Author Topic: which gasket remover? (Read 491 times)

markyp · « **on:** March 11, 2009, 05:41 PM »

permatex is proving near impossible to get hold of here in the uk so does anybody know which ones will work as good as or dont work at all for stripping powder coating before i head off to halfords!!!cheers

stidds · « **Reply #1 on:** March 11, 2009, 05:57 PM »

I couldn't get hold of Pematex either, so I went to my local car body paint supply shop and bought some of their industrial chemical paint stripper. It removes anything and is used in exactly the same way as Nitromors, takes about 20 mins to start working and off comes paint or powder.

It cost me £20 for 5 litres.

markyp · « **Reply #2 on:** March 11, 2009, 06:50 PM »

cheers stidds,very helpful,this is turning into a mission now!!!!anymore for anymore?

HEYWOOD BMX · « **Reply #3 on:** March 11, 2009, 08:04 PM »

I recently stripped some powdercoated forks.Couldn`t get Pernmatex,so used some generic cheap stuff £3 a tin & it worked a treat.Reckon you`d need a 2 or 3 tins for a frame though.

munners · « **Reply #4 on:** March 11, 2009, 08:07 PM »

LOCTITE is the one boys.....

Never used Permatex but used others and LOCTITE was the best without a shadow.

Get it off the bay.

£4.

kev-s · « **Reply #5 on:** March 11, 2009, 10:05 PM »

why not take it to a local powder coaters and get them to strip it, my local one charges about £15 and it will save you time and mess

markyp · « **Reply #6 on:** March 11, 2009, 10:24 PM »

cheers for all the help guys,much appreciated

Author Topic: which gasket remover? (Read 491 times)

markyp

which gasket remover?

stidds

Re: which gasket remover?

markyp

Re: which gasket remover?

HEYWOOD BMX

Re: which gasket remover?

munners

Re: which gasket remover?

kev-s

Re: which gasket remover?

markyp

Re: which gasket remover?