Author Topic: anyone in bournemouth? s&m holmes oversized (Read 1594 times)

darkersomeday · « **on:** September 24, 2008, 11:55 PM »

for fooks sake,

i've been searching for one of these "1-1/8th holmes frames for years!

theyre always bloody miles away! $:-\$

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=110291155902&fromMakeTrack=true

i'm destined not to get one eh?

Stodgy · « **Reply #1 on:** September 25, 2008, 07:57 AM »

Joe - put this in the Lounge mate...there is bound to be someone down in Bournemouth mate.

darkersomeday · « **Reply #2 on:** September 26, 2008, 05:17 PM »

Quote from: Stodgy on September 25, 2008, 07:57 AM

Joe - put this in the Lounge mate...there is bound to be someone down in Bournemouth mate.

cheers for the help dude,

i won the bike and the guy is going to post it!!!

yes!! well chuffed!!!

at long last i've found my dream frame,
this fooker is going to be a right build!!

no holds barred and hideously expensive,

anyone want any of the parts off it?
peregrine wheel set, primo cranks etc?

Stodgy · « **Reply #3 on:** September 26, 2008, 05:23 PM »

Bargain Joe! Nice one mate...very pleased for you - can't wait to see the final build.

May be interested in the wheelset depending on condition.

kev-s · « **Reply #4 on:** September 26, 2008, 07:45 PM »

congratulations, cheap too!!!!

SaMAlex · « **Reply #5 on:** September 26, 2008, 10:33 PM »

Good on ya Joe. 'bout bloody time!

gary4130 · « **Reply #6 on:** September 27, 2008, 09:42 PM »

joe, let me know what price you want for crank and pedals please.

darkersomeday · « **Reply #7 on:** September 27, 2008, 09:50 PM »

no probs dude, will do, it wont be much considering what the bike went for,

they look in pretty good nick actually,

i'm torn between army green and baby blue for it,

i'd imagined a fine blend of dingo's s&m nw and my standard 125?

or should i go for the original army geen for toughness?

heres the stickers i've got for it *non ng c)ck ht sticker though

baldbmxer · « **Reply #8 on:** September 27, 2008, 09:56 PM »

Joe

If you're cutting the forks loose I may be interested in them, again dependent on price and condition.

Just need a set of cheap 1 1/8'' forks.

JJ

darkersomeday · « **Reply #9 on:** September 27, 2008, 10:03 PM »

Quote from: baldbmxer on September 27, 2008, 09:56 PM

Joe

If you're cutting the forks loose I may be interested in them, again dependent on price and condition.

Just need a set of cheap 1 1/8'' forks.

JJ

yes mate, i've got some nos pitchs for it,
i'll hit you up when it lands

nomad · « **Reply #10 on:** September 29, 2008, 04:25 PM »

interested in the wheels mate

darkersomeday · « **Reply #11 on:** October 01, 2008, 09:12 PM »

well here it is, after 8 years or so of waiting i finally got one,

HXL5642

the chainstay has a few "issues" but nothing drastic,

the only major flaw in my plan is that the seat post tube is for a 22.2mm old school size post, it makes me wonder if the frame is a bit too early for the stickers i'd got for it,
but fook it, i'm going to indulge myself and do it anyway, its not like its a fooking faberge egg or a gen 1 haro so......

thanks to monsignor harris for the enduro, just look at that badboy, shits like a chin jutting out, with the proudc0ck on the headtube it should make for a fook off stance,
pitchforks are here for it too,

needs slam bar specials next

but again, i only have the regular slam stickers, fook it eh??

any idea's for the colour?

harris · « **Reply #12 on:** October 01, 2008, 09:16 PM »

very nice joe thats gonna be a sweet build.

kev-s · « **Reply #13 on:** October 01, 2008, 09:26 PM »

looks good, as for colours the black looks good, im partial to red

also chrome or even yellow would be cool (i really wanna yellow holmes one day)

disciple of dirt · « **Reply #14 on:** October 02, 2008, 05:18 PM »

hi joe ,
currently building a 1 inch holmes and need a seatpost clamp and seat so if they are the same size would definitly be interested in those !
cheers tom

darkersomeday · « **Reply #15 on:** October 04, 2008, 09:24 AM »

Quote from: disciple of dirt on October 02, 2008, 05:18 PM

hi joe ,
currently building a 1 inch holmes and need a seatpost clamp and seat so if they are the same size would definitly be interested in those !
cheers tom

you can have the seatclamp dude, pm me your address,

the seats gone to gingerholmes

bars are still available though

wirewheel · « **Reply #16 on:** October 04, 2008, 02:43 PM »

those stickers are later for a next gen holmes frame which was loads heavier duty

darkersomeday · « **Reply #17 on:** October 05, 2008, 06:47 PM »

yet another pic and this is the basic form, ready now to be stripped and powdered,

s&m holmes oversized
s&m pitchforks -cheers umper
s&m slam special bars (thicker tubing&crossbrace) - cheers dingo
s&m enduro stem - cheers dan,

army olive green $:-\$

SaMAlex · « **Reply #18 on:** October 05, 2008, 07:57 PM »

OK, this is just my thoughts, nothing more.

I dont like the stem. That frame was one of the first over sized S&Ms so why not use a nice sharp edge redneck?
The bars are heavy ones. The frame is a nice lightish race frame (sort of). Id go with normal slams.

However .... I love using those frame decals on the forks. Ive not seen that before, I might do it myself sometime.

Talking of green S&Ms, have you seen they are now doing the new dirtbike in green. Just when you thought it could look no better!

darkersomeday · « **Reply #19 on:** October 05, 2008, 09:05 PM »

its an ugly fooking stem eh? thing has a chin!
i've never had or seen one so thought it would make a change, i do prefer the redneck and will be keeping my eyes peeled for one, gutted i sold the green one

that green dirtbike looks soo sweet