Author Topic: Ive just learnt a lesson. (Read 2525 times)

munners · « **on:** September 12, 2008, 07:24 PM »

I got an 1984 Gt Performer blasted today. The guy said he would powder the bars and frame and forks in white for an extra £20.

I thought fook it. Went back an hour later..................it was the worst job i have ever seen!

Dont know weither to send it back tomorrow and ask him to do it again or just send it straight to the master Dan and swallow the cost.

I dare not post pics. Its embarrassing!

QUADROPHENIA · « **Reply #1 on:** September 12, 2008, 07:26 PM »

best you go and beg at dans door

Gashead · « **Reply #2 on:** September 12, 2008, 07:30 PM »

Pics Nick - come on

DIRTBIKER250F · « **Reply #3 on:** September 12, 2008, 07:34 PM »

Nick i dunno how expensive or how long it takes Dan to knock em out, but i can recommend FHM Reader Mark. Had 3 bikes done of him now, a week turnaround and 60-70 to strip prep and paint with postage. Just a heads up

Paul

superbikedan · « **Reply #4 on:** September 12, 2008, 07:35 PM »

DIRTBIKER250F · « **Reply #5 on:** September 12, 2008, 07:37 PM »

Dan not steppin on your toes dude, just shouting out another old skooler who does a great job to.

munners · « **Reply #6 on:** September 12, 2008, 07:38 PM »

I have NEVER used anyone other than Dan. I have seen him perform before my eyes. Basically he is the DON and he puts so much effort into them to get us the results.

I will take pics then.

superbikedan · « **Reply #7 on:** September 12, 2008, 07:46 PM »

Quote from: DIRTBIKER250F on September 12, 2008, 07:37 PM

Dan not steppin on your toes dude, just shouting out another old skooler who does a great job to.

those sighns where meant for knob ed nick

no worries mate

harris · « **Reply #8 on:** September 12, 2008, 07:47 PM »

i would charge him double dan.

brass monkey! · « **Reply #9 on:** September 12, 2008, 07:49 PM »

Nick, you tight @rse !!

old Mr Mean !!

go and see Dan, you know it makes sense !

Dan - get some pics before you strip it mate

Flatcap · « **Reply #10 on:** September 12, 2008, 07:49 PM »

Fook him Dan....HOW DARE HE TAKE IT TO SOMEONE ELSE!

You should be ashamed of yourself!!

Daz.

harris · « **Reply #11 on:** September 12, 2008, 07:51 PM »

cmon munners get that pic up

WARDY · « **Reply #12 on:** September 12, 2008, 08:15 PM »

deffo double price Dan for re doing some cowboy's work

Whatever possessed ya Nick knowing that Dan does a shite hot job then letting someone do it without knowing how it would turn out

Infact fook it Dan treble the price seeing as Nick seems to have took leave of his senses, mind you think the cracks were appearing when he bought that burner for himself the other week

munners · « **Reply #13 on:** September 12, 2008, 08:21 PM »

He obviously didnt powder the redline stem.
The pics dont really show. The powder is veiny a over and looks like it has dust particals in it. It is nice and flat all over but he has hardly done the drops!
Has pin point holes in all over in areas too.

superbikedan · « **Reply #14 on:** September 12, 2008, 08:23 PM »

i'm quite enjoying watching nick suffer

now cowboys ride a horse and shout " yee haa," they dont

powdercoat bmx bikes

harris · « **Reply #15 on:** September 12, 2008, 08:23 PM »

that paint looks dead is it matt finish or did he paint it with pee water

Flatcap · « **Reply #16 on:** September 12, 2008, 08:24 PM »

Fook me!

I could have done a better job with Hammerite Smooth, thinking about it, normal Hammerite!

Daz.

WARDY · « **Reply #17 on:** September 12, 2008, 08:24 PM »

that's shockingly bad Nick

superbikedan · « **Reply #18 on:** September 12, 2008, 08:29 PM »

click here

http://www.radbmx.co.uk/forum/index.php'topic=69976.0

oldbmxrider · « **Reply #19 on:** September 12, 2008, 08:32 PM »

if you cant see that is from a can you have to get new glasses

munners · « **Reply #20 on:** September 12, 2008, 08:34 PM »

Quote from: oldbmxrider on September 12, 2008, 08:32 PM

if you cant see that is from a can you have to get new glasses

I sa whim get the gun out mate and set it up!

superbikedan · « **Reply #21 on:** September 12, 2008, 08:39 PM »

Quote from: munners on September 12, 2008, 08:34 PM

Quote from: oldbmxrider on September 12, 2008, 08:32 PM
if you cant see that is from a can you have to get new glasses

I sa whim get the gun out mate and set it up!

that is shockingly bad, i think he set you up nick

my fook ups aint as bad as that

thebigdog · « **Reply #22 on:** September 12, 2008, 08:40 PM »

I can service your Porsche for £15

Gary72 · « **Reply #23 on:** September 12, 2008, 08:41 PM »

£20 what did you expect, One of my old man's saying's was "The dearest is the cheapest in the long run"
Swallow your pride and ship it to SBD

munners · « **Reply #24 on:** September 12, 2008, 08:47 PM »

Lads....i think you are missing one thing.

Dan is the man and always has been. It was always gonna go to him. All the bikes i have needed powdered have.

When he said £20 and done in an hour i thought fook it!

It wasnt really the money but the time it takes to post and all that crap. Dan has always been rapid on the turnaround time. Its always been done in 3 days.

Dan has agreed to sort it so once again.....................love you dan.

Anyway its only more good press for Dan as i will post pics of his results.