Author Topic: need seat clamp help (Read 2732 times)

QUADROPHENIA · « **on:** August 08, 2009, 02:23 PM »

got a little 1983 GT 20" mini, it needs a seat clamp, but a normal one dont fit, what size do i need ? has anybody got one ?

poolysheriff · « **Reply #1 on:** August 08, 2009, 02:29 PM »

Pete i have this same problem on 2 of my minis (Robo n CW) $:-\$

Sorry to be of no help at all

snav69 · « **Reply #2 on:** August 08, 2009, 03:12 PM »

Would a double clamp or hinged not do the trick

$:-\$

jT Racing · « **Reply #3 on:** August 08, 2009, 03:14 PM »

too big or small? i have some clamps that are different sizes by small amounts.

mark 2 · « **Reply #4 on:** August 08, 2009, 03:31 PM »

I've got one of those Pete, the one you grappled over the fence at mk. I built the tube up with electrical tape and got a dc hinged on it, that works fine. If not you could try a cut down seat shim on the outside

QUADROPHENIA · « **Reply #5 on:** August 08, 2009, 03:38 PM »

hinged or 2 piece are to big. so i aint got a clue tbh, fancy the bodge it idea of marks

mark send me that gt mini please, i like it

sid1972 · « **Reply #6 on:** August 08, 2009, 03:39 PM »

When I had one many moons back, I am sure a had a 'tange sc-2' on it...

got one the clamps, if you measure the dia I will check it out, against it, if its any help....

QUADROPHENIA · « **Reply #7 on:** August 08, 2009, 03:42 PM »

it need to be tight chaps as i gotta get my daughter off her haro mini onto a decent bike before she goes mental, she did say the GT was cool

QUADROPHENIA · « **Reply #8 on:** August 08, 2009, 03:59 PM »

come on kids, there must be someone on here half clever

Mattdub · « **Reply #9 on:** August 08, 2009, 04:01 PM »

Would an early road bike one fit ? , kinda like Campy/Suntour/Shimano .............

Ask Steve Earl what he has on his chubby

sawzall · « **Reply #10 on:** August 08, 2009, 04:09 PM »

pete rickman made a shim to fit over seat tube which made up the difference
on seat clamp it was just a bit of tube with a slit in it or take a look on ebay
for a dk split seat clamp made for minis

sid1972 · « **Reply #11 on:** August 08, 2009, 04:10 PM »

The 1983 Gt mini in BMXMUSEUM has an Dia mx hinged job!

Not sure if its tight or not....

mark 2 · « **Reply #12 on:** August 08, 2009, 04:17 PM »

Hold tight, I remember I bought another GT mini years ago with a clamp fitted, it had a split shim fitted inside. Fook knows if I've still got it but I'll go digging....

*UPDATE - Not found it

It may turn up , my junk room is sky high with unorganised crap. Found 4 mx 1000's, dx's, boxed forklifter stem, a burnished ripper among a ton of other bits....not a bad rummage.

jT Racing · « **Reply #13 on:** August 08, 2009, 07:39 PM »

found them, there are these tange clamps that are too small for a normal bmx. they measure a little over 20mm inside. one was shoehorned onto a showpony the other is lightly used.
nice blue clamps. LMK if your interested

QUADROPHENIA · « **Reply #14 on:** August 08, 2009, 07:50 PM »

send it down old pal....with the other bits

jT Racing · « **Reply #15 on:** August 08, 2009, 07:54 PM »

ok, will do.
now where's my pistons

QUADROPHENIA · « **Reply #16 on:** August 08, 2009, 07:56 PM »

Quote from: J.T.Racing on August 08, 2009, 07:54 PM

ok, will do.
now where's my pistons

the geezer wont speak to me, have you upset him ?

QUADROPHENIA · « **Reply #17 on:** August 13, 2009, 06:22 AM »

Quote from: J.T.Racing on August 08, 2009, 07:39 PM

found them, there are these tange clamps that are too small for a normal bmx. they measure a little over 20mm inside. one was shoehorned onto a showpony the other is lightly used.
nice blue clamps. LMK if your interested

WAITING..........your upsetting my daughter now john, look at the time, she has already had a go at me this morning

Mattdub · « **Reply #18 on:** August 13, 2009, 08:49 AM »

Quote from: QUADROPHENIA on August 13, 2009, 06:22 AM

Quote from: J.T.Racing on August 08, 2009, 07:39 PM
found them, there are these tange clamps that are too small for a normal bmx. they measure a little over 20mm inside. one was shoehorned onto a showpony the other is lightly used.
nice blue clamps. LMK if your interested

WAITING..........your upsetting my daughter now john, look at the time, she has already had a go at me this morning

uh oh ! , don't upset little Mia ..... $:-\$