Chewed up allen key?

[mark 2]

Don't know why I never thought of this before....grind the chewed bit down to some fresh meat. Voila. I thank you.......

[teamsano]

strangely enough, i performed this 'mod' the other week too! lolZZ

[lodge]

Try this with a hacksaw and you will understand the meaning of hardened steel. 

[Gary72]

Try this with a hacksaw and you will understand the meaning of hardened steel. 

Try cutting down Odyssey pegs

[CD17]

Buy decent allen keys & you won't have to 

I use the Bondhus ones they are the best, they last forever 

[buzzlightyear05]

Buy decent allen keys & you won't have to 

I use the Bondhus ones they are the best, they last forever 

Ill secong that i use them at work, 3 years of using a 6mm Bondhus every day and its still perfect. They will also swap for a new one if you manage top mangle one FOC to.

[dbone]

This is how i extract chewed up allen heads,take a metal blade  put it in a hacksaw make sure its in the right way teeth facing the right way and cut a slit in the allen head then get a screwdriver and turn out as you would take out a screw ...job done.

[MartyC]

This is how i extract chewed up allen heads,take a metal blade  put it in a hacksaw make sure its in the right way teeth facing the right way and cut a slit in the allen head then get a screwdriver and turn out as you would take out a screw ...job done.

Easier way is to hammer a torx head into the allen head and undo 

[buzzlightyear05]

Cant go wrong with a set of these in your tools box if you round out the head 

http://cgi.ebay.co.uk/Facom-Broken-Sheared-Stud-Extractor-Set_W0QQitemZ310136126030QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item310136126030&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A16%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50

[dbone]

them are easy outs.......thats when one snaps the head off completely ....still good to have in ones toolbox.

[dj_benice]

bunch of men showing off their tools..... sounds like the late night shenanigans at MK   

[teamsano]

Try this with a hacksaw and you will understand the meaning of hardened steel. 

i used a hacksaw, and it was no probs, maybe my blade was on the correct way?

[CD17]

Try this with a hacksaw and you will understand the meaning of hardened steel. 

i used a hacksaw, and it was no probs, maybe my blade was on the correct way?

Maybe you were cutting cheap $hit allen keys