Author Topic: Bob Reedy/Ace.co. pedal cage build Finito (Read 3186 times)

oldschoolace · « **on:** February 13, 2018, 06:18 PM »

Some of you will remember i picked up a set of Nos Bob reedy pro pedals a while back.

They have sat in the box unloved for a good while - until today!
I decided it was time i got round to having a go at some Demco stylee pedal cages for them

With the Ali already ordered ages ago i sketched a few cage designs and once happy set about taking some accurate measurements with my digital calipers
(you should all have a set by now

)
Next i transfered my design to the ali after covering it in making tape

oldschoolace · « **Reply #1 on:** February 13, 2018, 06:21 PM »

Made a dinky jig to hold the ali against. This also serves as a hand guide to keep the holes in line

oldschoolace · « **Reply #2 on:** February 13, 2018, 06:25 PM »

The hole left in the Mdf underneath made for a handy indexing point to line up the next hole. A quick tap on the drawings confirms all was correct and the teeth of the cages were done.
Tomorrow im hoping to get the bodies drilled out and the cages cut into their seperate sections

Jaymz · « **Reply #3 on:** February 13, 2018, 07:14 PM »

CustardLips · « **Reply #4 on:** February 13, 2018, 07:16 PM »

Them bodies are well cool... looking forward seeing the cages.

griff · « **Reply #5 on:** February 13, 2018, 09:14 PM »

You’ve done it again our Clinton

chubby · « **Reply #6 on:** February 13, 2018, 09:46 PM »

Thought you liked your shins

Them digital calipers in't first piccy look fook all like mine either....

renegaderacer · « **Reply #7 on:** February 14, 2018, 08:33 AM »

Great work!

In2bmx · « **Reply #8 on:** February 14, 2018, 08:37 AM »

Top work Clint

oldschoolace · « **Reply #9 on:** February 14, 2018, 04:01 PM »

A frustratingly short and late lunch today but got all the larger holes drilled, seperated the two parts and filed the ovals on one of the cages

oldschoolace · « **Reply #10 on:** February 16, 2018, 01:24 PM »

Another lunch, another step further

Got the cages pretty much finished short of a final tickle. Made a wooden former to bend the cages, thats tommorows job

chubby · « **Reply #11 on:** February 16, 2018, 01:32 PM »

Get a shuffty on, I'm dying to see if them holes line up

Sent from my HTC One M9 using Tapatalk

oldschoolace · « **Reply #12 on:** February 17, 2018, 03:52 PM »

So was i...... course they did!

CustardLips · « **Reply #13 on:** February 17, 2018, 04:50 PM »

Look ace them Clint... nice work.

griff · « **Reply #14 on:** February 18, 2018, 12:30 AM »

Top drawer

renegaderacer · « **Reply #15 on:** February 18, 2018, 01:45 AM »

The talent of people on this site is endless. Amazing job!

Glynnyboy · « **Reply #16 on:** February 18, 2018, 04:58 PM »

That’s just awesome. Mind blown 🤯

Taipan · « **Reply #17 on:** February 18, 2018, 05:32 PM »

Stunning!

oldtired · « **Reply #18 on:** February 18, 2018, 06:06 PM »

very nice

Retrodan72 · « **Reply #19 on:** February 18, 2018, 06:56 PM »

Seeing skills like this, just reminds me that I'm Sh!t at everything, I've not got any patience to see something like this through.

Jaymz · « **Reply #20 on:** February 18, 2018, 09:08 PM »

NIce work as always Clint

kalex · « **Reply #21 on:** February 18, 2018, 09:47 PM »

lovely job

In2bmx · « **Reply #22 on:** February 19, 2018, 09:57 AM »

Just AWESOME

Now sell them to me

MartyC · « **Reply #23 on:** February 24, 2018, 09:55 AM »

Top bombing there Clint

NORTY40 · « **Reply #24 on:** February 24, 2018, 10:59 AM »

Wow !!! Great work Clint , they turned out so cool

Author Topic: Bob Reedy/Ace.co. pedal cage build ***Finito*** (Read 3186 times)

griff

In2bmx

griff

In2bmx

Author Topic: Bob Reedy/Ace.co. pedal cage build Finito (Read 3186 times)