Author Topic: brakes (Read 1337 times)

J4CK · « **on:** September 18, 2011, 12:46 PM »

i hav finally got verything for my brakes
BUT does the caliper need springs
wen i bought it new, it didnt have springs
but my dad says it should?

J4CK · « **Reply #1 on:** September 18, 2011, 02:21 PM »

my m8 had a golden nugget and took the front brake off it
would the springs out of that work?

http://donegan.ie/gold-nugget-p-146.html

theRuler · « **Reply #2 on:** September 18, 2011, 02:27 PM »

That bike has v brakes mate! Well in the spec it says so.

So no, no good for a side pull on your Burner.

J4CK · « **Reply #3 on:** September 18, 2011, 08:13 PM »

it is one of these
http://www.evanscycles.com/products/xposure/u-brake-ec018526?utm_source=froogle&utm_medium=froogle&utm_campaign=froogle

theRuler · « **Reply #4 on:** September 18, 2011, 11:41 PM »

Those brakes need a little spring inside each arm.
The spring locates in a hole in the brake lug on the brake, and another one in the brake arm.

When you do them up, you twist the spring carrier so that the brake is sprung away from the wheel, then do up the allen bolt.

Tachikoma · « **Reply #5 on:** September 19, 2011, 02:11 PM »

For the record the springs aren't visable normally, you tighten the caliper to the 990 mount then adjust how much it "springs" by loosing it off a little and turning the head bolt with a spanner then re-tightening the alan bolt.