Author Topic: cant find a srait seat post so...... (Read 1249 times)

steve Beech TA · « **on:** February 07, 2009, 11:16 PM »

Right then

cant find a strait seat post, ideally a renthal one

. So what i am thinking is to get a nice shiny LB post and cut the fu....r down to get what i want $:-\$ . Can this be done and have enough post left to do what its meant to do. then i can replace when i find what i want. What do peeps think or am i being impatient

.

cheers all steve

mamadirt · « **Reply #1 on:** February 08, 2009, 12:32 AM »

I've done if before with no problems . . . but then I've even been known to cut down old steel riser bars to make layback posts

steve Beech TA · « **Reply #2 on:** February 08, 2009, 07:22 PM »

I think i will hold out for a bit to see if any one comes up with a strait one

bobafett · « **Reply #3 on:** February 08, 2009, 08:20 PM »

As you can see in the pic below mate the straight posts from renthal came in short and long versions and i reckon a chopped layback one would be about the same size as a shorty in this pic. Try removing the decal (heat it with a hair dryer and peel off might work ?) so you can re-apply after chopping (probably be too high up after chopping) or see Del to knock up a newun

steve Beech TA · « **Reply #4 on:** February 08, 2009, 10:31 PM »

Cheers mate

i will look for both any one got a LB post

Rabdul06 · « **Reply #5 on:** February 09, 2009, 09:26 PM »

Ive been after a straight Renthal for ages - there was one on the bay a few weeks ago but I missed out to someone on here!! Good on them.

Also considered getting a LB and chopping it but dont think I can bring myself to hack it up. Let me know if you find a missing box of them somewhere.....