Author Topic: Tap and Die (Read 445 times)

Gnarlyscoots · « **on:** July 11, 2013, 07:09 PM »

Does anyone here have a set of Tap and Dies'

If so, can you run a die over a DC brake spindle and tell me which one it is please,

Thank you

HUTCHMAN · « **Reply #1 on:** July 11, 2013, 07:17 PM »

M6 die.. it will be a tad tight though, the spindle has a rolled thread , so the diameter required during manufacture is larger than making a thread by hand.

Gnarlyscoots · « **Reply #2 on:** July 11, 2013, 07:44 PM »

Thanks buddy,

Off to pick one up now

HUTCHMAN · « **Reply #3 on:** July 11, 2013, 08:11 PM »

don't forget, half a turn forward, then quarter turn back and plenty of lube!!

Gnarlyscoots · « **Reply #4 on:** July 11, 2013, 08:35 PM »

Is this any good

http://www.ebay.co.uk/itm/tap-and-die-set-/230880570053?pt=LH_DefaultDomain_3&hash=item35c18deac5

mattuknc · « **Reply #5 on:** July 11, 2013, 08:48 PM »

I have one that I've used before Terry.

Quote from: Londonhellboy on July 11, 2013, 08:35 PM

Is this any good

http://www.ebay.co.uk/itm/tap-and-die-set-/230880570053?pt=LH_DefaultDomain_3&hash=item35c18deac5

Author Topic: Tap and Die (Read 445 times)

Gnarlyscoots

Tap and Die

HUTCHMAN

Re: Tap and Die

Gnarlyscoots

Re: Tap and Die

HUTCHMAN

Re: Tap and Die

Gnarlyscoots

Re: Tap and Die

mattuknc

Re: Tap and Die