Author Topic: mid bb bearings help! (Read 1599 times)

magna13 · « **on:** March 06, 2009, 05:04 PM »

hi.

the bearings on my 2hip are totally gone! it runs a mid-bb looseball design. i went down my local bike shop to get some and he said he's rang up 7 different places in the bristol area and nobody does them what so ever! so now im really p*ssed off, only had the bike what a month and a half and the bearings go! so what do i do? was thinking of get a FIT bike co. sealed mid bb for £15 new but really want some new looseballs... does anyone no where i can get them or am i having to go down the option of getting the sealled bb?

thanks zak

QUADROPHENIA · « **Reply #1 on:** March 06, 2009, 05:13 PM »

ask stodge zak

magna13 · « **Reply #2 on:** March 06, 2009, 05:13 PM »

ok pete.

Gary72 · « **Reply #3 on:** March 06, 2009, 11:14 PM »

Any luck, my son's new bike runs a looseball Mid BB, Kink Kicker, I did send Kink an email asking if it can be coverted to run sealed and have not had an answer

dodger · « **Reply #4 on:** March 07, 2009, 12:46 AM »

mate if u decide u want a sealed one il bring one allong for u for £15 its spanking new came with my salt cranks but not needed it as already had one fitted.

pickle · « **Reply #5 on:** March 07, 2009, 08:26 AM »

Zak.....go down the sealed route, they'll last ages compared to rubbish loose ball ones

dodger · « **Reply #6 on:** March 07, 2009, 08:45 AM »

as said they are sooo much easyer to work with and last loads more without servicing/replacing.

Gary72 · « **Reply #7 on:** March 07, 2009, 08:56 AM »

But wont he need a new spindle to run sealed bearings?

magna13 · « **Reply #8 on:** March 07, 2009, 03:48 PM »

so will i need a new spindle?? $:-\$

dodger · « **Reply #9 on:** March 08, 2009, 07:33 AM »

Quote from: Gary72 on March 07, 2009, 08:56 AM

But wont he need a new spindle to run sealed bearings?

not always i no of a few bikes that use a non threaded axle but still have caged/loose bearings just depends on the cranks.

magna13 · « **Reply #10 on:** March 08, 2009, 08:50 PM »

Quote from: dodger on March 08, 2009, 07:33 AM

Quote from: Gary72 on March 07, 2009, 08:56 AM
But wont he need a new spindle to run sealed bearings?

not always i no of a few bikes that use a non threaded axle but still have caged/loose bearings just depends on the cranks.

Hopefully i'll get away with not having to get a new spindle... $:-\$ $:-\$ heres the bike it needs to go on!

link: http://www.2hip.com/products_bikes_bizzle.html

dodger · « **Reply #11 on:** March 08, 2009, 09:05 PM »

i cant find a pic of the left side of the cranks if its just a pinch bolt design then u should be able to switch to sealed if its opc bb style with lockring then ither new bearings or new cranks

magna13 · « **Reply #12 on:** March 08, 2009, 09:19 PM »

Quote from: dodger on March 08, 2009, 09:05 PM

i cant find a pic of the left side of the cranks if its just a pinch bolt design then u should be able to switch to sealed if its opc bb style with lockring then ither new bearings or new cranks

Well it has a single pinch bolt design and its got the opc bb style with lockring so i'm still dont know if it will fit?? $:-\$ $:-\$

magna13 · « **Reply #13 on:** March 08, 2009, 09:32 PM »

Yes it looks like that. its 19mm but has different splines on the end.

magna13 · « **Reply #14 on:** March 08, 2009, 09:58 PM »

Ok Bru.

Gary72 · « **Reply #15 on:** March 08, 2009, 10:10 PM »

I'll get the boys Kink stripped and have a closer look.

magna13 · « **Reply #16 on:** March 08, 2009, 10:31 PM »

dodger · « **Reply #17 on:** March 08, 2009, 10:59 PM »

asling as thers no threads on the axle it will be all good

magna13 · « **Reply #18 on:** March 09, 2009, 06:50 PM »

ok bad news. the axle is threaded so it looks like no new sealed bb... but i can put my Primo Hollowbite crank set on but it has a 22mm axle. now my standard cranks are 19mm i think! so the question is will it fit and will any mid bb sealed bearings work?? $:-\$ $:-\$ $:-\$ $:-\$

pickle · « **Reply #19 on:** March 09, 2009, 06:54 PM »

your Primo's will fit but you'll need new 22mm bearings mate

magna13 · « **Reply #20 on:** March 09, 2009, 07:44 PM »

well i have the primo bearings and they're clever as they're like 2 bearings into one. one size is US BB and i dont know the other size? is it euro or mid?

?

Gary72 · « **Reply #21 on:** March 09, 2009, 10:07 PM »

A mid BB is normally just a US BB without the cups

Gary72 · « **Reply #22 on:** March 09, 2009, 10:09 PM »

Euro BB's are the threaded ones and the other common one is the Spanish; not sure what the spanish one is about though $:-\$

lazychubs · « **Reply #23 on:** March 09, 2009, 10:12 PM »

if the axle is 19mm just get the threaded bit machined down as i did it to me old haro cranks so i could run profile bearings
worked a treat

Gary72 · « **Reply #24 on:** March 10, 2009, 07:22 PM »

Just got a reply from Kink, the cranks on the Kicker can be converted to sealed but I would need a new spindle. They do the conversion kit for $30, includes bearings and spindle.

Author Topic: mid bb bearings help! (Read 1599 times)

magna13

magna13

dodger

dodger

magna13

dodger

magna13

dodger

magna13

magna13

magna13

magna13

dodger

magna13

magna13