Author Topic: Heavy Tools Frame (Read 1792 times)

Stodgy · « **on:** October 17, 2008, 08:09 AM »

Anyone like 'em?

JT71 · « **Reply #1 on:** October 17, 2008, 08:18 AM »

what? like the ruler? they're cool, don't see many though.

bmxbert · « **Reply #2 on:** October 17, 2008, 09:29 AM »

didnt they make a platformed frame to similar to the old standard lengthy. think they were pretty cool to. were heavy tools a run by khe? i remember that they were always alot like the chrome catweasle in build and used to kome with fat bob bars and lamello tyres.

Stodgy · « **Reply #3 on:** October 17, 2008, 09:57 AM »

They did do a platform one too...got one here:

I picked this up VERY cheap if anyone is after one...

bmxbert · « **Reply #4 on:** October 17, 2008, 10:00 AM »

not for me. but tht wouldnt make a bad little project with some fresh powder and the right parts

nomad · « **Reply #5 on:** October 17, 2008, 10:08 AM »

i remember Heavy Tools, I remember someone I rode with having a Ruler, or maybe it was me that had it, I doubt it thou. I actually find it abit hard to remember all the frames I had bitd

motomagII · « **Reply #6 on:** October 17, 2008, 10:15 AM »

i had a ruler frame and forks was nice chrome well made frame but typically 90s as heavy as fook

Stodgy · « **Reply #7 on:** October 17, 2008, 10:24 AM »

The chrome would clean up fine on it TBH, the forks that came with it did...

Anyhoo, it's here if anyone fancies a little build.

Wayne Ryder · « **Reply #8 on:** October 17, 2008, 10:49 AM »

I had a Screamer, very good frame and still going strong with another owner. No complaints whatsoever, other than it not being very lightweight. Only reason I got rid of it was to thin down the herd.

condor96 · « **Reply #9 on:** October 17, 2008, 05:14 PM »

those look pretty cool. look a bit like standards

welsh denny · « **Reply #10 on:** October 17, 2008, 06:01 PM »

one of the original bristol cider riders used to ride for them- ira rainey.

Philbert · « **Reply #11 on:** October 17, 2008, 07:08 PM »

lengthy and sta copies! good as a cheap ride back in the day.

condor96: i have a mint condition copy of maddmatt. i'm trying to get it put onto dvd, i'll let you know!

gary4130 · « **Reply #12 on:** October 17, 2008, 07:38 PM »

Quote from: philbert on October 17, 2008, 07:08 PM

lengthy and sta copies! good as a cheap ride back in the day.

condor96: i have a mint condition copy of maddmatt. i'm trying to get it put onto dvd, i'll let you know!

if you can get a copy could i have one?been trying for ages to get one(lost the original during a house move

-but still have the cover

)
cheers mate

gary4130 · « **Reply #13 on:** October 17, 2008, 07:46 PM »

nice frames-got the same one as stodgy pretty good but at others said heavy-just as the name says

must get round to build it up sometime.

condor96 · « **Reply #14 on:** October 17, 2008, 07:51 PM »

a let a girl i was seeing at the time borrow my copy. i still have no idea why they are so impossible to find. why didnt they ever put that one to dvd like the others?

bmxer4ever · « **Reply #15 on:** October 21, 2008, 10:51 PM »

Quote from: condor96 on October 17, 2008, 07:51 PM

a let a girl i was seeing at the time borrow my copy. i still have no idea why they are so impossible to find. why didnt they ever put that one to dvd like the others?

Hmmmm.....still in the cellophane....

condor96 · « **Reply #16 on:** October 22, 2008, 02:15 AM »

ahh you killing me lol. is that 2 copies you have??

generallee · « **Reply #17 on:** October 22, 2008, 09:40 AM »

Dave, what you have there is the Heavy Tools Screamer frame. Screamers came with a platform, the Ruler did not. However they also did a Heavy Tools complete bike, that had a frame like the Screamer but wasnt full cromo - so ther is always the poss that yours is the cheaper complete bike frame - cant remember what it was called, in fact I think it may not have even had a name - just was the Heavy Tools complete -
good old standard copies!

Stodgy · « **Reply #18 on:** October 22, 2008, 09:43 AM »

Thanks Steve

Right then, who wants it?

Free. Just pay postage.

Get it out of my way.

Please.

gary4130 · « **Reply #19 on:** October 22, 2008, 09:57 PM »

Quote from: bmxer4ever on October 21, 2008, 10:51 PM

Quote from: condor96 on October 17, 2008, 07:51 PM
a let a girl i was seeing at the time borrow my copy. i still have no idea why they are so impossible to find. why didnt they ever put that one to dvd like the others?

Hmmmm.....still in the cellophane....

not fair gary

now thats just been greedy

Wayne Ryder · « **Reply #20 on:** October 22, 2008, 10:15 PM »

Quote from: generallee on October 22, 2008, 09:40 AM

Dave, what you have there is the Heavy Tools Screamer frame. Screamers came with a platform, the Ruler did not. However they also did a Heavy Tools complete bike, that had a frame like the Screamer but wasnt full cromo - so ther is always the poss that yours is the cheaper complete bike frame - cant remember what it was called, in fact I think it may not have even had a name - just was the Heavy Tools complete - good old standard copies!

Looking at the graphic on the seattube, I'd go with Screamer. Think mine had one similar.
I'll pass, enough unused spare frames already.

Stodgy · « **Reply #21 on:** October 23, 2008, 08:54 AM »

No probs. Going down the tip today.

generallee · « **Reply #22 on:** October 23, 2008, 06:42 PM »

dont send it to the tip!!! No frame deserves that! rattle can spray it and stick it on ebay. And if you dont want to buy the paint, spend the dosh on postage and send it to me - i'll do something with it!

Author Topic: Heavy Tools Frame (Read 1792 times)

JT71

bmxbert

bmxbert

nomad

motomagII

condor96

welsh denny

condor96

bmxer4ever

condor96