Author Topic: pre production Ukbikeco Revolution.........now 3.4lb (Read 6626 times)

evamedia · « **Reply #50 on:** August 07, 2008, 08:01 AM »

Quote from: isaac on August 07, 2008, 12:44 AM

all ready managed to crack it were the top tube meets the seat tube

Near that big hole? What a surprise.

dibly · « **Reply #51 on:** August 07, 2008, 09:00 AM »

if you look at the pictures at the beging of the thread you can see the gusset round the seat clamp area this is external and internal this was not on ryans frame....i kinda thought ryans frame would go there but you never know until you test.......just like the head tubes on the wethepeople that flew off the frames.......all part of the testing process mate if you dont push the boundaries things will never develop and he has been on the frame for 4 months and i have to add that frame was totally different internally to the rest the tube daimeters were thinner the butting was less etc etc like i say you never know until you try and if every frame was tested in lab because they were scared of people seeing things go wrong BMX would not be were it is today i knew that was the weakest frame thats why i gave it to Ryan people all over the world have seen the frame and it hasnt stopped distributors all over Europe still wanting them, if they wouldnt buy because a proto frame went wrong i dont think there would even be a market

TwoBobRob · « **Reply #52 on:** August 07, 2008, 09:41 AM »

Damn Dilby!!!!

Take a breath boy!!

dibly · « **Reply #53 on:** August 07, 2008, 09:46 AM »

ha ha i did go on a bit then didnt i

TwoBobRob · « **Reply #54 on:** August 07, 2008, 09:50 AM »

Evamedia has a valid point though. If it was flawed to the eye, then it's a bloody good bet it'll break there, especially if there's some work hardening going on.

dibly · « **Reply #55 on:** August 07, 2008, 09:55 AM »

superstars have the same kind of clamp i just thought i would try something a little smoother to the eye but hey it didnt work but i only made 1 of them no harm in trying

TwoBobRob · « **Reply #56 on:** August 07, 2008, 09:57 AM »

Indeed. So are all the frames currently being ridden all prototypes?

dibly · « **Reply #57 on:** August 07, 2008, 10:03 AM »

no most are the pre production ones they have been on them for a while now the frame that came 13th at the masters was a pre-production had it x-rayed to look for signs of stress etc...all is well

TwoBobRob · « **Reply #58 on:** August 07, 2008, 10:16 AM »

Have you stuck a meathead on one yet and told him to go and fcuk it up?

If not, you should. Destruction testing and all that...

dibly · « **Reply #59 on:** August 07, 2008, 10:18 AM »

all ready on it dude

lazychubs · « **Reply #60 on:** August 07, 2008, 10:48 AM »

Quote from: TwoBobRob on August 07, 2008, 10:16 AM

Have you stuck a meathead on one yet and told him to go and fcuk it up?

If not, you should. Destruction testing and all that...

i hope you dont mean me rob lol

20to26 · « **Reply #61 on:** August 07, 2008, 11:09 AM »

Props to Dibly - it really takes a lot of balls to start your own bikeco when so many others are already in the game. Hitting the forums like this takes courage - when last did any of the bigger co's actually do this kind of thing? After chatting at MK I've got heaps of respect for this guy and I hope that he finds success with this venture. Keep it niche and keep making stuff you like Darren. Those frames are sweet - I love the little treats in the details. The bars are the lightest I've ever felt and have a great feel to them too. I'd get my boys on 'em if they were just a little older!

Unknown - not for long I reckon.

moley · « **Reply #62 on:** August 07, 2008, 02:52 PM »

Quote from: 20to26 on August 07, 2008, 11:09 AM

Dwaine!

I think you have the wrong Dibly!!!

We met Dibly at the Creation Novice Night when he brought some frames to get tested by riders!!

Thats the whole point about testing.

To see if it holds up or not and whether your need to make improvements

You can't blame a prototype for failing. Especially when you trying something new or out of the norm!!!

Only an an

would produce 500 frames from the initial design.

Ford dont do it and neither do any other company.

Design, Test, Redesign, Re-Test, Happy, Product in shops, Job Done!!

Considering some companies spend years testing new products. Dibly's done a great job in such a small time frame.

Well done!

Keep it up Dibly!!

THIRSTYKIRSTY · « **Reply #63 on:** August 07, 2008, 04:04 PM »

dem frames is light as me in dreem world,,a feather

must admit i fancy the 24 inch 1 aswell

now gimme 1 dib dobs ,,,,,NOW

R

dibly · « **Reply #64 on:** August 07, 2008, 04:11 PM »

Russ

Gary72 · « **Reply #65 on:** August 07, 2008, 04:29 PM »

Let him have one, 1st dib dobs Russ after you have raced it once

THIRSTYKIRSTY · « **Reply #66 on:** August 07, 2008, 04:38 PM »

NO WAY MAN

IF I GET 1 ITS STAAYS PUTT WITH ME

STILL GOT THE ANGEL AND SHE STILL ROCKS THE TRACK

R

magna13 · « **Reply #67 on:** August 07, 2008, 06:40 PM »

i did see this at mk on show and the frame did look very tempting to buy, i liked it alot

PaulM · « **Reply #68 on:** August 07, 2008, 06:56 PM »

Looking good Darren, love the new shape dropouts too

Cheers

Paul

Stodgy · « **Reply #69 on:** August 11, 2008, 01:24 PM »

Again guys, these frames are on pre-order in the RADBMX BIKE SHOP - let me know if you want one, or the bars and forks.

Postage is free, together with other goodies!

Only 3 weeks now and they should be in stock.

Gary72 · « **Reply #70 on:** August 11, 2008, 07:48 PM »

Any news on colours yet?

BigassBMX · « **Reply #71 on:** August 19, 2008, 06:59 PM »

i thik that uk bike co.

is a amzing up and coming brand that needs 2 stay around they are a comany that is openinga diffrent stage to bmx.

they feel amazing to ride i have had a go on a few of hese and they are the bollox.

uk bike coz here to stay i hope.

harris · « **Reply #72 on:** August 19, 2008, 07:01 PM »

yep darren has my full support when needed gonna be a long road but will shine bright in they end.

etriedes · « **Reply #73 on:** August 19, 2008, 07:41 PM »

Love the frame, checked them out at MK and i'm very tempted

Zippy · « **Reply #74 on:** August 19, 2008, 11:35 PM »

I think I was the only Team Coyote/Tioga rider to never get a bike.

Frame does look the dogs though mate. You've certainly done good.

Author Topic: pre production Ukbikeco Revolution.........now 3.4lb (Read 6626 times)

evamedia

dibly

dibly

dibly

dibly

dibly

moley

THIRSTYKIRSTY

dibly

THIRSTYKIRSTY

magna13

PaulM

BigassBMX

etriedes