RADBMX.CO.UK
Old School BMX 1980 - 1988 => Old School Race (riders ready, pedals ready... GO!!) => Topic started by: Dingobmxer on May 14, 2007, 06:34 PM
-
I have been riding this for the last couple of weeks with a mix of parts from my parts bin but finally got round to putting the bits I really wanted on it :smitten:
Just waiting for my Challenger stem to come back from the anodisers now to raise the bars a little bit.
Nicked Darkersomeday's idea for this shot (sorry Joe :-[ )
(http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/aaa021.jpg)
(http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/aaa022.jpg)
(http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/aaa023.jpg)
(http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/aaa024.jpg)
Bike in action (thanks Andy for this shot :daumenhoch: )
(http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/xxxx005.jpg)
Hope you like?
:) DINGO :)
-
looks mean :)
-
:smitten: my dream bike ,very nice dingo :daumenhoch:
-
like it ??
i fooking loves it :4_17_5:
-
It sure does look good matey. Just as I'd expect from one of your builds.
Bet mines faster though!!!!! ;D
-
Little beast isn't it?
And you have put me to shame, must takes the bikes out of that pokey garden for some better pix. Although my pots are coming along lovely with that hot April.
-
Oh and I forgot to add I am waiting for S&M bars to arrive too, dont want Darkersomeday on my case :police: :police: :LolLolLolLol:
:) DINGO :)
-
its got to be a first , dingo posts some pictures and not a quad to be seen !
-
That looks way nice, propper clean and simple.
I was just saying to someone today, if I had my way, all my bikes would have all black parts and painted frames (not always, but usually black). There is still a bit of chrome and silver on there that could do with coming off (bars, seatclamp and chainring). I hope the new bars are black.
Really nice build. Cant wait to see it for real, maybe even take it for a spin?
-
Thanks for the comments guys :smitten:
Alex, I have a black S&M XLT seat clamp here and the bars are black too, I want an S&M littleman sprocket in 36t in black before I put them on though, wheels will remain chrome :coolsmiley:
Alfie, I do love my Quads but I needed a bike I can just chuck in my van and take to work with me (to go riding straight after) and not worry about.
:) DINGO :)
-
Black bars, seat clamp and chainring and that bike will be kicking it! Sure, chrome rims. That goes without saying.
Are you OK to get an S&M sprocket? Ive no idea if they are easy to get hold of. Let me know if you need any help with it.
Alex
-
I need all the help I can get Alex :LolLolLolLol:
Just looked around but £45 is the cheapest I have seen :uglystupid2:
:) DINGO :)
-
You've built another beauty there Dingo. :4_17_5:
Is that Jay Kennings old f&f?? If so I've had some good battles against that bike.
-
You've built another beauty there Dingo. :4_17_5:
Is that Jay Kennings old f&f?? If so I've had some good battles against that bike.
Thanks Foxy, its not JK's frame, this one came from the US :daumenhoch:
:) DINGO :)
-
I need all the help I can get Alex :LolLolLolLol:
Just looked around but £45 is the cheapest I have seen :uglystupid2:
:) DINGO :)
Hmmm. thinking about it, I think I have got a black 36 t S&M sprocket, but not a little man one. You are welcome to have that one, and I will see if I can get you the one you want. I'll let you know tomorrow
-
If it doesnt have a guard on it Alex that one would be fine, I just wanna keep it all as S&M as possible
:) DINGO :)
-
its got a bolt on guard. I'll go dig it out now.
-
Parts rundown:-
Frame, S&M Neal Wood
Fork,S&M Race
Headset,Campag internal (with Fly cnc cover)
Stem,S&M Redneck LT
Bars,TNT Retro (to be swapped for S&M Race)
Grips,S&M lock on with Envy bar ends
Lever,Shimano XT
Brake,Shimano XT
Cable,Odyssey linear
Seat,Selle Italia
Post,Odyssey Intac
Clamp,Profile slim Jim (to be swapped for S&M XLT)
Crank/BB Profile Race 180mm with titanium spindle
Chainring,Profile Imperial 36t (to be swapped with S&M one)
Pedals,Easton Flatboy
Wheels, Profile race hubs (cassette) with Araya Himiko rims
Tyres,Tioga Comp III (fat front/thin rear)
:) DINGO :)
-
Here is that chainring Ive got. Its not all that nice, and its not very light and its got a 19mm hole through it. Its S&M, its 36t, its black, and its yours if you want it. Im guessing you wont want the bolt on goatee.
(http://www.radbmx.co.uk/archive/albums/r313/alexleech/parts%20for%20sale/chianring1.jpg)
(http://www.radbmx.co.uk/archive/albums/r313/alexleech/parts%20for%20sale/chianring2.jpg)
(http://www.radbmx.co.uk/archive/albums/r313/alexleech/parts%20for%20sale/chianring3.jpg)
-
Hey Mark,
She's a beauty, would'nt expect anything else from you.
Now what shall I build next??
Matt Pohlkamp Signature DK??????????????????
With all the trick bits on it?
Cheers,
Paul.
-
Lookin good bud :daumenhoch:
-
Cheers Fellas :daumenhoch:
Paul build that DK mate, sounds sweet already :daumenhoch: 8)
Alex you got PM
:) DINGO :)
-
another sweet,clean build dingo,it'll probably freewheel as fast as i can pedal ;),how do you get them to run so smooth???
priv
-
sorry dingo i only just clocked this!!
that looks fantastic mate!
what a build, s&m parts specific, all black, simply beautiful :smitten: :smitten: :smitten: :smitten:
one of THE best builds i've ever seen,
great photo's too!
:4_17_5:
-
back in black !!! good work dingo :daumenhoch:
-
wow Thanks again guys,
Prov, its taken many years of fettling bikes to get them to run so smooth :daumenhoch: (not really, just put some air in the tyres mate :LolLolLolLol: )
:) DINGO :)
-
wow Thanks again guys,
PrIv, its taken many years of fettling bikes to get them to run so smooth :daumenhoch: (not really, just put some air in the tyres mate :LolLolLolLol: )
:) DINGO :)
.
-
wow Thanks again guys,
PrIv, its taken many years of fettling bikes to get them to run so smooth :daumenhoch: (not really, just put some air in the tyres mate :LolLolLolLol: )
:) DINGO :)
.
????????????????????????????????????
:) DINGO :)
-
Sweet Build Mark:
Love thoes wheels, they run soo smooth (the ones off your kappa yes?)
-
Thanks Dan :daumenhoch:
They are indeed off my Kappa, I was gonna use some other wheels but these are vjust too sweet to leave in the loft
:) DINGO :)
-
arty shot with new Slam bars fitted
(http://www.radbmx.co.uk/archive/albums/y79/dingobmxer/aaa025.jpg)
its now stripped and boxed up ready to go for a nice thick coat of baby blue paint :smitten:
:) DINGO :)
-
thats a great looking bike, looks cool in black, cant go wrong with baby blue though :)
-
I have the Lion stickers for the downtube.