Author Topic: hello new here got a question (Read 8538 times)

skyway100 · « **on:** December 20, 2011, 06:56 PM »

i just got a bmx from bootsale and cannot find out what frame it is the frame has been sprayed black but under it white and blue and half the front sticker says at the start and end middle missing ko ook

? it has mx brake levers and the stamp on bottem bracket starts with y8 ??

HEYWOOD BMX · « **Reply #1 on:** December 20, 2011, 07:08 PM »

Pics would be a big help.

BENDYCAT ELEVENTEEN · « **Reply #2 on:** December 20, 2011, 07:09 PM »

Took the words outta my mouth

pic's

Peter J · « **Reply #3 on:** December 20, 2011, 07:17 PM »

Make sure you get a good pic of the drop outs on the frame and forks

And if you need to know how to post a piccy

http://www.radbmx.co.uk/forum/index.php'topic=32.0

skyway100 · « **Reply #4 on:** December 20, 2011, 07:30 PM »

i no good with pc so i have to find out my self shame sorry but me and pc dont goat all

BENDYCAT ELEVENTEEN · « **Reply #5 on:** December 20, 2011, 07:48 PM »

can you send pic's from your phone to emails ?

if so pm me

skyway100 · « **Reply #6 on:** December 20, 2011, 09:29 PM »

i dont have a camrea phone ha told you i may be able to e mail a pic tomorrow if i have a e mail to send

BENDYCAT ELEVENTEEN · « **Reply #7 on:** December 20, 2011, 09:36 PM »

PM'd you with my e-mail - will put it up for you when you send it to me

cheers B

skyway100 · « **Reply #8 on:** December 20, 2011, 09:38 PM »

ok i send it now give me 5 min thanks mate

BENDYCAT ELEVENTEEN · « **Reply #9 on:** December 20, 2011, 10:25 PM »

Was thinking falcon but I'm thinking akisu now ?

B

skyway100 · « **Reply #10 on:** December 20, 2011, 10:27 PM »

thanks mate well it had a sticker under paint with ook at the end of it the rest in front was rub out with srtipy lines on sticker

BENDYCAT ELEVENTEEN · « **Reply #11 on:** December 20, 2011, 10:36 PM »

looking at it - the bottom tube looks tear drop shaped - what look the same as the forks with pointing to rear

tell me how the bottom of the forks ends are - solid and smooth or plug ends crimped in ?

it is a lower end bmx but can be made to look better with the right choice of paint and parts

skyway100 · « **Reply #12 on:** December 20, 2011, 10:41 PM »

bottom of forks and smooth and plate welded on end it looks like with small hole in both

BENDYCAT ELEVENTEEN · « **Reply #13 on:** December 20, 2011, 10:48 PM »

I'm gonna say it's Akisu then - but see what other's think

skyway100 · « **Reply #14 on:** December 20, 2011, 11:01 PM »

ok thanks are they rare os low budget bmx s

BENDYCAT ELEVENTEEN · « **Reply #15 on:** December 20, 2011, 11:19 PM »

do the bottom of the forks look like this ?

Aiksu made a copy frame or the likes of Tange and such - they did cheaper fames, but some of the frame we well made and welded - some weren't

the other company that it may well be is Jen Ming - again a copy frame but well made - Frame only but with Akisu forks - then parts added to which ever shop sold them

JEN MING

skyway100 · « **Reply #16 on:** December 20, 2011, 11:22 PM »

well there only one hole in it so no

BENDYCAT ELEVENTEEN · « **Reply #17 on:** December 20, 2011, 11:54 PM »

The drop out plates can differ on forks - it the botton of the forks i mean

same with the rear drop out (where the axle/wheel sits in on the frame) can be slightly different - and under the bottom tube to head tube ~the gusset plates can be different

theRuler · « **Reply #18 on:** December 20, 2011, 11:57 PM »

Mk2 Burner?

rick1970 · « **Reply #19 on:** December 21, 2011, 12:03 AM »

could be the pic but the tube welds dont look too great for it to be akisu or tange and the forks may not be original to frame ,just an opinion mate good luck anyway

BENDYCAT ELEVENTEEN · « **Reply #20 on:** December 21, 2011, 12:11 AM »

Quote from: the®uler on December 20, 2011, 11:57 PM

Mk2 Burner?

please reset you post count to zero

it's not a tange frame - akisu and jen ming copied tange and such like - even may have bought tubing from then to make there frames

camera shake makes it hard to see properly

theRuler · « **Reply #21 on:** December 21, 2011, 06:27 PM »

The components look very cheap.
Hence why I said Mk2 Burner!

skyway100 · « **Reply #22 on:** December 21, 2011, 09:19 PM »

but if it was a burner would the frame serial number start with what i said

skki3330 · « **Reply #23 on:** December 21, 2011, 09:39 PM »

Looks like a cheap Aiksu copy prob steel tubing and quite heavy welds are pretty bad, i had a few like this pass through my hand infact i have one down the side of my house waiting for the scrap man.