Author Topic: euro bb help (Read 735 times)

endo · « **on:** November 07, 2009, 04:55 PM »

just got a new macneil moto frame, cant seem to get the threads started on the euro bb any advice

Voodoocars · « **Reply #1 on:** November 07, 2009, 05:53 PM »

Make sure there is no paint in the bb. Are the threads handed depending on what side? Havnt fitted a euro for years so I cant remember.

motomagII · « **Reply #2 on:** November 07, 2009, 07:36 PM »

pretty sure you have to have the bb cleaned!!before you use it on new frame by your local bike shop

TwoBobRob · « **Reply #3 on:** November 07, 2009, 09:21 PM »

My Macneil Friemuth had a euro bb and it went together ok from new as it happens.. Be aware though, I'm pretty certain one of those threads will be left handed. Or so I believe, t'was a while ago...

Gary72 · « **Reply #4 on:** November 07, 2009, 09:34 PM »

One side is left threaded like pedals

tobybrown35 · « **Reply #5 on:** November 07, 2009, 10:00 PM »

try both sides wots hard on one may go in smooth on other post pics of bike when u get built b nice 2 c 1 built up

HEYWOOD BMX · « **Reply #6 on:** November 08, 2009, 11:05 AM »

Small wire brush on the threads may help to get rid of any burrs/paint(Go round the threads not across).And plenty of grease.Clean the paint of the outside of the bb shell where the cup butts up against the frame for a better fit & don`t forget your tube spacer.