gfxgfx
 
logo
 
gfx gfx
gfx
975806 Posts in 138943 Topics by 6363 Members - Latest Member: V6 DOW November 24, 2024, 11:46 AM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Very quick question
gfx
gfxgfx
 

Author Topic: Very quick question  (Read 855 times)

0 Members and 1 Guest are viewing this topic.

dannywhiteley

  • Guest
Very quick question
« on: May 11, 2009, 08:06 PM »
Are these standard sized chain ring bolts?  I.e. Will they fit a power disc and chainring?  They are labelled as 'double' sized.

« Last Edit: May 11, 2009, 08:09 PM by dannywhiteley »

fouronethreeoh!

  • Guest
Re: Very quick question
« Reply #1 on: May 11, 2009, 08:13 PM »
Short answer, no.
Double ring bolts are too long and dont clamp up single ring/spider.
They can be "adjusted" to work if you are a bit handy with a file.

dannywhiteley

  • Guest
Re: Very quick question
« Reply #2 on: May 11, 2009, 08:25 PM »
Or a hacksaw?  Could you take a few mm off each one to enable them to tighten up a single disc and ring?

fouronethreeoh!

  • Guest
Re: Very quick question
« Reply #3 on: May 11, 2009, 08:29 PM »
Yes, just shorten the nut part, not the bolt  ;)

trasher

  • Guest
Re: Very quick question
« Reply #4 on: May 11, 2009, 08:52 PM »
ill let you know danny ,,i bought some of the bay last night  :bondage: :daumenhoch:

Juju

  • Guest
Re: Very quick question
« Reply #5 on: May 11, 2009, 08:53 PM »
I suppose you could, if you had lots, pack the bolt head side out with little washers...

ok, it was a silly idea.... but the initial reply is correct, single ring bolts are what you need. Not thateasy toget unless you lbs is into "singlespeed and fixies".  Or old school bmx. When I went into my lbs asking for bolts for a spider, they looked as if I'd walked off the set of Ashes to Ashes, the kids lolled and said BMX haven't come with seperate spiders since they were born, basically......

I left feeling very old indeed.........

trasher

  • Guest
Re: Very quick question
« Reply #6 on: May 11, 2009, 08:59 PM »
p.s this was in the listing i bought off

 These are suitable for double chainrings, single ring and bash ring or the two outer rings of a triple.    :-\

dannywhiteley

  • Guest
Re: Very quick question
« Reply #7 on: May 11, 2009, 09:18 PM »
Looks like you could either cut down the nut part a few mm, or use standard nuts off a regular set (they arent that visible anyway).  The bolt part would extrude slightly out the back, but nothing really to worry about.

gossa

  • Guest
Re: Very quick question
« Reply #8 on: May 11, 2009, 09:58 PM »
Yep they are a bit too long but very soft alloy so just file em down, shouldn't take a minute.  It would be much more difficult to saw them, got a dremel or a bench grinder?

dannywhiteley

  • Guest
Re: Very quick question
« Reply #9 on: May 11, 2009, 10:01 PM »
Can get my dremmel on the job... :D

Love a bit of BMX DIY.  Its too easy when things fit first time anyway... :LolLolLolLol:

gossa

  • Guest
Re: Very quick question
« Reply #10 on: May 11, 2009, 10:17 PM »
alloy chainring bolts are so soft you could probably chew them down!

RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Very quick question
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal