Author Topic: Hutch Trickstar (Read 2574 times)

oldschool rider · « **on:** April 10, 2009, 09:07 PM »

Ok guys I'm lookin for a date for my Trickstar and I'm sure one of the Guru's in here will know a thing about Hutches.

the serial number is 0746371

any help would be appriciated

Cheers,
Steve.

CD17 · « **Reply #1 on:** April 10, 2009, 09:19 PM »

Can you post a pic

Does it have a Baseball symbol

They were made in US in 84, Japan 84-85 & Taiwan 85 on I think

& they were all a little bit different, there was a link on here sometime ago where all the changes were listed, someone may have it

oldschool rider · « **Reply #2 on:** April 10, 2009, 09:39 PM »

There is no baseball symbol,
And I guess it must have been on here I looked at a list of Hutch serial nºs but can't remember, I seem to recall it was a USA made '86.(But maybe that's just my memory playing with me)
The serial number is on the left rear dropout on the bottom.

will post pic's when I can.

Thanks for the help guys,
Steve.

CD17 · « **Reply #3 on:** April 11, 2009, 03:38 PM »

Quote from: Glen on April 10, 2009, 09:28 PM

Its a USA made frame if there is no baseball symbol, show us a pic, easier that way

Only the Jap ones had a Baseball Symbol, so it could be Taiwan

The platform around the seat tube is a little different as well.

oldschool rider · « **Reply #4 on:** April 13, 2009, 09:36 AM »

Hi Guys,
Ok here are some pics, Now regarding the brake bridge stamping although it doesn't show in pic it appears that the "C" is a good one like the USA pic already sent by Glen, I have added pics of platform area as well to see if you can tell as I don't know about the differences in it.

Ok guys do your thing !

Cheers,
Steve.

CD17 · « **Reply #5 on:** April 13, 2009, 09:56 AM »

I think thats a US one then, here is a pic of my Taiwan one, see the platform is shorter

Also your forks do not have pegs, I think the early ones didn't have pegs

JAY · « **Reply #6 on:** April 13, 2009, 10:13 AM »

Know little about hutch,but how comes its got brake lugs on the chainstays and cable guides on the downtube?

oldschool rider · « **Reply #7 on:** April 13, 2009, 10:16 AM »

Yeah that's right the early ones didn't have fork pegs but did have 990 mounts on the bottomside of the chainstays and the annoying rear standers removed

Steve.

CD17 · « **Reply #8 on:** April 13, 2009, 10:17 AM »

Quote from: JAY on April 13, 2009, 10:13 AM

Know little about hutch,but how comes its got brake lugs on the chainstays and cable guides on the downtube?

I didn't spot that

Could have been added

HARODAVE · « **Reply #9 on:** April 13, 2009, 10:17 AM »

IIt must be a late one if it has 990 lugs ...always liked these b.i.t.d ...would love one now

oldschool rider · « **Reply #10 on:** April 13, 2009, 10:18 AM »

Quote from: JAY on April 13, 2009, 10:13 AM

Know little about hutch,but how comes its got brake lugs on the chainstays and cable guides on the downtube?

I got this frame and forks late '80's and the lad had the 990 mounts put on, rear standers cut off and I removed the fork standers.

Steve.

JAY · « **Reply #11 on:** April 13, 2009, 10:26 AM »

Makes sense,I done a lot of things like that in the 90's had a Raleigh aero pro,loved the frame length/size and i added brake lugs to that

....made sense at the time $:-\$

harris · « **Reply #12 on:** April 13, 2009, 10:33 AM »

its been used as a 90s flatland bike ,alot got done like that.nice

CD17 · « **Reply #13 on:** April 13, 2009, 07:01 PM »

Check out one of my Sports...........

This bike was ridden up until around the time I got it a few years ago

brass monkey! · « **Reply #14 on:** April 13, 2009, 07:04 PM »

DEFO a US made TS !

wanna sell

wildon · « **Reply #15 on:** April 13, 2009, 07:48 PM »

Quote from: monkeybiscuits! on April 13, 2009, 07:04 PM

DEFO a US made TS !

wanna sell

I've already closed the deal!

oldschool rider · « **Reply #16 on:** April 13, 2009, 08:14 PM »

Quote from: wildon on April 13, 2009, 07:48 PM

Quote from: monkeybiscuits! on April 13, 2009, 07:04 PM
DEFO a US made TS !

wanna sell

I've already closed the deal!

now now gents.

Steve.

brass monkey! · « **Reply #17 on:** April 13, 2009, 08:15 PM »

Quote from: oldschool rider on April 13, 2009, 08:14 PM

Quote from: wildon on April 13, 2009, 07:48 PM
Quote from: monkeybiscuits! on April 13, 2009, 07:04 PM
DEFO a US made TS !

wanna sell

I've already closed the deal!

now now gents.

Steve.

wildon · « **Reply #18 on:** April 13, 2009, 08:25 PM »

oldschool rider · « **Reply #19 on:** April 13, 2009, 08:48 PM »

Don't worry Terry I've got it guarded for you mate.

wildon · « **Reply #20 on:** April 13, 2009, 08:51 PM »

haha ... cheers

wildon · « **Reply #21 on:** June 05, 2009, 09:30 PM »

There you go Steve ... said i'd post up a pic when it was done. Had the cable guides and brake mounts removed. Also cleaned up the areas where the frame standers and pegs were removed .... metallic grey powder and new decals and it's ready to go!

oldschool rider · « **Reply #22 on:** June 05, 2009, 11:48 PM »

Nice Job Terry lookin really nice,

Have fun mate she was always a good ride

I can almost see that built up with chrome & Black parts

Steve.

QUADROPHENIA · « **Reply #23 on:** June 06, 2009, 06:59 AM »

very nice tel, is the no trickstar out there that is safe from living at tel's house ?

stuntmaster · « **Reply #24 on:** June 06, 2009, 09:47 AM »

different colour that and nice and yep usa trickstar and no they never did lugs on the trickstar `s only what people added on .