Author Topic: Morpheus Update advice needed :) (Read 724 times)

FuNMoNsTeR · « **on:** June 05, 2007, 05:19 PM »

The wheels arrived for my racebike... They are Velocity Psycho on Profile Race Hubs.... they are superb

I also bought some Fly Powerbend bars and red mushies... I have bought some Bontrager 175mm Carbon cranks for it too. I looked at FSA and Saints but i always have to be a bit different

They are Road/mtb cranks but they look up t the job... i weigh about as much as a fat Hamster anyway

The Bontragers will need an Exo BB... Would a Shimano Hollow Tech fit? I am pretty sure the Bontragers are Isis drive. Any help or advice on which bb i will need would be appreciated

harris · « **Reply #1 on:** June 05, 2007, 05:33 PM »

that is looking rad as fook ,its going to blow away in the wind.

downhill3375 · « **Reply #2 on:** June 05, 2007, 05:40 PM »

the carbonfibre kid

looks mint that mate

don't know fookall about the bb but i know ya will be tryin to stop thatta flyin

Dark Diggler · « **Reply #3 on:** June 05, 2007, 05:48 PM »

I would put some skyways on it, to keep it earthed , if not , get a windometer, it could save your life

MartyC · « **Reply #4 on:** June 05, 2007, 05:49 PM »

Says here http://www.bontrager.com/Road/Components/Cranks/5807.php Tru Vativ ISIS Gigipipe so guessing any ISIS BBwould do, check http://www.chainreactioncycles.com/Categories.aspx?CategoryID=144

.

FuNMoNsTeR · « **Reply #5 on:** June 05, 2007, 06:33 PM »

Quote from: MartyC on June 05, 2007, 05:49 PM

Says here http://www.bontrager.com/Road/Components/Cranks/5807.php Tru Vativ ISIS Gigipipe so guessing any ISIS BBwould do, check http://www.chainreactioncycles.com/Categories.aspx?CategoryID=144 .

Sweet m8... thanks for that info

I need an Isis Exo BB.. just need to measure the width of my bb shell now

I am hoping to get the bike under 20Lbs... 18 would be good

I have an oversized testicle that weighs 6 Lbs so i need to lose the weight off the bike to compensate... i just have to be careful not to wear shorts as it can get trapped in the spokes