Author Topic: at last new frame to play with "now with piccy,s (Read 1222 times)

neiljonarcus · « **on:** July 30, 2009, 11:34 AM »

1983 skyway TA curvered brake bridge usa

pretty grubby chrome has been painted over white .so off to the dipper to see what the chrome is like underneath the powder

and with seat stuck init agrhhhhhhhhhhhhhh

crazycraig · « **Reply #1 on:** July 30, 2009, 11:36 AM »

TTIUWP

snav69 · « **Reply #2 on:** July 30, 2009, 11:39 AM »

Quote from: CRAZYPAVING on July 30, 2009, 11:36 AM

TTIUWP

x2

neiljonarcus · « **Reply #3 on:** July 30, 2009, 11:41 AM »

speak english and dont be lazy "TYPE"

Kaner · « **Reply #4 on:** July 30, 2009, 11:41 AM »

Brilliant Neil. That will be a great little project

Looking forward to seeing some piccys when you get it dipped and polished up

crazycraig · « **Reply #5 on:** July 30, 2009, 11:45 AM »

This thread is useless without pictures

neiljonarcus · « **Reply #6 on:** July 30, 2009, 11:48 AM »

in work at the moment piccy,s at tea time boy,s

southern andy · « **Reply #7 on:** July 30, 2009, 03:27 PM »

Uni seat.

My favourite.

MartyC · « **Reply #8 on:** July 30, 2009, 03:34 PM »

how do you get a composite seat post stuck in a steel tubed frame?

A nice little project that, freestyle or race build?

neiljonarcus · « **Reply #9 on:** July 30, 2009, 04:05 PM »

i am hoping to do a frrestyle signature bike . but some of the parts are looking like i will never get my hands on them . and i hate having a frame sitting around

dannywhiteley · « **Reply #10 on:** July 30, 2009, 06:02 PM »

Wouldve swapped that for my oriignal 8/10 chrome curved bridge TA if the powder was good.

neiljonarcus · « **Reply #11 on:** July 30, 2009, 06:56 PM »

Quote from: dannywhiteley on July 30, 2009, 06:02 PM

Wouldve swapped that for my oriignal 8/10 chrome curved bridge TA if the powder was good.

why swop when you can powder your 8/10 one then theres no posting going on

dannywhiteley · « **Reply #12 on:** July 30, 2009, 08:13 PM »

I cant bring myself to powder such a nice survivor. Plus it would cost me £50 in powder plus postage each way.

dordymush · « **Reply #13 on:** July 30, 2009, 10:28 PM »

Quote

how do you get a composite seat post stuck in a steel tubed frame?

i thought that too.
but the fooker that was stuck in my patterson took me hours to get out and that was only after i sawed it in peices and had to prise it out.
right bastid of a job.
hope yours is easier

Biggeorge · « **Reply #14 on:** July 31, 2009, 02:58 PM »

nice that fella, what are you gonna do then? a Dave Young sig?
Giz a shout with your wish list and I'll keep me eyes open.

neiljonarcus · « **Reply #15 on:** July 31, 2009, 03:09 PM »

I THINK I AM SACKING THE DAVE YOUNG SIG IDEA PARTS FAR TOO DEAR . PLUS SOME ONE HAS ASKED ME TO SELL THEM THE FRAME

bugger cap locks sorry

martylaa · « **Reply #16 on:** August 01, 2009, 08:50 AM »

what parts ya after and i'll keep me eyes peeled for em

neiljonarcus · « **Reply #17 on:** August 01, 2009, 11:31 AM »

frame has deffo gone now marty cheers anyway mate . but i am doing a new one on the hunt for some blue mx 1000,s and a blue mx kashimax seat

CD17 · « **Reply #18 on:** August 01, 2009, 12:52 PM »

I think a lot of the factory White TA were Chrome underneath, so this could be original finish

neiljonarcus · « **Reply #19 on:** August 01, 2009, 01:24 PM »

going by the frame number i think it was chrome built

Author Topic: at last new frame to play with "now with piccy,s (Read 1222 times)

neiljonarcus

snav69

neiljonarcus

neiljonarcus

neiljonarcus

dannywhiteley

neiljonarcus

dannywhiteley

neiljonarcus

martylaa

neiljonarcus

neiljonarcus