Author Topic: from nasty to nice suntour stem (Read 2060 times)

neiljonarcus · « **on:** July 30, 2009, 02:21 PM »

notice the ali casting marks "yack"

now no casting marks and blingdiddleding "SEND ME YOUR HOME ADDRESS MISTER " you know who you are

crazycraig · « **Reply #1 on:** July 30, 2009, 02:30 PM »

Nice !!

Deano · « **Reply #2 on:** July 30, 2009, 02:36 PM »

N2cus i love your polishing work mate.

Envious to buggry to be honest.

neiljonarcus · « **Reply #3 on:** July 30, 2009, 03:07 PM »

deano as long as you have all the right stuff its easy " i can do it any one can "

mark 2 · « **Reply #4 on:** July 30, 2009, 03:44 PM »

Here's a tip for anyone doing that - ovenpride it first to get rid of the anno clear coat, your at least straight on to polishing the bare metal then rathaer than pissing about for ages longer polishing that stuff out first. Same with a lot of silver parts, flight chainwheels etc...

meticulous · « **Reply #5 on:** July 30, 2009, 04:00 PM »

oh well!!! thats another nice original stem knackered up.........

neiljonarcus · « **Reply #6 on:** July 30, 2009, 04:03 PM »

i agree sam ... i wish i hadn,t of done it now . just waiting for the god dam

neiljonarcus · « **Reply #7 on:** July 30, 2009, 04:10 PM »

and as for oven pride thats for puffs . caustic soda ...breath plenty in when you are doing it make sure it gets on ya skin then drink whats left ... does the job of stripping anno in about 2 mins . oven pride in a bag and wait and wait and wait and wait and wait and wait and wait and wait and wait and wait and wait and wait ...just go back and check on the stem and wait and wait and wait and wait and wait and wait and wait and wait and wait and wait and wait and

Deano · « **Reply #8 on:** July 30, 2009, 04:47 PM »

Nice tips guys, and neil ill do what you said and get some good mops etc.....

Feel free to ruine any of my metal parts anytime

Just started back on them damb alloys, iv gone from 180 grit-240-360-600-1000-2000. I look like a bond vilan (silver skin) lol

neiljonarcus · « **Reply #9 on:** July 30, 2009, 04:49 PM »

bigfatolly · « **Reply #10 on:** July 30, 2009, 05:48 PM »

nothing wrong with polishing parts if they are a bit knacked,its a good way of doing builds on a budget,

i have one on the go now with mostly polished parts that i bought cheaply cos they were scratched and/or had faded anno

wizardofcov · « **Reply #11 on:** July 30, 2009, 05:53 PM »

yo bling da la bling me want one....

dannywhiteley · « **Reply #12 on:** July 30, 2009, 06:00 PM »

Good work with the polishing mop, but personally I prefered the original finish. Looked better before IMO.

dordymush · « **Reply #13 on:** July 30, 2009, 10:33 PM »

i went through this polished everything stage myself.
but them saw steve p's stem he restored with a cherry stone and i've now gone the back to how it was.fooking loads harder to do as well

nowt wrong with a bit of shiney though

jimmyp · « **Reply #14 on:** July 31, 2009, 12:36 AM »

Great work as ever, is it poss you could do some pro class wheels for me m8, $:-\$ $:-\$

bobafett · « **Reply #15 on:** July 31, 2009, 12:48 AM »

Bling a ding ding Neil

The master polisher at work again

neiljonarcus · « **Reply #16 on:** July 31, 2009, 06:26 AM »

thanks johngoose . i must admit i haven,t polished anything for a while . forgot how much i like seeing the end result

AND I LIKE FOOK EVERY ONE ELSE

ozone · « **Reply #17 on:** July 31, 2009, 07:46 AM »

Quote from: n2cus on July 31, 2009, 06:26 AM

thanks johngoose . i must admit i haven,t polished anything for a while . forgot how much i like seeing the end result

AND I LIKE FOOK EVERY ONE ELSE

What's not to like about that? Like you say, you have smoothed out all the casting and BLINGED an old stem to the max

Christ, even the logo survived this bout of polishing.

After all the work you put into that, most people would only pay around £20, shipped, for a used Suntour stem so it's a lot of work for the reward of a pint, maybe. Worth it, if it's for one of your builds though

neiljonarcus · « **Reply #18 on:** July 31, 2009, 08:17 AM »

Quote from: ozone on July 31, 2009, 07:46 AM

Quote from: n2cus on July 31, 2009, 06:26 AM
thanks johngoose . i must admit i haven,t polished anything for a while . forgot how much i like seeing the end result

AND I LIKE FOOK EVERY ONE ELSE

What's not to like about that? Like you say, you have smoothed out all the casting and BLINGED an old stem to the max Christ, even the logo survived this bout of polishing.

After all the work you put into that, most people would only pay around £20, shipped, for a used Suntour stem so it's a lot of work for the reward of a pint, maybe. Worth it, if it's for one of your builds though

no its for some one off hear . he bought it and just got it sent straight to me to be polished

thanks for your backing in this war of polishing

ozone · « **Reply #19 on:** July 31, 2009, 08:44 AM »

Quote from: n2cus on July 31, 2009, 08:17 AM

Quote from: ozone on July 31, 2009, 07:46 AM
Quote from: n2cus on July 31, 2009, 06:26 AM
thanks johngoose . i must admit i haven,t polished anything for a while . forgot how much i like seeing the end result

AND I LIKE FOOK EVERY ONE ELSE

What's not to like about that? Like you say, you have smoothed out all the casting and BLINGED an old stem to the max Christ, even the logo survived this bout of polishing.

After all the work you put into that, most people would only pay around £20, shipped, for a used Suntour stem so it's a lot of work for the reward of a pint, maybe. Worth it, if it's for one of your builds though

no its for some one off hear . he bought it and just got it sent straight to me to be polished thanks for your backing in this war of polishing

Like Ice Cube and NWA once said...

Fook the Police

Swivel · « **Reply #20 on:** July 31, 2009, 11:18 AM »

Looks fooking awesome Neil

dannywhiteley · « **Reply #21 on:** July 31, 2009, 11:04 PM »

Theres no need to take offence. Just a personal opinion mate.

boofy44 · « **Reply #22 on:** August 02, 2009, 01:30 AM »

drink a load of vodka then piss the bed,that will bring a shine up.

Deano · « **Reply #23 on:** August 02, 2009, 02:17 AM »

I think its worth far more than just a pint for polishing this up mate

Let the purists have the dull stems, you are what you keep

Me im bright n shiny through n through

Fancy doing my inlet manifold

neiljonarcus · « **Reply #24 on:** August 02, 2009, 07:54 AM »

dean send me a picture of the fannymould

Author Topic: from nasty to nice suntour stem (Read 2060 times)

neiljonarcus

Deano

neiljonarcus

mark 2

neiljonarcus

neiljonarcus

Deano

neiljonarcus

wizardofcov

dannywhiteley

neiljonarcus

ozone

neiljonarcus

ozone

dannywhiteley

Deano

neiljonarcus