Author Topic: Redline Proline II (Read 120656 times)

RATTY · « **Reply #300 on:** August 22, 2007, 08:21 PM »

I just picked an MXs frame up in white, badged up as a proline so I will be wanting an MX2 sticker set in the near future

gt0733 · « **Reply #301 on:** August 22, 2007, 10:25 PM »

Quote from: RATTY on August 22, 2007, 08:21 PM

I just picked an MXs frame up in white, badged up as a proline so I will be wanting an MX2 sticker set in the near future

the set from bmx stop are quite good. the only bummer is they don't do the white font for the forks. the set i have i'll be selling, just let me know if you want them.
secret colour, ay?
not sure on the bars, i havn't got it home yet. i'll let you know

john, your mx looks superb and you know you want to sell them pedals to me

Redline · « **Reply #302 on:** August 23, 2007, 01:03 PM »

Hey Ratty,

Interested in a set of these for your MXII build? I produced these from my NOS MXII - 100% accurate! Full wraparound and USA CroMo sticker too! Plus u get Red & White fork decals. White backed Headtube decal as well!
Tried selling them on ebay a while back and was threatened with a lawsuit by Seattle Bike Supply so had to pull them! Pissed me off cos the "Official" Redline sticker sets are all shit... none of their sets for any Redline models are accurate at all. Graphically incorrect and as some of you have found out, don't even fit! I did some correctly sized RL20 Prostyler sets too but didn't get slapped for them for some reason?? Sold some of them to a few guys here on RAD. Done some Powerlitedecals for a resto I sold here and Scorpion Decals (for MartyC).

Wadda ya think?

Cheers
John

Frosty · « **Reply #303 on:** August 23, 2007, 02:38 PM »

Very nice decals there.

You're right about the official redline repro's all Sh*te!

Redline · « **Reply #304 on:** August 24, 2007, 11:49 AM »

Hey GT,

Yeh I'm probably going to do those decals pictured! Are they originals? Not sure because the downtube decals shown aren't a one piece wraparound sticker?? The trick is trying to get hold of something original to work over! I usually carefully peel any damaged decals off the frame/forks, stick the remains down flat on card, scan em and work over them. I don't see the point in working over reproductions as they usually aren't right!

I don't suppose you kept the remains of the ones you peeled off your frameset did you? It doesn't matter if parts are missing!

Cheers

John

RATTY · « **Reply #305 on:** August 24, 2007, 11:57 AM »

was just gonna say, keep this private guys

gt0733 · « **Reply #306 on:** August 24, 2007, 12:00 PM »

forgot to mention that the seat tube sticker on that set i got pictured, is the one piece wrap around. it was quite a good copy. just a shame the right people won't do it properly and thus force us to find our own means

Tricky · « **Reply #307 on:** August 24, 2007, 09:44 PM »

Quote from: cheekythirtysix on August 24, 2007, 11:49 AM

Hey GT,

Yeh I'm probably going to do those decals pictured! Are they originals? Not sure because the downtube decals shown aren't a one piece wraparound sticker?? The trick is trying to get hold of something original to work over! I usually carefully peel any damaged decals off the frame/forks, stick the remains down flat on card, scan em and work over them. I don't see the point in working over reproductions as they usually aren't right!

I don't suppose you kept the remains of the ones you peeled off your frameset did you? It doesn't matter if parts are missing!

Cheers

I can get you the wrap around originals off my frame set to copy, see pics earlier in thread. Its only the fork stickers that are missing.
Just pm me your address John.
John

kowalski · « **Reply #308 on:** August 24, 2007, 10:28 PM »

thirtysix if you can make me 2 85 pl 'redline' stickers which are actually the correct length i will be over the moon and will recomend your skills to the muppets at redline who don't seem to even have tape measures at their prestigeous offices

anyway pm me if you can do them they are the downtube ones and i may even treat me old m8 grem to some too im sure he would fancy a set

ron burgundy · « **Reply #309 on:** August 24, 2007, 10:35 PM »

Ooh.... PL20 in the paint shop, oh yes

GREMLIN · « **Reply #310 on:** August 27, 2007, 11:15 AM »

It will be nice when we could have a choice of top notch decal sets. Whether they be licenced or moody

I still prefer to eventually have the yellow/red fade set on my frame and forks.

nudge, nudge

It's going to be cool to see these Prolines coming together. Especially with different colour combo's in the pipeline too.

G.

RATTY · « **Reply #311 on:** August 27, 2007, 11:32 AM »

Just to add to this thread, My PL20 raced the British championships yesterday, and survived, not bad for a 25 year old bike, made a few people look

Frosty · « **Reply #312 on:** August 27, 2007, 09:43 PM »

Just spotted on the bay for those who may not have noticed!!

Stu Thompson bars

http://cgi.ebay.co.uk/old-school-BMX-Stu-Thompson-Bars-MINT_W0QQitemZ200146476155QQihZ010QQcategoryZ64644QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

ron burgundy · « **Reply #313 on:** August 27, 2007, 09:46 PM »

Quote from: Frosty on August 27, 2007, 09:43 PM

Just spotted on the bay for those who may not have noticed!!

Stu Thompson bars

http://cgi.ebay.co.uk/old-school-BMX-Stu-Thompson-Bars-MINT_W0QQitemZ200146476155QQihZ010QQcategoryZ64644QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Fight, fight, fight, fight...

Frosty · « **Reply #314 on:** August 27, 2007, 10:30 PM »

I did think that too!

ron burgundy · « **Reply #315 on:** August 27, 2007, 11:15 PM »

Three sets on ebay in the last week... common as muck

gt0733 · « **Reply #316 on:** August 27, 2007, 11:53 PM »

Quote from: Frosty on August 27, 2007, 09:43 PM

Just spotted on the bay for those who may not have noticed!!

Stu Thompson bars

http://cgi.ebay.co.uk/old-school-BMX-Stu-Thompson-Bars-MINT_W0QQitemZ200146476155QQihZ010QQcategoryZ64644QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

nice pics of them bars

ron burgundy · « **Reply #317 on:** August 29, 2007, 09:27 PM »

Did someone say 600a?....

Cool

gt0733 · « **Reply #318 on:** August 29, 2007, 10:21 PM »

600a is a model based on the mxIII frame set which came out in late 1982. the grey/black pads would be correct. there's a good write up of it in the december 1982 issue of BMXA magazine

nice one Ron

GREMLIN · « **Reply #319 on:** August 30, 2007, 03:44 PM »

We've a nice collection of Redlines coming together now

I still haven't topped my Proline build off with it's chain yet. I think i'd prefer to wait til i pick up a 44t bubble script chainring first.
Get your pics fired up Kang m8. The more the merrier

Grem'.

gt0733 · « **Reply #320 on:** August 31, 2007, 11:56 PM »

i received my second PL-20 frameset the other day, so i'll be selling my white 1983 mxIII (done with 600a stickers) and black 1979 mxII frames. the '83 has tange TRX fork (painted white) and the '79 has chrome tange TX 1200 fork, both come with headsets. pm me if you're interested in either.

ratty, bars were micro's

how'd ya go with those forks, mate?

RATTY · « **Reply #321 on:** September 01, 2007, 12:01 AM »

Never got a reply about shippin

gt0733 · « **Reply #322 on:** September 01, 2007, 12:06 AM »

Quote from: RATTY on September 01, 2007, 12:01 AM

Never got a reply about shippin

that sucks

there was only 2 bids and both were way above what i thought they'd go for. makes my recent buy look like a bargain

RATTY · « **Reply #323 on:** September 01, 2007, 12:10 AM »

I cant believe the cash things are going for now, its gutting $:-\$

kowalski · « **Reply #324 on:** September 02, 2007, 05:04 PM »

finally my pl20 is starting to ressemble a bike! rough pics for now but here goes

just waiting on a fluted post, red/black tech plate, crupi rounds with black cages and need to buy a chain some grips oh and some dice caps, and better brake pads!:daumenhoch:

Author Topic: Redline Proline II (Read 120656 times)

gt0733

Frosty

gt0733

Tricky

kowalski

GREMLIN

Frosty

Frosty

gt0733

gt0733

GREMLIN

gt0733

gt0733

kowalski