was added when the seat was made - when finished, it looks a solid colour and has a polished surface for a shine/solid colour look

if now you take sand paper and rub it over, this will leave small lines - small flakes/scratches will lose the solid colour and turn it a white/clear with each mark

now if you sand the seat with different grades, it will look whitish - this is what you have - now by putting water or grease on it, it will join where the sanded lines/flakes have lifted, making it look solid again

adding heat will join the flakes/lines together and making it look solid - there will be a point where it heats up and becomes smooth, as the heat melts it it will look shinny

dying it with dylon will only coat/cover the out side - if it has small lines/flakes they will not dye so well and will still look whitish
how long did you leave it in for ?

sanding it down to a smooth or very flat finish might look better and dye better, but heat will give it a more solid colour look after it has been sanded like that


you could also try another way after heating up - it will have a smooth look when heated, but you could try rolling a pattern on to it - the original seat has a slight texture to it - rolling some thing like sand paper over it or some thing similar might give it back it's pattern again ?
The Devil is away on business, I'm having to step in for him - How can I make your day Hell !!!

punkdSICO

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #18 on: February 15, 2012, 09:05 PM »
As mad as it sounds - the blow torch is probably your best bet. I've seen it done on other blue seats.
Cool..  So, I presume the Before/After pics are using the blow torch method??  If so, very impressive results and the before looks exactly like mine..

Regarding a blow torch, I dont own one so could I just carefully use the gas rings on my oven?

"I'll just add it did fook all."  - yeah, I laughed at that aswell :)

ta all..

Paul

punkdSICO

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #19 on: February 15, 2012, 09:09 PM »
how long did you leave it in for ?
Prob about 3+ hours using boiling water and lots of salt.  I dont think the problem/solution is with the dying

you could also try another way after heating up - it will have a smooth look when heated, but you could try rolling a pattern on to it - the original seat has a slight texture to it - rolling some thing like sand paper over it or some thing similar might give it back it's pattern again ?
Cool idea..  Not sure I will try the pattern effect as sounds tricky but, defo gunna try the heating up (assuming it is okay to use a gas oven ring instead..).

Some great help in this thread - big thanks..

Paul

Offline oldschoolace

  • Team Moderator
  • Double Flip Whip
  • *
  • Posts: 6821
  • Bodger
  • Rated:
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #20 on: February 15, 2012, 09:32 PM »
Bendy is right, its the microfine scratches from sanding that make it look powdery. The sanding marks are visible in your pics. I have seen flame polishing done a few times and it does give great results, if you know what you are doing. I would be tempted to get some plastic polish and give it a bloody good go with that first.

Sixteen thirty-two. What is that? A year?   No, it's your top score on Pole Position.


monkian

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #21 on: February 15, 2012, 09:35 PM »
You can use Autosol on plastic :)

Offline BENDYCAT ELEVENTEEN

  • Berm Worm
  • ***********
  • Posts: 7327
  • "Click here for link"
  • Rated:
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #22 on: February 15, 2012, 09:52 PM »
trouble with the gas rings is you can't see the change and what is happerning

you could see if a hair dyer will do any thing - a heat gun would work but being carefull at it

polishing will work but you will have to work at it  ;)
The Devil is away on business, I'm having to step in for him - How can I make your day Hell !!!

punkdSICO

  • Guest
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #23 on: February 17, 2012, 12:22 PM »
trouble with the gas rings is you can't see the change and what is happerning
Yeah, I just found this out :)  Tried the oven on a very small area and like you say, it went from doing nothing to small bubbles that now need to be re-sanded..   >:(

I'll try a hairdryer next..

ta,

Paul

Offline dordymush

  • Berm Worm
  • ***********
  • Posts: 10464
  • Rated:
Re: Kashimax Restro - still looks powdery (Blue with pictures)
« Reply #24 on: February 17, 2012, 01:13 PM »
what window lean did you use.
the amourall i was talking about is for making your tyres shine etc on ya car.

i've just red about using a heat gun on vw bumpers. puts the color back in them after they have whitened so might be worth a go.
dave the bmxing gypo


RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Kashimax Restro - still looks powdery (Blue with pictures)
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal