Author Topic: A bit of Resto on some Araya 24" ! (Read 1367 times)

brass monkey! · « **on:** July 07, 2009, 09:13 PM »

I finally have some new wheels for my Floval Looptail, after getting some bargain used wheels from Dan Diesel,

After a strip and polish.....by my mate Kev (hotplate on RAD) they looked like this....

After Anno finish, and then Stidds awesome building skills

BIG BIG THANKS To; Sean (Stidds)

Kevin (Hotplate)

and Dan Diesel,

plus Mattdub for the Annodising advise

snav69 · « **Reply #1 on:** July 07, 2009, 09:22 PM »

Blinding restoration that Matt

brass monkey! · « **Reply #2 on:** July 07, 2009, 09:25 PM »

Quote from: snav69 on July 07, 2009, 09:22 PM

Blinding restoration that Matt

Thanks Paul, did it all meself really !

snav69 · « **Reply #3 on:** July 07, 2009, 09:34 PM »

Thought so

QUADROPHENIA · « **Reply #4 on:** July 07, 2009, 09:45 PM »

very nice matt

Mattdub · « **Reply #5 on:** July 07, 2009, 10:16 PM »

That cooker needs cleaning !

Oh , nice wheels too !

Gashead · « **Reply #6 on:** July 07, 2009, 10:22 PM »

Advise.................................... Mattdubb...............................................

brass monkey! · « **Reply #7 on:** July 07, 2009, 10:39 PM »

Quote from: Gashead on July 07, 2009, 10:22 PM

Advise.................................... Mattdubb...............................................

it was a chat really, not much else !!

couldn't get him off the phone,....he could talk the back legs off a donkey

brass monkey! · « **Reply #8 on:** July 07, 2009, 10:40 PM »

Quote from: Mattdub on July 07, 2009, 10:16 PM

That cooker needs cleaning !

I'll tell Stidds

Gashead · « **Reply #9 on:** July 07, 2009, 10:40 PM »

Thats Matt

brass monkey! · « **Reply #10 on:** July 07, 2009, 10:42 PM »

Quote from: Gashead on July 07, 2009, 10:40 PM

Thats Matt

he's a top lad.....and talking to me again after spilling the beans about his *** Build

subversion · « **Reply #11 on:** July 07, 2009, 11:03 PM »

Nice job but the valve hole looks like it's in the wrong place?

Steve P · « **Reply #12 on:** July 07, 2009, 11:23 PM »

Very tasty ... nice wheels Matt

NORTY40 · « **Reply #13 on:** July 07, 2009, 11:52 PM »

Top job that mate

Who did the annodising for you ?

bobafett · « **Reply #14 on:** July 08, 2009, 09:34 AM »

Quality resto job

double chevron · « **Reply #15 on:** July 08, 2009, 10:33 AM »

Result !!! What a chef you are Matt !!
That's some nice cooking for sure

diesel · « **Reply #16 on:** July 08, 2009, 11:10 AM »

looking good

brass monkey! · « **Reply #17 on:** July 08, 2009, 12:05 PM »

Quote from: subversion on July 07, 2009, 11:03 PM

Nice job but the valve hole looks like it's in the wrong place?

valve hole is in the rught place, decal is in the wrong place, to cover a slight blimmer !

subversion · « **Reply #18 on:** July 08, 2009, 01:29 PM »

Quote from: monkeybiscuits! on July 08, 2009, 12:05 PM

Quote from: subversion on July 07, 2009, 11:03 PM
Nice job but the valve hole looks like it's in the wrong place?

valve hole is in the rught place, decal is in the wrong place, to cover a slight blimmer !

Cool, it just looked like the spokes were crossing over the valve hole from the photo angle

torkertony · « **Reply #19 on:** July 08, 2009, 03:19 PM »

Top bit of resto Matt - looking good! Now lets see the rest of yer iron horse....

chichi · « **Reply #20 on:** July 09, 2009, 11:50 AM »

Wow top job that and nice hubs too

Right time to get to work on my 24s

Dingobmxer · « **Reply #21 on:** July 10, 2009, 05:05 AM »

Quality that Matt

DINGO

Author Topic: A bit of Resto on some Araya 24" ! (Read 1367 times)

snav69

snav69

subversion

subversion

torkertony

chichi