Author Topic: Best thread lock? (Read 902 times)

gary67 · « **on:** January 07, 2013, 06:13 PM »

I need to use some thread lock on a Primo crankset.Whats the strongest guys?

TwoBobRob · « **Reply #1 on:** January 07, 2013, 06:15 PM »

The strongest is studlocker but that stuff isn't designed to be undone again....

I'd stick with medium strength threadlocker if I were you.

ED209 · « **Reply #2 on:** January 07, 2013, 06:19 PM »

I can lock this thread ... its just a button press

TwoBobRob · « **Reply #3 on:** January 07, 2013, 06:24 PM »

I'll do the jokes thank you Edward.

Peter J · « **Reply #4 on:** January 07, 2013, 06:28 PM »

TwoBobRob · « **Reply #5 on:** January 07, 2013, 06:32 PM »

Agreed.

gary67 · « **Reply #6 on:** January 07, 2013, 08:26 PM »

Its the insert that i want to threadlock as its stuck on the pedal.I thought if i threadlocked it back in i might get the pedal off

Will the Loctite hold it?

TwoBobRob · « **Reply #7 on:** January 07, 2013, 08:48 PM »

Oooooooooohhhh.................

Probably not.

I'd be looking to get that insert off the pedal on the bench somehow.

gary67 · « **Reply #8 on:** January 07, 2013, 10:19 PM »

Mmmm back to the vice then

gary67 · « **Reply #9 on:** January 08, 2013, 03:28 PM »

It dont wanna come off.Anyone got a spare arm or pedal insert?

HARORIDER · « **Reply #10 on:** January 08, 2013, 03:44 PM »

use the strongest threadlock to screw the insert with the pedal on back into the crank arm -leave it for a few days THEN try to undo the pedal

gary67 · « **Reply #11 on:** January 08, 2013, 04:00 PM »

Will do Paul,may just have to run them with the snafu pedals they come with which are ok as riders!

Jt · « **Reply #12 on:** January 08, 2013, 04:17 PM »

i used to be pretty good at getting threads locked.

HARORIDER · « **Reply #13 on:** January 08, 2013, 04:24 PM »

if you get stuck gaz give em to me and i'll see what i can do for ya

gary67 · « **Reply #14 on:** January 08, 2013, 04:28 PM »

Cheers Paul

Was thinking of flattening opposite sides of the insert and using a spanner on it but havent got the tools to do it!

ED209 · « **Reply #15 on:** January 08, 2013, 04:33 PM »

I'll do the jokes thank you Edward.

agreed

gary67 · « **Reply #16 on:** January 09, 2013, 11:09 PM »

Alll sorted now after getting my mates oxy ace torch on it in a fooking big vice.It was proper stuck in

dordymush · « **Reply #17 on:** January 09, 2013, 11:40 PM »

i got a set of primo's here that have done the same thing.
fookin pedals taking the lot out the arm

.

bof · « **Reply #18 on:** January 10, 2013, 07:10 AM »

Chain reaction cycles are selling primo arms seperate. With a massive discount.

not johndub71 · « **Reply #19 on:** January 13, 2013, 01:19 AM »

Super glue, loctite, nail varnish.