Author Topic: BOTM Dec 2008 - Entries (Read 21162 times)

stidds · « **on:** December 15, 2008, 02:26 PM »

Tis the season for posting your December builds for BOTM!

Old and Mid school only please fellas....lets see those lovely never before seen builds!

Lets see your festive builds

Not too much spam either boys and girls, lets try to keep the waffle to a minimum, otherwise I will hunt you down and shoot you like a dog!!!!

joe6187 · « **Reply #1 on:** December 15, 2008, 03:10 PM »

1988 HARO TEAM MASTER

Parts brake down :
88 Haro master f/f, Haro kneesavers bar,
Haro Team freestyle stem, Gyro 1 system,
YST headseat, Peregrine seatclamp,
Peregrine 1gen 3 pcs cranks with sealed bearing BB,
Haro 44T sporket, Shimano DX pedal, Izumi chain,
Suntour 16T freewheel, DC 883 front brake, 990 rear brake,
Tech5 locking levers, Peregrine Super pro wheelset,
Peregrine Hp tires, Dominator seat, AME grips.

munners · « **Reply #2 on:** December 15, 2008, 03:12 PM »

That 3rd pic rocks.

Nice bike to start it off.

daz bmx it! · « **Reply #3 on:** December 15, 2008, 03:15 PM »

Here's my Ammaco Team Pro.this bike is absolutely stunninng in the flesh! hope the pic shows it a bit.F+F's is a kinda of Candy Apple red

all parts were nos when fitted,Polished Tuf neck stem,Polished Araya 7X's,Comp III's,Viscount aero ammaco seat,SR Turbo X crank,Chrome KKt pedals,tioga sealed B/B,Cal lite padset etc..this is one of my favorite builds,hope you like it

OrgasmDonor · « **Reply #4 on:** December 15, 2008, 06:34 PM »

early 90's CLAYBORN BACKBONE EXPRESS

boss pro bars (have since removed the surface rust off bars

)
nos dk pro stem
nos oddy t1000s with nos richie megabites
selle italia
pitbull 1 caliper
gt 180 profiles and ring

not everyones cuppa...but..
im lovin this:

torkertony · « **Reply #5 on:** December 15, 2008, 07:29 PM »

Gen 3 1984 Haro Sport.

Kasimax Aero - NOS
AM'E Tri Grips - NOS
Dia Compe MX 901's - NOS
Vector Bars - Re Chromed with new decals
Haro Tech Plate - NOS
Cali Lite Pad Set - NOS
Takagi Chain Wheel & Spider (NOS)
Yaban Chain - (NOS)
Tange Seat Clamp (NOS)
Tioga Comp III's - (NOS)
UKAI Rims - (NOS)
Shimano DX Hubs - (NOS)
Coke Caps - (NOS)
Redline Flights - (Twin Pinch)
Crupi Pedals

Thanks for looking & MERRY CHRISTMAS!!!

T.

neiljonarcus · « **Reply #6 on:** December 15, 2008, 07:49 PM »

what a stunning bike love it to bits well done

neiljonarcus · « **Reply #7 on:** December 15, 2008, 08:00 PM »

haro fst 85 white black and chrome ........ massive round of applause for "del" on this one again love these decals

torkertony · « **Reply #8 on:** December 15, 2008, 08:04 PM »

Sweet FST - the chrome in the decals really looks smart.

munners · « **Reply #9 on:** December 15, 2008, 08:05 PM »

Loving the use of alloyed hubbed tuffs this month lads.

Make a build look so much better than placky hubbed ones imo.

Torker tony's haro looks proper old skool (apart from the twin pinch!).

keep it lit! · « **Reply #10 on:** December 15, 2008, 08:42 PM »

cracking Clayborn Daz

don't think i've spied one before

Ade

stidds · « **Reply #11 on:** December 16, 2008, 06:25 AM »

Now I know I said keep the spam to a minimum, BUT.................

Daz, that Clayborn is a true thing of beauty.

OrgasmDonor · « **Reply #12 on:** December 16, 2008, 03:29 PM »

cheers for the comments dudes, as ive said in other thread, i just threw it together, its more a testament to the f/f more than anything else as how its turned out

clowntype · « **Reply #13 on:** December 17, 2008, 07:31 AM »

First build, pretty much everything stripped and repowdered (frame was bare '85 streetbeat), tange-tx-1200 forks (was gonna put my mity lites on it but they are such a work of art, too good to powder!)
custom streetbeat vinyls, fusion stem, crank, mx1000s inverted at the front, new gen skyways sealed bearing, odyssey post, hutch tricktop seat, suntour first gen seat clamp, diamondback ally chainring, second gen ezbars, stuck new tyres and thornproof innertubes on it 'cause i intended to ride it, but now i've done it, I don't want to wreck it. going on the bay today as it's just getting knocked about.

thanks to:
jt71 and rox
for bits and sh*t

meticulous · « **Reply #14 on:** December 17, 2008, 01:28 PM »

GT nora cup f+f+bars
ukai rims and shimano hubs
suntour seat clamp and stem
kashi aero seat
surgino 1 piece
diacompe mx 1000 and tech 2

sawzall · « **Reply #15 on:** December 17, 2008, 06:40 PM »

restored original pro hax from the early 80s with a restored mongoose motomag.

double chevron · « **Reply #16 on:** December 17, 2008, 06:55 PM »

Nice one Phil!!

Hack is the wrong side, though...

Oh errrrr.. forget it, you're british after all

DIRTBIKER250F · « **Reply #17 on:** December 17, 2008, 07:04 PM »

A real work of resto that Phil, amazing

dannywhiteley · « **Reply #18 on:** December 18, 2008, 09:42 AM »

Here we go, its been a while coming, but I think its good enough to enter now.

Rebel 24" Cruiser (once owned by Steve Bigland, Rebel factory rider). This is still a rider BTW.

Spec includes:

Reynolds 531 Rebel 24" frame & forks - powdered white
Reynolds 531 Rebel cruiser bars - powdered white
Suntour power stem
red Ukai 24" rims laced to gold Suntour hubs
Mitsuboshi Comp III green label tyres
Tagaki 175mm crank
black Suntour 42T chainwheel
Suntour XC-II pedals
black A'Me Tri's
black DC MX1000 with black DC Tech 4 lever and DC white cable
Reynolds 531 seatpost
black Kashimax Super leather seat
black Suntour seatclamp
Full repro padset

masterstint · « **Reply #19 on:** December 18, 2008, 09:58 PM »

1982 Cook Bros Racing /Claude Murphy

Frame: 1982 Cook Bros Racing
Fork/Stem: Cook bros Racing Uni-Clamp (clamps re-annodized/new hardware)
Headset: Cook Bros Racing
Handlebars: Cook Bros Racing
Grips: Grab On MX II
Brake Set: Dia Compe MX 900 w/ Mathauser Pads
Seat: Kashimax
Seat Post: Race Inc
Seat Clamp: Cook Bros Racing (re-annodized/new hardware)
Rims: Araya 7X
Hubs:Cook Bros Racing (flanges re-annodized/new hardware/bearings)
Freewheel: Suntour
Spokes: Stainless
Tires: Cycle Pro Snake Belly
Cranks: Cook Bros Racing 181 mm/original logo
Spider: Sugino
Chainwheel: Sugino
Chain: Izumi
BB: Cook Bros Racing (new bearings)
Pedals: Titron
Pads: Cook Bros Racing
Plate: Cook Bros Racing
Decals: (reproductions)

Special thanks to Steve @ Bullseye for the annodizing, and to Sam & the crew at Westbank Cyclery for building the wheels and for all their help!, Claude

JMCGT · « **Reply #20 on:** December 19, 2008, 06:21 AM »

Dam Claude...that is smokin hot...
better not use my trump card on this one...LOL
OK..GT Nora cup..

meticulous · « **Reply #21 on:** December 19, 2008, 04:35 PM »

both JMCGT's photos and masterstint photos are top class, are they took by professional photographers?...

masterstint · « **Reply #22 on:** December 19, 2008, 08:28 PM »

Quote from: meticus on December 19, 2008, 04:35 PM

both JMCGT's photos and masterstint photos are top class, are they took by professional photographers?...

thanks!!,,, i actually did my photos in my den,,,the photo studio I contacted wanted $500 for an hour so I figured I would give it a shot on my own,,,,I used a digital camera, tripod, and bought some vinyl material from a local cloth store $25, (I ended up "using" the other side of the material/backing/cotton side),,,I was pleased with the results,,it took a day of work but I learned a bunch about my camera and working my photo downloader program,,,claude

Gashead · « **Reply #23 on:** December 19, 2008, 08:38 PM »

woooooooooooo Cook Bros is just stunning !

No more entries chaps

Jt · « **Reply #24 on:** December 19, 2008, 09:23 PM »

just making up the numbers i think...

the frogangle, redone with some better stuff. Mint kashi, black tuf neck, some xc11, and some NOS araya aero with nos comp3 etc....

Author Topic: BOTM Dec 2008 - Entries (Read 21162 times)

joe6187

munners

daz bmx it!

torkertony

neiljonarcus

neiljonarcus

torkertony

munners

keep it lit!

clowntype

dannywhiteley

masterstint

JMCGT

masterstint