RADBMX.CO.UK

New School BMX 2004 - Now => New School Park, Street & Dirt => Topic started by: Philbert on December 29, 2009, 04:47 PM

Title: weighing in at 24.2lbs and 4 months in the making
Post by: Philbert on December 29, 2009, 04:47 PM: thought i'd show you lot how a bike should be built!

finally got my new bike built having put the order in back at the end of august and several months to source and buy new parts

custom standard 250L with 20.5 inch toptube, engraving to dropouts, and headtube. and traditional 'standard gusset'
odyssey classic forks with brake mounts
fly internal headset
S&M redneck LT stem
proper bars (borrowed and on trial to see if i get on with big bars)
fit cleveland grips and endplugs
odyssey mono levers 'medium'
diatech hombre brakes
snafu mobeus gyro
odyssey slic cable on front
odyssey gyro cables on rear
primo 330mm seatpost 'pivotal'
mankind pivotal seat
united seatclamp
odyssey plastic pedals
profile cranks with titanium axle
unted mid bb
terrible one 33t sprocket
kmc chain
odyssey cassette rear hub with 12t ring on 3 piece driver
odyssey vandera 2 front hub
primo 7000 series rims
khe mac2 tyres 2.1
shadow conspiracy pegs

(http://www.radbmx.co.uk/archive/albums/aa304/covphil/IMAG0012-1.jpg)

(http://www.radbmx.co.uk/archive/albums/aa304/covphil/IMAG0005-1.jpg)

(http://www.radbmx.co.uk/archive/albums/aa304/covphil/IMAG0014-3.jpg)

(http://www.radbmx.co.uk/archive/albums/aa304/covphil/IMAG0013-1.jpg)

(http://www.radbmx.co.uk/archive/albums/aa304/covphil/IMAG0006-1.jpg)

(http://www.radbmx.co.uk/archive/albums/aa304/covphil/IMAG0007-2.jpg)

(http://www.radbmx.co.uk/archive/albums/aa304/covphil/IMAG0008-1.jpg)
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: tolaknawris on December 29, 2009, 05:04 PM: 8)
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: magna13 on December 29, 2009, 05:10 PM: very nice :smitten:
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: harris on December 29, 2009, 05:33 PM: nice solid ride at last on rad ,standard make nothing but the best and heres a fine example.
glad you hooked the fronty up getting bored with everyone one the rear or none..tech is what sbc is about.
are them boots round the wrong way phil or they might run slower.

good work dano.
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: Voodoocars on December 29, 2009, 06:21 PM: 24.2lbs.... jeez Phil, has the frame got lead in it ! ;)
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: Philbert on December 29, 2009, 06:54 PM: I think 24.2 is pretty light considering it's got two brakes, a gyro, and pegs
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: magna13 on December 29, 2009, 07:21 PM: ^^^^^ :daumenhoch: :daumenhoch: :daumenhoch:
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: ron burgundy on December 29, 2009, 07:33 PM: Solid :daumenhoch:
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: pickle on December 29, 2009, 08:09 PM: it's got a real mid school look of bomb proof about it.................................fooking luuuurvely! and i've always loved Raw finish :smitten:
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: Bettyswallocks on December 29, 2009, 10:29 PM: Needs the seat lowering.... lol

Lovely... put the tyres on right way round and jobs a good un... :daumenhoch:
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: hunterdubber on December 29, 2009, 10:47 PM: Quote from: pickle on December 29, 2009, 08:09 PM
it's got a real mid school look of bomb proof about it.................................fooking luuuurvely! and i've always loved Raw finish :smitten:

Aye ,,, what Roberto said :daumenhoch:

Awsome frame , Phil :smitten:
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: madmike-bmx on December 29, 2009, 11:31 PM: not realy my cuppa tea ... but still looks a treat ... all you need now is a nice SUNNY HOT DAY and your sorted ! :4_17_5:
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: Philbert on December 30, 2009, 02:15 PM: new thread on tires!!!!!!!!!!!!!!!!!!
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: Dingobmxer on December 30, 2009, 02:28 PM: looks mid school almost, very sweet Phil :smitten:
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: generallee on December 30, 2009, 03:58 PM: Really like that Phil, lovely. Similar colour scheme to my new bike - Joes old S&M LAF XL in raw with chrome/black parts!
Nice one!
steve
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: Robbo on December 30, 2009, 04:39 PM: Nice one Phil. 8)
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: subversion on December 30, 2009, 06:16 PM: Nice work that man :daumenhoch:
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: lodge on December 30, 2009, 10:38 PM: Very nice nothing to dislike about it, is the gusset for strength or purely aesthetic? its a standard thats for sure.
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: christhejob on December 31, 2009, 05:02 PM: welcome to the custom standard club, is a nice place to be!!
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: Philbert on January 01, 2010, 01:26 AM: I feel special!

Got some new bars for it today so more pics up new years day, and more chrome! Wahoo!
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: gobshite on January 04, 2010, 02:52 PM: custom standard...... :smitten:

nice as fook that phil,
i like it,

i like it alot.

set of black 250l stickers here if you ever need them for it :daumenhoch:
Title: Re: weighing in at 24.2lbs and 4 months in the making
Post by: CD17 on January 06, 2010, 10:30 AM: Looks spot on that build 8)