RADBMX.CO.UK
Technical & Reference Section => Tech and Restoration => Topic started by: slowpoke24 on July 27, 2006, 05:25 PM
-
Can anyone confirm if this is a first gen Haro or not by the serial number.
100 - 2033f
Any info welcome,cheers guys.
-
show us some pics would be easyer to tell then :daumenhoch:
-
is that the full number?
-
no its not a gen 1 is my initial answer on those numbers
if its t00 2033f, then yes
Dave
-
Sorry no pictures,but the first number could be a T.I've looked through previous posts to compare and from the looks of it this is identical.
Will keep you posted.
-
if the first is a t then yes it is a gen1
-
If it's not a T could it be an "I" or a " l " or if it's not a gen 1 what could it be?
Really know very little about these (or any other bike for that matter lol)but i know you guys do.
Intrested to find out more about it,and i will try to get some pic's of it for ya.
Cheers.
-
get some pics up, take a photo of the frame side on, from above, front gusset & dropouts
-
the 't' was used as a prefix for torker built frames....
Dave
-
i want it :'( the gen 1 that is :LolLolLolLol:
-
Can anyone give me a price guide for a gen 1 f+f plz.99% sure this is genuine article.
Dave,he did say that it had Torker tubing,doe's this sound right?
-
yeah, by that he might just mean the style of a torker, i.e the twin top tubes....
price????, depends on the condition to be honest....anything from 150-500 i suppose.
Dave
-
Dave
I'll give you £150 for yours! :daumenhoch:
-
Im not sure, but I think Dave might have a Gen 1. If he has & he posted a pic of it, you could see what it looks like, then see if what you have got is the same.
-
Cheers Dave......are there any distinguishing features that could give it away?
Ive looked at the museum bikes over and over and can't tell.Cheer's anyway
-
Cheers Dave......are there any distinguishing features that could give it away?
Ive looked at the museum bikes over and over and can't tell.Cheer's anyway
Does it have a coaster mounting on the rear dropout ? is the front gusset welded all the way or does it have a gap ?
The best way is to post a pic or send one to someone.
-
It has a gap in the middle of the gusset weld?
-
Is the coaster break mounting on the left side as you sit on it?Just under the frame in front of rear drop out?If so yes.
-
It has a gap in the middle of the gusset weld?
Good
-
Is the coaster break mounting on the left side as you sit on it?Just under the frame in front of rear drop out?If so yes.
Well sounds like it is probally a Gen 1, send a pic if you can.
-
it must look a little bit like this
(http://www.radbmx.co.uk/archive/albums/v255/rombloke/1080e0d4.jpg)
;D ;D ;D ;D ;D ;D ;D ;D
-
Dave.......no need to show me,i must have looked at it about 50 times today!!
Never get fed up with looking at those!!
Thank's for everyones help, will keep you posted,
Chris
-
it must look a little bit like this
(http://www.radbmx.co.uk/archive/albums/v255/rombloke/1080e0d4.jpg)
;D ;D ;D ;D ;D ;D ;D ;D
Your Lucky, I know Dave doesn't really like to show this very often ;)
-
Lol............they are a thing of beuty, like most of the bike's on this site!!
-
it must look a little bit like this
(http://www.radbmx.co.uk/archive/albums/v255/rombloke/1080e0d4.jpg)
;D ;D ;D ;D ;D ;D ;D ;D
Your Lucky, I know Dave doesn't really like to show this very often ;)
WOW! I didn't know Dave had a Gen 1 Haro, that's a surprise :LolLolLolLol:
-
not sure how i do this
-
http://cgi.ebay.co.uk/Vintage-Freestyle-BMX-1983-HARO-FREESTYLER-FRAME_W0QQitemZ190013150532QQihZ009QQcategoryZ64644QQrdZ1QQcmdZViewItem
This is for the frame only - forks are seperate item,why he is splitting down a good f+f god only knows.
The serial is T00 2033f, he confirmed to me earlier.I tried to get this up earlier but i'm a pc dunce.
-
There you go . . . this auctions gonna go mental at the end :coolsmiley:
(http://i16.ebayimg.com/01/i/07/d1/0f/2b_1.JPG) (http://i10.ebayimg.com/02/i/07/d7/e7/d7_1.JPG)
(http://i8.ebayimg.com/02/i/07/d8/f5/10_1.JPG) (http://i4.ebayimg.com/01/i/07/d5/b1/dc_1.JPG)
(http://i17.ebayimg.com/05/i/07/d0/e3/10_1.JPG) (http://i17.ebayimg.com/04/i/07/d0/e3/2e_1.JPG)
(http://i20.ebayimg.com/04/i/07/d0/41/3a_1.JPG) (http://i15.ebayimg.com/03/i/07/d1/e7/e9_1.JPG)
(http://i1.ebayimg.com/02/i/07/d5/c0/9a_1.JPG) (http://i10.ebayimg.com/03/i/07/d7/e8/8e_1.JPG)
(http://i22.ebayimg.com/05/i/07/d5/c5/a1_1.JPG) (http://i24.ebayimg.com/02/i/07/d5/c6/75_1.JPG)
Cheers
Steve :daumenhoch:
-
Yeah you know it is Steve..........hope i ain't fooked it for anyone.Sorry if i have.
-
hope i ain't fooked it for anyone.Sorry if i have
I doubt it mate . . . I expect the sellers got loads of people watching already and waiting to pounce
That's a real nice example and good luck if your gonna place a bid :daumenhoch:
-
That's Darrin Stout, a good guy from the other side!! That wont be a moody one.
Minihaha, you're right that thing will surely have loads of last minute activity ;D