0 Members and 1 Guest are viewing this topic.
How do you mean its loose? the top hanger or top cable?
OK, so first of all, is the lower cable adjuster wound all the way out so it pulls the gyro bearing as far down as possible?And then the upper cable adjusters wound all the way out so they're as high as possible?Then make your final adjustment at the lever....
Yeah, you can space out as you see fit. I would say you could chuck a 1 1/8th spacer in directly under the top gyro plate, that shouldn't upset the headset at all
The top gyro plate can be flipped over. Do you have it so it creats the biggest gap?
what lever is that your using?On an Old style threaded 1" gyro setup, you dont really have much room between the upper and lower gyro plate but you can usually get the slack out of the upper cable using the adjusters. Ive had a few where the adjuster on the top splitter and the lever were both all the way out, but I always got all the slack out.
Yeah, it does look a little cooky in the photo. Also, I don't see a headset nut - if they're 1" threaded then there should be a nut under that stem. I replaced mine with one of those GSport top hanger jobbies...