New Redline flights

[Dark Diggler]

Just got a set from the states and the bearings are ok, but will need replacing soon, are they the same as Profiles i.e 19mm or are they 20mm as I think having measured them 

Oh and has anyone got any o/s decals yellow/ green , they are going on this:

[oberonspacefruit]

they are on the bay quite often.

especially in the states.


redline prolines are 20mm, id wait till you got the cranks to be sure.

[Dark Diggler]

they are on the bay quite often.

especially in the states.


redline prolines are 20mm, id wait till you got the cranks to be sure.

Got em, they are flights not prolines 

[oberonspacefruit]

i know, but they are reasonably likely to have the same spindle i think. could be wrong.

[Dark Diggler]

i know, but they are reasonably likely to have the same spindle i think. could be wrong.

Ahhhhhh   

[oberonspacefruit]

http://www.alansbmx.com/product_info.php?products_id=2106

[Dark Diggler]

Cheers Phil 

[oberonspacefruit]

looks like i was wrong.

http://www.amazon.com/dp/B000IQCLQW/ref=nosim/'tag=yahoo-sg-20&creative=380333&creativeASIN=B000IQCLQW&linkCode=asn

i was sure that ruler measured his prolines to be 20mm.

[Dark Diggler]

looks like i was wrong.

http://www.amazon.com/dp/B000IQCLQW/ref=nosim/'tag=yahoo-sg-20&creative=380333&creativeASIN=B000IQCLQW&linkCode=asn

i was sure that ruler measured his prolines to be 20mm.

coolio 

[OrgasmDonor]

liking them torkers, been tempted by a couple in the past, bet it'l ride well

[Dark Diggler]

Hey Mr Ferret, you were correct in the 1st, I have just attempted to ram said spindle through profile 19mm bearings, It no fit so 20mm it is , spanish repl. bb's at alans £9.99 ...............................Yes yes oh yeah 

[oberonspacefruit]

spanish?

[brass monkey!]

do you need spannish then ? I thought they were non threaded versions of the Euro BB, made for bike produced within the last 2 years ?? and why are they called spannish ? 

[Dark Diggler]

http://www.alansbmx.com/product_info.php?cPath=32_35&products_id=4276

Same as profiles but 20mm hole , dunno why spanish though, maybe they are made from reconstituted pontefract cakes

Spanish=cupless bb . from what I can gather 

[Dark Diggler]

Anyhow DONE!!!!

 

39/16 too, for ramp action

[oberonspacefruit]

fook knows how you did that. I thought spanish bb were same as US bb, but a smaller bottom bracket, on the frame. Allegedly spanish bb are just the bearings, without alloy cups that the bearings sit in.

saying all that, that bike looks well with them cranks on now.....good job my man!

[brass monkey!]

the new cranks look killer dude !! nice !!

[bof]

are they twin or single pinch

[Dark Diggler]

are they twin or single pinch

Not tellin