Author Topic: DECEMBER BOTM winner is.......... (Read 17201 times)

pickle · « **on:** January 11, 2015, 09:19 AM »

1981 fatgoose 170

FRAME: CC1 1981 mongoose motomag (modified, TIG welded and nickel plated).
FORKS: 1" motomag (re engineered, TIG welded and nickel plated).
HUBS: Schwinn, Width 170mm.
BARS: Gen 2 Hutch pro.
GRIPS: Oakley .5's. Oakley crud plugs
STEM: Helix unstamped square back Tuf neck repro.
HEADSET: Early Tange motocross beartrap copper cage 18 bearing.
RIMS: Schwinn 4 1/4".
SPOKES: Stainless steel DT Swiss champions.
BRAKE: Hope hydraulic m4 evo (160mm saw disc).
DISC ADAPTER PLATE: Engineered.
DISC HUB ADAPTER: Pedalchopper.
TIRES: INNOVA snake bellies 20 x 4 1/4"
SEAT CLAMP: Willinios bmx Cooks bros repro.
SEATPOST: Hsin Lung 4130 22.6mm.
SEAT: Kashimax mx suede.
BB: Team mongoose stamped (re engineered).
CRANK BEARINGS: Tange 12 bearing.
CRANKS: DURA-ACE 170mm.
CHAIN RING BOLTS: Tuf neck.
CHAIN: Izumi.
CHAIN RING: Shimano 39t.
FREEWHEEL: White industries 19t.
PEDALS: Suntour xc compes.
HOT PLATE: Custom made by GRAB ON KID.
DECALS: Bmx products, OG 1981 mongoose seat mast decal and OG 1978 dura ace equipped decal.
VALVE CAPS: Early angled dice.
TITANIUM: Crank, axle nuts and brake bolts.

OTHER MODS: 1. New stem quill and wedge made 0.5 mm larger diameter than standard, hardened and then black oxided.
2. Hutch pro bars powder coated by Chip at C4 labs and then extended to 30" with Control Tech terminator plugs.
3. Loose bearings removed from hubs and replaced with quality caged bearings.
4. Bottom frame gusset is to 1976 motomag spec.
5. Rear disc and calliper are fully adjustable to the rear wheel position including offset.

Well done snoopy

griff · « **Reply #1 on:** January 11, 2015, 09:51 AM »

Well done

Clean · « **Reply #2 on:** January 11, 2015, 09:54 AM »

That's Fooking ace!

denzil · « **Reply #3 on:** January 11, 2015, 09:54 AM »

Worthy winner.

snoopy72 · « **Reply #4 on:** January 11, 2015, 09:57 AM »

Thank you for all that voted

WINI · « **Reply #5 on:** January 11, 2015, 10:13 AM »

Very worthy, well done

dp and chopper dude · « **Reply #6 on:** January 11, 2015, 10:34 AM »

Love it. A worthy winner. It got my vote

senzo milano · « **Reply #7 on:** January 11, 2015, 10:35 AM »

nitrohopper · « **Reply #8 on:** January 11, 2015, 10:53 AM »

Well done mate

Jaypeg · « **Reply #9 on:** January 11, 2015, 10:55 AM »

Congratulations John...

Vos · « **Reply #10 on:** January 11, 2015, 01:36 PM »

Got my vote. The amount of effort in this bike is epic. Well done.

Retrodan72 · « **Reply #11 on:** January 11, 2015, 02:23 PM »

Nice one John, top bike, built beyond anything we've seen on here.

NORTY40 · « **Reply #12 on:** January 11, 2015, 02:43 PM »

Well done John , well deserved

Attention to detail and the amount of time and effort you put into it is a credit to you mate.

It's as mad as a box of frogs but it's one hell of a cool bike

In2bmx · « **Reply #13 on:** January 11, 2015, 03:13 PM »

Congratulations John , worth winner ..

awesome bike ...

eddie kidd · « **Reply #14 on:** January 11, 2015, 03:43 PM »

Stupendous,extremely impressive,amazing, astounding, astonishing, extraordinary, remarkable, wonderful, prodigious, phenomenal, staggering, breathtaking...

I don't know what else to say...

snoopy72 · « **Reply #15 on:** January 11, 2015, 04:38 PM »

Quote from: eddie kidd on January 11, 2015, 03:43 PM

Stupendous,extremely impressive,amazing, astounding, astonishing, extraordinary, remarkable, wonderful, prodigious, phenomenal, staggering, breathtaking...

I don't know what else to say...

"Well I say" nothing like using up most of the dictionary

dancetothedrummersbeat · « **Reply #16 on:** January 11, 2015, 05:53 PM »

Mad as a box of frogs. Loads of thoought, planning & effort clearly went into this. Not to everyones taste of course, but I think it's great!

snoopy72 · « **Reply #17 on:** January 11, 2015, 06:21 PM »

You may think this as even more crazy

I was thinking today and I need to stop doing it

(I love Z'ds) remove the wheels complete (keep them of course) and purchase 2 x schwinn 170 hubs and lace them to a couple of NOS z-rims so it looks like it's on nylon skinnies and the angle of the spokes from the hubs will really show off the spokes.

I wonder

Thank you everyone on RAD for your support on this project.
The breakdown, measurements and build are now on retro-goose.com in the projects section.

insectbones · « **Reply #18 on:** January 12, 2015, 07:50 AM »

Well done John

It's a mad thing for sure.

chubby · « **Reply #19 on:** January 12, 2015, 09:58 PM »

Well done chum, all the head scratching & hard work was worth it

Jono · « **Reply #20 on:** January 13, 2015, 02:44 AM »

it was an easy vote for me

McQUEEN · « **Reply #21 on:** January 13, 2015, 06:35 AM »

I loved reading thread...it was like a metal work lesson from school, great.

Wondering of someone at SE has seen it and been influenced...

pickle · « **Reply #22 on:** January 13, 2015, 01:15 PM »

On One have done one for a while now, Double top tube as well

Looks just like a DP

McQUEEN · « **Reply #23 on:** January 13, 2015, 02:35 PM »

Didn't realise it, but wife just showed me a travel magazine with these 'fat bikes' in. People ride across snowy mountains on em!

oldscool · « **Reply #24 on:** January 13, 2015, 09:39 PM »

They use them on sand as well. Fooking amazing build that is, attention to detail is crazy.

Author Topic: DECEMBER BOTM winner is.......... (Read 17201 times)

griff

In2bmx