pre production Ukbikeco Revolution.........now 3.4lb

[dibly]

here are a few shots of my pre production frame this will be what the finshed ones look like but the welds will be polished smooth, i have changed the drop outs loads  (peg friendly) a gusset round the seat clamp area (and internal) the brake tabs are removable but also flush, and different cable mounts (mtb ones infact) and a bit of shaping around the bottom bracket.

[img width= height=]http://usera.imagecave.com/dibly/IMG_0034-copy.jpg[/img]

[img width= height=]http://usera.imagecave.com/dibly/IMG_0036-copy.jpg[/img]

[img width= height=]http://usera.imagecave.com/dibly/IMG_0037-copy.jpg[/img]

[img width= height=]http://usera.imagecave.com/dibly/IMG_0039-copy.jpg[/img]

[img width= height=]http://usera.imagecave.com/dibly/IMG_0040-copy.jpg[/img]

[img width= height=]http://usera.imagecave.com/dibly/IMG_0044-copy.jpg[/img]

[img width= height=]http://usera.imagecave.com/dibly/IMG_0045-copy.jpg[/img]

[username]

My initial reaction is that it looks like shit, but in the spirit of keeping an open mind, how is it that you can make a frame more than a pound lighter than Fly, Fit, Sunday etc without massively sacrificing strength?

I am not asking for industry secrets to be revealed but there must be a way to explain it in layman's terms.

[dibly]

by being clever ha ha i cant say man but they come with life time warranty and if mark webb cant break them then im sure that all i have to say dude....thanks man

[bof]

Username I have heard rumours the tubes are full of helium, one of the brake lugs is actually a schrader valve and can be topped up at your local balloon shop . If you need to know anymore lightweight secrets PM dark diggler he knows everything 

[Matt428]

Looks OK and could be awesome if it actually is still as strong as the other frames on the market.  The only issue I can see is that the stickers haven't been cut particularly well and so, as you can see on the close ups, areas which are just clear plastic bubble and look unslightly.  Easily resolved and just makes the frame look that little bit better IMO

[billstup]

I think they`re really nice, and a British Company too 

[dibly]

its a sample dude so the stickers have been printed by me and put on by my own fair hands ha ha and i admit im not the best at it but the sticker material is not what is used for actual bikes sticker etc etc.........strength......LIFETIME............Mark webb.....

[dibly]

I think they`re really nice, and a British Company too 

Thanks bill! 

[PHIPPSIO]

i liked the look of these and the uk manufacturing is very appealing. We spoke, i'll be in toucjh to see if you can spare me a few for my new venture from the first run 

[dibly]

thank you! my first container is spoke for as i now sell to most of the EU but im sure when it comes to the crunch there will be some left over 

[beard1973]

Top Stuff... from a Top Fella....

[dibly]

Thanks beard! boy have i put weight on recently spending to much time behind my mac now im doing this 

[SaMAlex]

i liked the look of these and the uk manufacturing is very appealing.

Are the frames made in the UK?

[dibly]

nah dude

[SaMAlex]

I didnt think they would be, no probs. 

[ron burgundy]

Good luck Dibly

[harris]

had a good look at these pups at mk and im impressed
the results that have started happening and been ridden by some
of the countries finest riders is gobsmacking,we all have our own ideas
and opinions but you have put them out had them ridden and they work .
cant say more than that rock on dibly respect where its due.

Dan

[zed4130]

I think it looks great, keep up the good work mate   

[Dark Diggler]

You have had my vote from the early days dude

Those forks are fooking ace, the detail is awesome. I will buy some of those so that you can afford some new jeans 

well done pal

[pickle]

i think they look the dogs!  really hope these take off for ya Dibly as it couldn't happen to a nicer bloke!   

[moley]

Well done Dibly!

I hope it becomes a huge success.

That way you can hire some goons to do all the day to day mundune work and you can get back on ya bike and do some OS Racing!!! 

As for strength of the frames etc, etc.   Whether your the biggest or the smallest company you always have to test your product.

Dibly has done that and is addressing any concerns that showed up when the product was first being tested when the prototypes were made.

The Lifetime warranty speaks for itself.

In such a small space of time, you've done a great job.   Keep it up!! 

[christhejob]

i take it you got Webby on one then?  the new face of unknown? 

[Stodgy]

Great to see you at MK Darren - you're a top fella with enough balls to get out there and make it happen where others just talk. Big respect dude.

Can't wait to see the production 'Evolution' frame, a more traditional higher top tube will probably be more up the radbmx markets street.

Fine products - I can't wait to get mine buddy.

Take care and stay rad.

[OrgasmDonor]

like i said dibly dude, i think they look awesome and wish you all the very best with them

[dibly]

Thank you guys!