Motomag coaster help please #SORTED PICS ADDED OF JOB

[oldboyburner]

I have a rear motomag with out the coaster on and it feels like its a fixed gear can I use parts from the rear coaster hub I have to convert into a coaster brake any help would be great cheers mark

[not johndub71]

That's a tough one.Is the coaster mexican made? Your coaster there is for spokes, so unless there's some internal significance, nope... I would strip the free wheel mech and grease/lube it. Good luck.

[oldboyburner]

That's a tough one.Is the coaster mexican made? Your coaster there is for spokes, so unless there's some internal significance, nope... I would strip the free wheel mech and grease/lube it. Good luck.

The spoked hub is Mexican too
How do I strip the free hub any info on that please

[BENDYCAT ELEVENTEEN]

wish i could help mark 

sweet paint work on them 

[oldboyburner]

wish i could help mark 

sweet paint work on them 

Cheers bendy 

[bof]

I have a rear motomag with out the coaster on and it feels like its a fixed gear can I use parts from the rear coaster hub I have to convert into a coaster brake any help would be great cheers mark

 when you say '' it feels like a fixed gear '' do you mean it feels really easy to pedal? You have a 19 tooth sprocket on   the back . The average feel right gearing for a bmx is 44 16. All you need to do is find a 16 tooth rear sprocket and it should then feel ok to ride :-)

[oldboyburner]

I have a rear motomag with out the coaster on and it feels like its a fixed gear can I use parts from the rear coaster hub I have to convert into a coaster brake any help would be great cheers mark

 when you say '' it feels like a fixed gear '' do you mean it feels really easy to pedal? You have a 19 tooth sprocket on   the back . The average feel right gearing for a bmx is 44 16. All you need to do is find a 16 tooth rear sprocket and it should then feel ok to ride :-)

Hi feels like it will keep the cranks turning when stopped pedalling like its stuck
Does that make sense

[not johndub71]

http://www.google.co.uk/imgres?imgurl=http://www.trfindley.com/fl_bike_pages_pics/bndxcbhz.jpg&imgrefurl=http://www.trfindley.com/pgbndxhbs.html&h=864&w=1091&sz=103&tbnid=YHbLQ5zBxGbykM:&tbnh=96&tbnw=121&prev=/search%3Fq%3Dbendix%2Bcoaster%2Bbrake%2Bdiagram%26tbm%3Disch%26tbo%3Du&zoom=1&q=bendix+coaster+brake+diagram&usg=__JQitCURCkTVn8QL0Nk4Z4PhE-sA=&docid=hixW6pQdyxWOzM&sa=X&ei=AH1FUaGTFLHu0gWQ2YG4Bg&ved=0CDUQ9QEwAQ&dur=4353

I would say your drive screw lug is playing up. On an old skool free hub, the free wheel mech was a stripped down coaster. Suntours dismantled cog first, i would guess the bendix would too.

[oldboyburner]

Cheers johndub71 will have a look later 

[not johndub71]

No worries.

[oldboyburner]

No worries.

There's sand from sand blaster in the gear strip n clean will sort it cheers

[not johndub71]

Brill.

[oldboyburner]

Some pics of the job in hand the inner rear hub on motomag 11

All the bits bearings are tight to get out of the inner

All fitted back up and running sweet

Cheers again John

OBB

[not johndub71]

My pleasure. Internals look great too. Built eh!