Author Topic: Gen1 update (Read 2520 times)

gmac · « **on:** February 16, 2006, 10:24 PM »

Finally got the flight arms back from the chromers, so I did a bit more assembly tonight.

Comp III's swapped for Comp ST's

Redline 401 - 180mm cranks

Shotgun II seat

Grab-On MX3 grips

Skyway Tuff pads

Also popped a flexfighter on there. Any opinions on these ? Good or not good ? I'm thinking it might look better if I cut it down a bit ?

Still a few bits to do like, sort out the crank arm bolts, and sort out some pedals and a chain.

Cheers

Guy

Moose · « **Reply #1 on:** February 16, 2006, 10:35 PM »

Is that a real Gen1?

danny silverstreak · « **Reply #2 on:** February 16, 2006, 10:36 PM »

sweet mr daley

gmac · « **Reply #3 on:** February 16, 2006, 10:37 PM »

Quote from: Moose on February 16, 2006, 10:35 PM

Is that a real Gen1?

Yes

Moose · « **Reply #4 on:** February 16, 2006, 10:42 PM »

Oh, just wondered as the gusset weld looks a bit 'poopy' for a Gen1 - has it been re-welded?

gmac · « **Reply #5 on:** February 16, 2006, 10:44 PM »

It's just where the camera flash reflected off the chrome. It's actually a nice neat Haro weld

Mattdub · « **Reply #6 on:** February 16, 2006, 10:48 PM »

Looks nice Guy ,

I'd shorten the flexfighter

Matt

daz bmx it! · « **Reply #7 on:** February 16, 2006, 10:48 PM »

Looks sweet as Guy,get a bit of wire wool on that flite crank bolt thats all

gmac · « **Reply #8 on:** February 16, 2006, 10:49 PM »

Steve P · « **Reply #9 on:** February 16, 2006, 10:57 PM »

That looks awesome Guy . . . . definitely lower that FlexFighter and buff the chainwheel for ultimate perfection

Ignore me though mate . . . I'm just fookin jealous

Steve

theRuler · « **Reply #10 on:** February 16, 2006, 11:05 PM »

looks hot
ditch the flex fighter and drop the stem right down, if it'll go.

FuNMoNsTeR · « **Reply #11 on:** February 16, 2006, 11:10 PM »

Ouch my eyes

Lovely Job m8.... coming on strong.

Moose · « **Reply #12 on:** February 16, 2006, 11:14 PM »

Quote

It's just where the camera flash reflected off the chrome. It's actually a nice neat Haro weld

Ah, I see it now, sorry about that

Looks great anyway, I was thinking of buying one of those flex fighters, but I think I'm going to make my own.

Do me a favour, PM your serial number, please? I started a kind of 'database' of Gen 1 serial numbers in an attempt to decipher them (without much success so far)

billstup · « **Reply #13 on:** February 16, 2006, 11:18 PM »

Anybody got one of the very first Gen 1`s which never had the welding between the bottom of the gusset and head tube ?

Btw one of mine has the serial number TPP1748F, but you`ll have to ask ORB for the other

FuNMoNsTeR · « **Reply #14 on:** February 16, 2006, 11:32 PM »

Quote from: daz bmx it! on February 16, 2006, 10:48 PM

Looks sweet as Guy,get a bit of wire wool on that flite crank bolt thats all

I was told this would remove rust.... steel wool and some wd40... i didnt try it as i thought they were pulling my chain. Wont it scratch the chrome to death?

Moose · « **Reply #15 on:** February 16, 2006, 11:38 PM »

Quote

Btw one of mine has the serial number TPP1748F

Cheers Billy

greentoad · « **Reply #16 on:** February 16, 2006, 11:42 PM »

Hi, It looks sweet Guy.

Not too keen on the flexfighter though.

Grafight X Pedals would look a minter on that.

(NB - You get many different grades of wire wool, you have to get it from an old boy diy shop and get real fine! NOT the halfords 5 different bits in 1 bag stuff, that is still course)

Nice build, you just goota love a Haro.

Whats the Haro serial codes mean?

I know that T is Torker Built, F is Freestyler, M is Master etc, but what is the PP?

J.

Holmetech · « **Reply #17 on:** February 16, 2006, 11:44 PM »

pp=piss poor.
only joking!

Moose · « **Reply #18 on:** February 16, 2006, 11:45 PM »

Quote

but what is the PP?

Ah ha, the $64.000 question

rakas17 · « **Reply #19 on:** February 17, 2006, 02:43 AM »

that looks dope, you must have a spare set of dx's to put on that, you had about four sets of caps off me..

and my gen 1's serial number is....TNN2366 F

gmac · « **Reply #20 on:** February 17, 2006, 08:50 AM »

I've got a few pairs of DX's, but they all need work. I've also got a NOS pair of MKS Grafights, but they are 1/2 inch

Swapsies anyone

Bren Gunn · « **Reply #21 on:** February 17, 2006, 09:21 AM »

Nice bike mate, looks great.

lovely touch... the mini cable tie ( cool find )

Blue or chrome rat traps... it's the only pedals for that bike, and don't polish that chain wheel, it's supposed to look like that

Bren

Moose · « **Reply #22 on:** February 17, 2006, 10:52 AM »

Quote

and my gen 1's serial number is....TNN2366 F

Cool thanks - could I have a picture also?

ORB · « **Reply #23 on:** February 17, 2006, 11:12 AM »

Sir Moose, i am not sure if you have this on the list?

theRuler · « **Reply #24 on:** February 17, 2006, 11:21 AM »

zat yours orb?

Author Topic: Gen1 update (Read 2520 times)

gmac

gmac

gmac

daz bmx it!

gmac

theRuler

FuNMoNsTeR

FuNMoNsTeR

greentoad

Holmetech

rakas17

gmac

Bren Gunn

theRuler