Which other axles will fit shimano dx pedals?

[nosepickben]

Has anyone found anything that will do the trick? I have some 1/2" dx's, i know the 9/16 axles from shimano sx's are the same, but what about victor dx's, wellgo dx's, S&M dx's? Are any of these the same axle? Advice needed please... Whats your experience?

[BENDYCAT ELEVENTEEN]

Some one did find a straight swap i think - jaymz or discostu was it  ?

[renegaderacer]

I've just changed the axles on a set of Shimano SX's to 9/16 and used KKT AMX pedals which are a straight swap.

If SX's fit in DX's then these will work perfectly.  

I also have a pair of Victor DX's (1/2") and they seem the same size too but I haven't had them apart so don't quote me on that. Also, they're a lot harder to find in 9/16" than the KKT's.

Giles  

[kev-s]

it was me bendy

get yourself to halfords and buy a set of alloy halfords fpd platform pedals

the axles, bearings, bearing cups, cones & cone lock nut all fit into the dx body, ive restored 2 pairs of dx's this way

http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_566789_langId_-1_categoryId_165566

[Jaymz]

it was me bendy

get yourself to halfords and buy a set of alloy halfords fpd platform pedals

the axles, bearings, bearing cups, cones & cone lock nut all fit into the dx body, ive restored 2 pairs of dx's this way

http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_566789_langId_-1_categoryId_165566

They also work for SX's as on your advice i did my SX's to 9/16, hence why i have a set of shimano spindles for sale!!!!

[kev-s]

cool, i think there's gonna be a surplus of 1/2in shimano axles soon   

[Dannywhac]

Here's another - if you trim off the last three threads from the ends of those axles (pop a nut on threaded down to the bottom, dremel off and unthread) they'll even fit Peregrine pedals n'all

[Betty]

Victor dx axles are a straight swap n all, i've done it... 

[nosepickben]

Thankyou gentlemen. I'm sure I have some odd victor dx's. Hopefully one of each side....... 

[brettypeeps]

Haro DX's work as well

[ED209]

anyone tried Wellgo DXs?

[rad_pitt]

Pretty sure they fit Ed. I've seen that elsewhere.

I've just swapped some Shimano SX spindles, and they work perfectly in DX

[ED209]

Pretty sure they fit Ed. I've seen that elsewhere.

I've just swapped some Shimano SX spindles, and they work perfectly in DX

coolio ... cheers 

[Gary72]

All this pedal swapping, Anyone have some nice SX bodies going spare, Either Victor or Shimano?
I've got some 1/2 SX here that are rough and could do with some cheap tidy bodies