gfxgfx
 
logo
 
gfx gfx
gfx
975791 Posts in 138942 Topics by 6363 Members - Latest Member: Bmxflex November 11, 2024, 05:41 PM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  tensioners
gfx
gfxgfx
 

Author Topic: tensioners  (Read 826 times)

0 Members and 1 Guest are viewing this topic.

telelogic

  • Guest
tensioners
« on: April 13, 2009, 03:34 PM »
Anyone know of a 10mm chain tensioner that will work with pegs?

I'll be using a 10mm to 14mm shim to bring my axle up to the size of my dropouts, so need something flat.

JT71

  • Guest
Re: tensioners
« Reply #1 on: April 13, 2009, 03:39 PM »
colony do a peg, alloy, with a tensioner built in,  not sure if they do them 10mm though.

telelogic

  • Guest
Re: tensioners
« Reply #2 on: April 13, 2009, 03:46 PM »
they won't fit :(

the axles on my tuffs are too short.

plus the fact that part of that peg sits in the dropout which will be full of my shim.

HEYWOOD BMX

  • Guest
Re: tensioners
« Reply #3 on: April 13, 2009, 04:35 PM »
  Someone used to make a tensioner with built in-10to 14mm spacer.Think it was ID, Billys might still have some in stock.
« Last Edit: April 13, 2009, 04:53 PM by HEYWOOD BMX »

rarman1

  • Guest
Re: tensioners
« Reply #4 on: April 13, 2009, 04:55 PM »
take the flange of the axle convertor to make a shim that sits inside the dropout,

then use a 10mm tensioner and 10mm peg :daumenhoch:

Offline lazychubs

  • Founding Fathers
  • BMX Nerd
  • *
  • Posts: 4309
  • Rated:
Re: tensioners
« Reply #5 on: April 13, 2009, 06:34 PM »
stupple ran pegs on his t1 when he went new skool
no tensioners tho but pegs kept coming off as axles wasnt long enuf
so be carefull

JT71

  • Guest
Re: tensioners
« Reply #6 on: April 13, 2009, 06:44 PM »
let me have a looky in my garage, i reckon i might have a pair of tensioners with a 10mm hole and slot to make them fit a 14mm dropout, but i might be wrong.


JT71

  • Guest
Re: tensioners
« Reply #7 on: April 13, 2009, 08:26 PM »
okay, I have in my possesion a pair of tensioners, 10mm hole but a built in 10mm to 14mm adapter.

however the washer part is very thick, and the thread is very long, but that could be shortened.

any use to you?


Bettyswallocks

  • Guest
Re: tensioners
« Reply #8 on: April 13, 2009, 11:03 PM »
I'd be wary of running a 10 to 14mm shim and pegs you'll deffo bend the axles...  :(

telelogic

  • Guest
Re: tensioners
« Reply #9 on: April 14, 2009, 12:35 PM »
okay, I have in my possesion a pair of tensioners, 10mm hole but a built in 10mm to 14mm adapter.

however the washer part is very thick, and the thread is very long, but that could be shortened.

any use to you?



I'd love to give those a go :daumenhoch:

send me a pm letting me know what I owe ya'

rarman1

  • Guest
Re: tensioners
« Reply #10 on: April 14, 2009, 10:56 PM »
or try 10 - 14mm axle convertors (the ones that screw on) they work perfect on my nankai hub :daumenhoch:

Offline pickle

  • Site Supporter
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • Rated:
Re: tensioners
« Reply #11 on: April 15, 2009, 08:01 AM »
or get proper wheels and dump the Tuffs?   ???

RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  tensioners
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal