Author Topic: Did anybody back in the day of mid school..... (Read 3386 times)

rodriguez · « **on:** November 13, 2015, 09:03 PM »

...sand the side of the black rims, similar to shine siding but without the polish. $:-\$

I bought a set of wheels and they have been lightly used so am thinking about running the sander over the sides.

Twenty inches of freedom · « **Reply #1 on:** November 13, 2015, 09:13 PM »

Never done or heard of it but I guess it would clean up the wheels. Up to you really

fugazi · « **Reply #2 on:** November 13, 2015, 10:23 PM »

If you ran brakes the anodising would wear off through use anyway, I used to polish the rims up as it made the brakes a bit sharper, but it wasn't the norm I don't think.

oldtired · « **Reply #3 on:** November 13, 2015, 11:52 PM »

did a few rims bit90's , here's some rims on an 2007 goose i did to tidy them up , looks better than the patchy brake rub i think , 500 then 600 grit then rubbed with 000 steel wool , you get a nice smooth dull finish , makes a good braking surface

looks better with tan wall tires

oldscool · « **Reply #4 on:** November 14, 2015, 05:44 PM »

Yes gusset did some deep side wall black rims with the braking surface ground, Ive got a front wheel still. I think it may have been a hukka.

rodriguez · « **Reply #5 on:** November 14, 2015, 09:40 PM »

Cheers for the replies, definitely food for thought

monteryroom · « **Reply #6 on:** November 17, 2015, 03:37 AM »

would have been done. i've always hated braked up black rims. you could also deanodize the back rim. Did it to a Primo Hula Hoop a while ago. Looks good, polished. Shiny back rim/Black front was a common combo, though generally chrome in back.