Author Topic: TARNISHED ALLOY (Read 749 times)

Swivel · « **on:** August 17, 2009, 02:14 PM »

Anyone know how to remove tarnish from Alloy without highly polishing it? I don't want a highly polished finish as the chainring wasn't like that originally, but it does have some little black tarnish marks all over it which I want to remove. Any ideas? I will try good old soap and water 1st but I doubt that'll clear em up.

Any help appreciated.

Matt

graeme · « **Reply #1 on:** August 17, 2009, 02:35 PM »

what finish did it have originaly?

Was it laquered or anodised?

MartyC · « **Reply #2 on:** August 17, 2009, 02:52 PM »

If it's a ProNeck or TufNeck one they have a burnished type finish (SteveP uses a pummice stone/sharpening stone to get the same effect) and then they are silver or clear anodised. I'd try a light rub over with something like Peek or Meguairs Metal Polish before using Autosol

Swivel · « **Reply #3 on:** August 17, 2009, 03:13 PM »

Its laquered I believe, its a Haro Uni Directional Chainring, its NOS, but tarnished. I think Autosol maybe too strong as it'll start to give it that shiny look and that's what I want to avoid.

graeme · « **Reply #4 on:** August 17, 2009, 03:17 PM »

Whatever finish is on it, laquer you think, will need to come off. Any discolouration to the alloy will be under the finish.

It would then need re-finishing as stock (polished, diamond cut, brushed, whatever) then refinshing, in this case laquering.

Theres no other way really.