gfxgfx
 
logo
 
gfx gfx
gfx
975805 Posts in 138943 Topics by 6363 Members - Latest Member: V6 DOW November 23, 2024, 03:33 PM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Mid School BMX (>87) 1989 to 2003 (<05)  |  Mid School ( Keep the faith )  |  Clamp on Redneck mod … early GFR?
gfx
gfxgfx
 

Author Topic: Clamp on Redneck mod … early GFR?  (Read 1391 times)

0 Members and 3 Guests are viewing this topic.

SaMAlex

  • Guest
Clamp on Redneck mod … early GFR?
« on: January 05, 2009, 01:59 PM »

Here is a little something I found over the weekend. It’s a modification I did to a stem. No big deal now, but it was new at the time.

I never really liked the top plate on a gyro so when I changed over to a 1 1/8th frame, my old 1” gyro top plate didn’t fit the forks and I was forced to do something about it (“oversized” gyros weren’t all that available at the start of 1 1/8th, hence the 1” clamp-on forks). I got a stem (an early, square edge clamp on redneck, without the curved cut-out underneath for gyro clearance), and drilled and tapped the sided of it for cable adjusters. It was no where near as neat as the gyro friendly stems (with the built in gyro plate) that came out a bit later, but I really didn’t want to use the gyro top plate.

The only mistake I made was that I put the adjusters too high on the stem so the lower part of the gyro cable was too short to reach the gyro itself! Luckily, I used to shorten my lower cable anyway using clamp on nipples (well, spoke nipples and a vice), so I just left more inner cable above the nipple to cope with it.


Like I said, not a big deal now but I liked it at the time. Once the gyro friendly rednecks were out, I got one of them and they were much better.









Offline kev-s

  • 900 Air
  • ********
  • Posts: 3195
  • I bought a site tag and my girth increased by 10%
  • Rated:
Re: Clamp on Redneck mod early GFR?
« Reply #1 on: January 05, 2009, 02:48 PM »
cool i like homemade stuff :daumenhoch: :daumenhoch: sharp edged rednecks are 8) 8) 8) alex as you like to make/modify things to solve problems with your bike do u rekon you could make a cassette that engages and feels like a freewheel? its the only thing about new school bikes that i dont like :knuppel2: :knuppel2:

SaMAlex

  • Guest
Re: Clamp on Redneck mod early GFR?
« Reply #2 on: January 05, 2009, 02:55 PM »
alex as you like to make/modify things to solve problems with your bike


Na, not any more. No time, and not the same need as back then. My bike works, straight out of the box so Im happy to go with it (Even if the cassette does click like its going to slip from time to time)

JT71

  • Guest
Re: Clamp on Redneck mod early GFR?
« Reply #3 on: January 05, 2009, 03:05 PM »
My bike works, straight out of the box so Im happy to go with it (Even if the cassette does click like its going to slip from time to time)

glad that's not just mine that does that then.

neat mod too mr Leech.  :coolsmiley:

Offline kev-s

  • 900 Air
  • ********
  • Posts: 3195
  • I bought a site tag and my girth increased by 10%
  • Rated:
Re: Clamp on Redneck mod early GFR?
« Reply #4 on: January 05, 2009, 03:30 PM »
was worth a try, so your modiyfing days are over u have give us some great things :daumenhoch: :daumenhoch:

darkersomeday

  • Guest
Re: Clamp on Redneck mod early GFR?
« Reply #5 on: January 05, 2009, 03:31 PM »
want to swap it for my enduro gfr alex? :LolLolLolLol: :LolLolLolLol: :LolLolLolLol: :LolLolLolLol:

nifty mod that mate :daumenhoch:

Offline Philbert

  • Look Back
  • *****
  • Posts: 1204
  • Rated:
Re: Clamp on Redneck mod early GFR?
« Reply #6 on: January 05, 2009, 04:23 PM »
reminds me of bucknuttys!

i love you alex, you always make me smile

welsh denny

  • Guest
Re: Clamp on Redneck mod early GFR?
« Reply #7 on: January 05, 2009, 08:29 PM »
if frankenstein rode bmx freestyle, he'd run that stem.... :LolLolLolLol:

condor96

  • Guest
Re: Clamp on Redneck mod early GFR?
« Reply #8 on: January 05, 2009, 08:39 PM »
was your stem inspiration for gyro friendly rednecks?  8)

wirewheel

  • Guest
Re: Clamp on Redneck mod early GFR?
« Reply #9 on: January 05, 2009, 08:57 PM »
classic-vice/spoke nips them was da days :LolLolLolLol:
not had a gyro since got rid of that 1" standard lengthy

i dropped the gyro and front brake for good when i had the os ng dirtbike. that was still a tank.

Offline harris

  • Founding Fathers
  • Hoffman's Love Child
  • *
  • Posts: 23607
  • Rated:
Re: Clamp on Redneck mod early GFR?
« Reply #10 on: January 05, 2009, 09:00 PM »
cool mod alex,so simple but works  10/10

SaMAlex

  • Guest
Re: Clamp on Redneck mod early GFR?
« Reply #11 on: January 05, 2009, 10:53 PM »
was your stem inspiration for gyro friendly rednecks?


No, I dont think so. I didnt really show it to anyone, and I dont think rednecks were the first stem to come with a built in gyro plate. I forget what stem was, but I do remember being pleased that S&M did a GFR Redneck .... although that might have been just so I could get rid of my home made one!  :-[

noddybeard

  • Guest
Re: Clamp on Redneck mod early GFR?
« Reply #12 on: January 09, 2009, 06:49 PM »
Mr Leech yet another of your quality solutions/inventions.
This should be in the 'British Innovations to the BMX industry' thread...
I honestly believe you are more resposible for the state of BMX components that are around today than you give yourself credit for.

laughinggravy

  • Guest
Re: Clamp on Redneck mod early GFR?
« Reply #13 on: January 12, 2009, 04:17 PM »
Nice modded stem, did you use your asymmetric bars with that one?  ;)  :2funny:  :idiot2:  :LolLolLolLol: etc etc etc !!

SaMAlex

  • Guest
Re: Clamp on Redneck mod early GFR?
« Reply #14 on: January 12, 2009, 09:25 PM »
Nice modded stem, did you use your asymmetric bars with that one? 


Hey, come on. Who hasnt cut down their bars and accidently cut the SAME side down twice?  :crazy2:

(Well, no one nowadays as no one cuts their bars down any more)
« Last Edit: January 12, 2009, 11:33 PM by S&MAlex »

Offline TwoBobRob

  • Site Supporter
  • 900 Air
  • *
  • Posts: 3713
  • Rated:
Re: Clamp on Redneck mod early GFR?
« Reply #15 on: January 12, 2009, 09:45 PM »
I've heard of that many times as it goes   :LolLolLolLol:


RADBMX.CO.UK  |  Mid School BMX (>87) 1989 to 2003 (<05)  |  Mid School ( Keep the faith )  |  Clamp on Redneck mod … early GFR?
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal