Author Topic: Opinions needed please chaps Boa upgrade kit in the pipeline (Read 3693 times)

oldschoolace · « **on:** April 03, 2018, 02:33 PM »

Driving myself potty fooking about with 10mm boa brakes!
Ive come up with a conversion kit from 10mm to 6mm but sourcing the spring carrier is proving difficult so looking at getting them made.
The kit consists of 4 sealed bearings, carbon steel axle, washers and nuts. Everything you would need to rip out the 10mm axle and fussy bearings and replace with easy fit parts.

Question is what you you be happy paying for such a kit?

Couple of development pics (ignore the temporary bolt and nut)

Taipan · « **Reply #1 on:** April 03, 2018, 03:14 PM »

Everyones crying out for the 6mm kits there was an old bike shop that had a stock of 50+ original 6mm kits...I had a few but he stuck the rest on ebay and sold them all in a couple of days at £5 a pop? I'm always reminded that the reason for the change to 10mm from 6mm was because they snapped easy! so If your making a kit to include a spindle make it a strong one

There is no end to your talent fella look forward to seeing your results

oldschoolace · « **Reply #2 on:** April 03, 2018, 03:18 PM »

Thanks buddy, the need for 6mm kits plus Chubbys Rob Ridge build is what lead me to putting the two together.
what do you think price wise though?

Taipan · « **Reply #3 on:** April 03, 2018, 03:22 PM »

I havent a clue? I guess what it takes material and time wise would determine towards the price? I know it would be better than all those bloody ball bearing falling everywhere lol.....I got a pair here that I need doing

oldschoolace · « **Reply #4 on:** April 03, 2018, 03:26 PM »

So far its looking at round £15 if i can source the bits stock and around £20-22 if i cant

Taipan · « **Reply #5 on:** April 03, 2018, 03:27 PM »

is tha tfor a pair?

oldschoolace · « **Reply #6 on:** April 03, 2018, 03:37 PM »

Per caliper $:-\$

Taipan · « **Reply #7 on:** April 03, 2018, 03:43 PM »

Mmm? personally I'd be happy to pay £20 a set plus post but I'd leave them in the spares box if it was gonna cost me £40+ for a pair? but other people might say thats a fare price? so just my opinion but i'll be watching as I said I do need a pair lol

oldschoolace · « **Reply #8 on:** April 03, 2018, 03:48 PM »

This is my problem. I think 15 is reasonable but 20 is a stretch so unless i can find all the componenets stock its not worth persuing other than for my own builds.

Taipan · « **Reply #9 on:** April 03, 2018, 03:50 PM »

Thats fare enough I guess,lets hope you can source all the parts stock

oldschoolace · « **Reply #10 on:** April 03, 2018, 04:00 PM »

4 sealed bearings, 4 brass bushings, 4 washers, axle bolt, spring carrier, locking nut, 2 cupped washers and nylock nut.
Difficult to get it lower than £15 and make it worth my while

Andyboy77 · « **Reply #11 on:** April 03, 2018, 05:21 PM »

Quote from: oldschoolace on April 03, 2018, 04:00 PM

4 sealed bearings, 4 brass bushings, 4 washers, axle bolt, spring carrier, locking nut, 2 cupped washers and nylock nut.
Difficult to get it lower than £15 and make it worth my while

If the conversion-kit consists all the parts mentioned above, £20,- would be just fine too. It is handmade right? This clever trick looks like it would make any caliper work much smother and maybe or eventually make the caliper-arms work in synch easily. I think this could be interesting for anyone who actually rides his bike(s) and is tired of adjusting them caliper brakes over and over again.

How comes that a company like DC or ACS never came up with that idea...? Sell the idea and become rich.

john4130 · « **Reply #12 on:** April 03, 2018, 07:17 PM »

dont know if this helps but this is one of rob ridges reaction boa's. this is the 10mm version but i also have one of his 6mm versions and it's exactly the same except it's threaded for a 6mm bolt.

oldschoolace · « **Reply #13 on:** April 03, 2018, 07:26 PM »

That's brilliant, thanks

Having a hard time finding any and thought about making em myself. That deffo has a home brew look about it. Just need to keep looking for stock ones or work out a way of cutting the slot reliably with the tools I have

Mikku · « **Reply #14 on:** April 07, 2018, 05:28 AM »

I don’t have any Boas (calipers or snakes), don’t need a conversion kit and can’t offer any useful opinions but man, I love following your threads Clint! I wish I had your skills and ingenuity! Top bodging mate!

oldschoolace · « **Reply #15 on:** April 17, 2018, 04:10 PM »

Found one of the black plastic Weinmann spring clamps in my kit box but not been able to find any replacement ones. Suspect the plastic aint up to the job too so had no choice but to make my own.

Made a little clamping jig out of some scrap Ali to keep my bell ringers away from the saw and pretty pleased with the results

griff · « **Reply #16 on:** April 17, 2018, 04:30 PM »

Great work Clint

If you run out of ideas you can borrow my 6-10mm conversion kit

oldschoolace · « **Reply #17 on:** April 18, 2018, 12:00 PM »

Almost there with it. Just need to shave a little off the spring clamp and its ready to test

CustardLips · « **Reply #18 on:** April 18, 2018, 12:09 PM »

Nice work Clint... could do with one of these when you've got em boxed off.

chubby · « **Reply #19 on:** April 18, 2018, 12:47 PM »

The rise of mid prices has made people reluctant to drill forks out these days. 6mm kits are near impossible to find & fiddly to swap over. Best thing about this kit is you don't need to mod the arms for the bearings, this means any dickhead can manage to install it & ride

Andyboy77 · « **Reply #20 on:** April 18, 2018, 12:59 PM »

Great work Clint! Spot on as always.

griff · « **Reply #21 on:** April 18, 2018, 05:10 PM »

Quote from: chubby on April 18, 2018, 12:47 PM

The rise of mid prices has made people reluctant to drill forks out these days. 6mm kits are near impossible to find & fiddly to swap over. Best thing about this kit is you don't need to mod the arms for the bearings, this means any dickhead can manage to install it & ride

Bloody hell Rich - you made a sensible comment

chubby · « **Reply #22 on:** April 18, 2018, 05:46 PM »

Quote from: griff on April 18, 2018, 05:10 PM

Quote from: chubby on April 18, 2018, 12:47 PM
The rise of mid prices has made people reluctant to drill forks out these days. 6mm kits are near impossible to find & fiddly to swap over. Best thing about this kit is you don't need to mod the arms for the bearings, this means any dickhead can manage to install it & ride

Bloody hell Rich - you made a sensible comment

Sorry Griff, won't happen again

oldschoolace · « **Reply #23 on:** April 18, 2018, 05:53 PM »

Must admit, it threw me too

Taipan · « **Reply #24 on:** April 18, 2018, 06:57 PM »

Looks bloody brilliant fella

keep those updates coming

ps...what do people think of the stopping power of a Boa brake?

Author Topic: Opinions needed please chaps **Boa upgrade kit in the pipeline** (Read 3693 times)

griff

griff

Author Topic: Opinions needed please chaps Boa upgrade kit in the pipeline (Read 3693 times)