BOTM Nov 2009 - Entries

[Gashead]

 

Off you go !

[rollin72]

83 mongoose cali frame and forks
renthal bars-restored, nos mongoose grips, nos dia compe 901's, nos kusuki stem, gt layback, new kashimax, z-rims and z- hubs- restored, tioga mitsubishi comp 8 tyres, redline flightes- restored, pro class chaindisk-restored, takagi chainring-restored, nos kkt pedals, custom decals, repop padset. nice1 gaz

[Spen69]

Well, it's had a colour change and a brand new set of wheels and boots, so it's looking like a mongoose start to this month's BoTM alright

All my bikes are like you'd have had BITD so it's got roughly period parts that you'd have upgraded to if you afford to

1978 Team Mongoose and Team Mongoose forks c/w MK09 mud still
1981 NOS (get a load of these lush puppies!) UKAI 7C rims and ACS hubs shod with NOS Compe3's (not anymore!)
Some posh crank I found lying about with NOS MKS pedals and NOS Sugino ringpiece
Some old MX1000's and Tech 3's
Really old Mongoose bars (Jonnygoose will tell us how old no doubt!) with an equally old Suntour stem that's faded to fook
Nice Viscount Aero on a Redline post







Spen

[neiljonarcus]

   DB250   "PAUL"


 PATTERSON PR200

[cuckoo]

freshly built 1984 skyway t/a. 

it took me long enough on part selection & color scheme. always wanted to build a white/blue skyway t/a, but I can't stand too much blue so tried to cut down the blue parts to chrome/silver. here's the part list:

frame: 1984 skyway t/a
forks: not sure is 1986 or 25 anni bought as is without sticker
wheelset: shimano high flange hubs, stainless steel spokes, anno blue nipples, powdered araya aero rims, kuwahara irc racer 80x tires, shimano mx30 freewheel
brakeset: d/c tech 2 levers, 890 calipers
headset: tange 303 with tange headlock
stem: nitto mx2
handlebar: win v bar
grips: tange
seatpost clamp: tange
seatpost: shimano dx
seat: kashimax
crank: sugino 400
spider: sugino
pedal: kkt amx
chain: izumi

all nos except frame, forks, rims, cranks & frame pad. enjoy! 

[sawzall]

  VINCENT PRO





I BUILT THIS USING AS MANY BRITISH PARTS AS POSSIBLE,I COULDN'T BELEIVE HOW DIFFICULT IT WAS TO FIND BRITISH MADE PARTS
I RE -SPRAYED FRAME AND FORKS WITH A CUSTOM MIX ORANGE TO MATCH THE ORANGE VINCENT USED ON THERE FREESTYLERS
MOST PARTS I HAVE USED HAVE BEEN RESTORED
BIG THANKS TO STIDDS FOR WHEEL BUILD AND STEVE FOR PADS

[meticulous]

hutch pro racer...

[dannywhiteley]

Parts include:

NOS Rebel padset (this is what inspired the build as I never thought I would find one)
Rebel f/f powdered by Dan (thanks ) and decals by Del (cheers )
NOS CW moustache bars
NOS bubble font A'me Super Soft grips
Redline forklifter stem (set up with potts mod)
Hatta h/set a and Beartrap BB
Nippon calipers and tech 4 levers
Powdered sugino 175 crank, Tuff nek chain wheel and (I think) PPP power disc with red/blue bolts
Hutch Hi Calibre pedals
Powdered stamped GT layback stem
Dominator handler seat
Powdered Dia Compe hinged clamp
4 x Skyway pegs
White new tuffs (only thing I would like to replace with era correct but they look ok cos its mid to late 80's anyway so doesnt need alloy hubbed)
Panaracer freestyle tyres

[muddstud]

Trm    totaly rubbish make 
 

[bods]

Don't like to jump straight in but I'm quite pleased with just getting this DB together and be nice to enter it in, hope you don't mind

My BMX Bandits Replica

Nos, tuff pads, chainring, brakes/cables, stem, seat clamp, repro pads and decals, it's not mint but I wanted to ride it also 

[AtariAger]

Well...I just built this one...thought I might throw it in.

1985 Hutch Judge Series

The frame, fork and bars have been re-powdered white and I used a repop decal set.  Everything else on her is all original.

I like to call this build...1985 Judge with a little bit of, "Class"...Pro Class that is...  !!!

- Hutch Judge F/F white
- Hutch Pro Racer bars white
- Hutch grips black
- Hutch Ti/Mag hubs
- Hutch donut seat clamp
- Hutch Rad Kaps
- Hutch Deep "H" stem
- Hutch 2~in~1 lock
- Hutch pad set black
- Hutch Bear Trap pedals
- Pro Class "1st" Generation crank set complete
- Pro Class power plate polished
- Tuf Neck chain ring 44T
- Kashimax Aero black
- Elina lay back
- Pro Class hoops Aluminum Alloy polished
- Asahi stainless steel spoke w/black nipples
- Pro Class rim strips white/originals
- Dia-Compe 1000 brake w/white pads
- Cheng Shin tyres
- Tange 320 head set

[weavill]

mmmmmmmmm 

[martylaa]

Kuwahara Exhibitionist 1984
Parts List:
1984 Kuwahara Exhibitonist Frame and Forks
Kuwahara Laserlite Seatpost
Kuwahara Freestyle Stem
Hutch Mike Domingez Freestyle Bars Rechromed
NOS ACS Turquoise Z-Rims ( one is a Fred Blood, nightmare to find a full set of either in this colour )
NOS Suzue Hubs in Turquoise
Tioga Comp Pool in White
Oakley O-Wings in Turquoise
Redline 401 Single Pinch Cranks with Redline Classic 44T Chainwheel
Shimano DX Pedals Polished
Dia Compe FS 880 Full Brakeset
Dia Compe MX Seatclamp in White
Tange 320 Headset in Chrome
White Chain
Turquoise Seat

[bobafett]

Built for / with my daughter 

1981 minigoose by bobafett & minifett........

Spec:
1981 nickel minigoose F&F (original finish)
Race Inc bars
New AME rounds
Pro-class wheels (with custom rim tape)
NOS Comp St
New dice caps
SR stem
mongoose stamped headset
DiaCompe 890/1020 polished calipers
DiaCompe pre-bent polished levers
NOS DiaCompe cables
NOS genuine skyway tuff pads
mongoose spider
40T takagi chainwheel
unstamped 165mm crank
NOS KKT P8 lightweight pedals
Short dyno chro-mo seatpost
mongoose stamped seatclamp
quilted messinger 'style' seat
custom mongoose vinyl padset
custom minigoose decal set


Pics:










More pics in the full thread here : http://www.radbmx.co.uk/forum/index.php'topic=99351

 

[Finny]

Does this Count? I have just Purchased this very Bike from Juan at BMX Addicts, Well its a new build to the UK!!

Some awesome Bikes guys, congrats.
regards
-Jas

[aerostylie]

The quality of builds is just superb/stunning

Oh well here's my effort, I'll stick it in anyway. Always yearned for a T/A, the bike I most wanted bitd. Struggled a bit deciding parts and obviously not era correct, so built to suit.





Different seat post in this pic as couldn't decide which to choose, the renthal or GT layback




Parts rundown:
USA 7/84 straight bridge, skyways logos still visible on dropouts/forks
SR Stem, EZ MKII Bars, Sugino Cro mo crank, Sakae spyder, Sugino chainring 44t, MX 1000s, MX seatclamp (copy), SX Pedals, Sharp BB, Skyway Designs Padset, generic chain, GT Seat post (& option of red Renthal layback), 'Free Style' branded seat, Skyway logo dicecaps, Cheng shin tyres!!, Tuffs, ODI lever covers, Ame Grips

Paul

[justin]

Here is my Mk2 Super Tuff :

She is a 1984 100% factory spec build 

It has all nos and minty parts and the f/f has been fully re plated and super chromed 

Spec list :

84 Mk2 Frame and Forks & bars
Nos tange Grips
Nos chain tensioners
Nos gold kmc chain
Polished SR ms-422 Stem
Nos Tange AW-27 1"  Headset 
Refurb Dia Compe calipers & Nos Tech 3 levers 
Nos Sugino 1 Piece Crank
Refurb Tange BB
Nos Sugion Spider
Refurb Sugino 40t Chain Wheel/guard
Nos maxi cross pedals
Nos Suntour Seat Clamp
Nos Cr-Mo Seat Post
Refurb aeroyal
Nos fleccie set
Refurb Alloy-hubbed Skyways
Nos cheng shin Tyres f/t combi





Hope yous like