Author Topic: Stripping powder off chrome? (Read 710 times)

davevilla · « **on:** September 06, 2008, 07:44 AM »

Wondered if any of you have had experience of stripping powder off chrome - I have these Haro bars, I'd like to remove the powder so that they are all chrome. Is this possible with out knackering the chrome underneath? If so what do I use to limit the damage.

Thanks everso

Bigfrawg · « **Reply #1 on:** September 06, 2008, 08:17 AM »

are you sure thats not paint? try some thinners. if it is powder then gasket remover will do the job

davevilla · « **Reply #2 on:** September 06, 2008, 09:31 AM »

Good point - I'd assumed it was powder, but could be paint...I'll have another look at them.

Thanks for the tips

Bigfrawg · « **Reply #3 on:** September 06, 2008, 09:37 AM »

if they are in original finish i am sure it's paint.

Del · « **Reply #4 on:** September 06, 2008, 09:50 AM »

its paint, I had the same bars that I stripped, good old nitromors is your friend here.

davevilla · « **Reply #5 on:** September 06, 2008, 10:30 AM »

Thank you both...looks like I'm getting the rubber gauntlets out

Dave

MartyC · « **Reply #6 on:** September 06, 2008, 10:52 AM »

Pics when done Dave

davevilla · « **Reply #7 on:** September 06, 2008, 09:07 PM »

Quote from: MartyC on September 06, 2008, 10:52 AM

Pics when done Dave

Righto mate - probably going to have a bash at them tomorrow, pictures to follow...

superbikedan · « **Reply #8 on:** September 06, 2008, 09:46 PM »

when i get back to work on monday i'll check out the stripper i use,

nitromors is ok but no guts to it, my gel strip is the don, it will break any paint system,

will let you all know