Author Topic: restore or leave as is dirt bros (Read 7898 times)

harris · « **Reply #50 on:** July 11, 2007, 11:20 AM »

still after one of them front hubs

Stodgy · « **Reply #51 on:** July 11, 2007, 11:20 AM »

Quote from: Oberonspacefruit on July 11, 2007, 11:20 AM

a little "slice" of genius.

Oh, nice Phil. Good work.

oberonspacefruit · « **Reply #52 on:** July 11, 2007, 11:21 AM »

i thought so.

Lazarou · « **Reply #53 on:** July 11, 2007, 11:27 AM »

Check this out!......

http://arkbmx.tripod.com/id113.htm

harris · « **Reply #54 on:** July 11, 2007, 11:27 AM »

10/10 laz

Lazarou · « **Reply #55 on:** July 11, 2007, 11:28 AM »

I can't believe Fly are bringing the bashguard back!!

SaMAlex · « **Reply #56 on:** July 11, 2007, 11:28 AM »

That bike was great. ~~G-Sport~~ oops PE Hubs, T1 oops my ally/steel pegs. Front canti brake and a chopping board sprocket pocket. No wonder Im loving race bikes at the moment!

harris · « **Reply #57 on:** July 11, 2007, 11:30 AM »

everything always comes back around,even the front brake is coming back in with new riders
whats next ..

SaMAlex · « **Reply #58 on:** July 11, 2007, 11:33 AM »

Oh, and Ive still got those pegs, the PA crank Flightring and DX pedals, the redneck stem and the wheel set. And probably the pad set too.

Stodgy · « **Reply #59 on:** July 11, 2007, 11:36 AM »

Quote from: Oberonspacefruit on July 11, 2007, 11:21 AM

i thought so.

a 'cut' above the rest mate.

harris · « **Reply #60 on:** July 11, 2007, 11:37 AM »

alex rough guess ,how thick is the nylon as i might order a sheet 4mm or thicker

Lazarou · « **Reply #61 on:** July 11, 2007, 11:47 AM »

I'd go for around 10mm Dan.

SaMAlex · « **Reply #62 on:** July 11, 2007, 11:50 AM »

yes Laz, 10mm / half inch. I will measure it tonight

harris · « **Reply #63 on:** July 11, 2007, 11:52 AM »

cool o i have got a local firm up the road ,might do some custom jobbies

harris · « **Reply #64 on:** July 11, 2007, 09:55 PM »

i found a local chap that will cut some in any gauge.
doing a few plain in 1pc crank and will mess about with a few
something like this , but cut nice and more even just a paper mock up with plain disc

oberonspacefruit · « **Reply #65 on:** July 12, 2007, 08:27 AM »

lookin good dan.

SaMAlex · « **Reply #66 on:** July 12, 2007, 09:24 AM »

Ive got the havok guard with me today. I'll take some pics and post um up, then get it off to ya Dan.

Busy day but hopefully get it done today.

harris · « **Reply #67 on:** July 12, 2007, 09:26 AM »

Stodgy · « **Reply #68 on:** July 12, 2007, 11:54 AM »

That's never gonna stand up to any grinds Dan. Paper cuts, yes. But grinds, no.

harris · « **Reply #69 on:** July 12, 2007, 11:57 AM »

lol you nutter
it was just me fiddling as i was bored.
just going to do a few normal sets,for different sized chainwheels.

theRuler · « **Reply #70 on:** July 12, 2007, 12:19 PM »

good stuff
i could do with one of them!

harris · « **Reply #71 on:** July 12, 2007, 12:19 PM »

i will get a fare few done if i can

SaMAlex · « **Reply #72 on:** July 12, 2007, 01:56 PM »

Here is some pics of the Havok sprocket pocket.
Its bang on 10mm thick.

Lazarou · « **Reply #73 on:** July 13, 2007, 12:00 AM »

Thats the S&M sticker i need for my Gay Bars!! Mental Jimmy's! Are they still going?

SaMAlex · « **Reply #74 on:** July 13, 2007, 12:21 AM »

You need one of those yellow ovals? Ive got one you can have, and maybe a Gaybar sticker too. PM a postal address and they are yours.

Mental Jimmys ended when S&M took over the whole unit they were sharing. Mcgoo moved on to bigger and better things ... and JP didnt.

Author Topic: restore or leave as is dirt bros (Read 7898 times)

Lazarou

Lazarou

SaMAlex

SaMAlex

Lazarou

SaMAlex

SaMAlex

theRuler

SaMAlex

Lazarou

SaMAlex