gfxgfx
 
logo
 
gfx gfx
gfx
975825 Posts in 138946 Topics by 6376 Members - Latest Member: The Carrot Cruncher December 30, 2024, 08:17 PM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Frame/forks ID please
gfx
gfxgfx
 

Author Topic: Frame/forks ID please  (Read 1602 times)

0 Members and 1 Guest are viewing this topic.

gmac

  • Guest
Frame/forks ID please
« on: January 12, 2006, 11:32 AM »
Obviously it's a Mongoose, but not sure what model it is. I'm thinking Californian ? ?  Looked too clean to pass up whatever it is.














Cheers


Guy  :daumenhoch:

Offline Nosnod

  • Rockwalk
  • ***
  • Posts: 580
  • Rated:
Re: Frame/forks ID please
« Reply #1 on: January 12, 2006, 12:00 PM »
Pretty certain that is a californian Guy but I just compared it to my 83 Expert that I had which supposedly shared the same trimoly frame and whilst everything else is identical if you look closely where the rear upper brake stay tubes meet the seat tube, yours seem to come in pretty central with the top tube whilst mine appear to be slightly higher??! What is the serial no.?


gmac

  • Guest
Re: Frame/forks ID please
« Reply #2 on: January 12, 2006, 12:07 PM »
Cheers bud, I thought the same thing about the rear stays. I don't know the serial number, as I haven't received the f/f yet.


 :daumenhoch:

Offline ORB

  • Founding Fathers
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • Rated:
Re: Frame/forks ID please
« Reply #3 on: January 12, 2006, 12:21 PM »
Hmmm, i had a Cali with oddball stays.

Twas an 83 too.

Would a picture suit sir?
12

gmac

  • Guest
Re: Frame/forks ID please
« Reply #4 on: January 12, 2006, 12:28 PM »
please  :)

Offline ORB

  • Founding Fathers
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • Rated:
Re: Frame/forks ID please
« Reply #5 on: January 12, 2006, 12:29 PM »
12

gmac

  • Guest
Re: Frame/forks ID please
« Reply #6 on: January 12, 2006, 12:53 PM »
Cheers for that ORB, that does look the same as Nosnod's Expert.  So it could still be either a Cali or an Spurt then ?  ???

Offline Nosnod

  • Rockwalk
  • ***
  • Posts: 580
  • Rated:
Re: Frame/forks ID please
« Reply #7 on: January 12, 2006, 01:19 PM »
Guy,
You might have struck lucky there mate... It could well be a Supergoose

Compare it with this... 

http://cgi.ebay.co.uk/BMX-bicycle-Supergoose-III-Mongoose-Original-82_W0QQitemZ6596178834QQcategoryZ35960QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Now it means that you are going to have to buy more top end bits ;D

theRuler

  • Guest
Re: Frame/forks ID please
« Reply #8 on: January 12, 2006, 01:24 PM »
its an 82-84 cali

gmac

  • Guest
Re: Frame/forks ID please
« Reply #9 on: January 12, 2006, 01:26 PM »
its an 82-84 cali

Is that for deffo ? What's the giveaway ?

I'm quite happy if it is a Cali, cos that's what I thought it was, and it was pretty cheap. Like Nos says, it'll be alot cheaper to build up too  ;)

theRuler

  • Guest
Re: Frame/forks ID please
« Reply #10 on: January 12, 2006, 01:28 PM »
it just looks like a pre 85 cali

weigh it, on the kitchen scales

when i get home i will weigh my cali frame. that should confirm it!

Offline ORB

  • Founding Fathers
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • Rated:
Re: Frame/forks ID please
« Reply #11 on: January 12, 2006, 01:30 PM »
I think we need mr kdw.
12

theRuler

  • Guest
Re: Frame/forks ID please
« Reply #12 on: January 12, 2006, 01:35 PM »
actually
my cali has a hole through the chainstay box section
for fitting a stand i think

yours doesnt

might be better than a cali

maybe a super like previously suggested

Offline stidds

  • Site Supporter
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • Rated:
Re: Frame/forks ID please
« Reply #13 on: January 12, 2006, 01:39 PM »
Could be a Cali, definately not a Supergoose though.  The reason being that it has a flat brake bridge with no holes in it, the Supergoose had 2 holes either side of the hole on the brake bridge.

Here is a picture of the rear end of my Cali and you can just see the solid brake bridge.


theRuler

  • Guest
Re: Frame/forks ID please
« Reply #14 on: January 12, 2006, 01:40 PM »
maybe the later ones had the stand hole
mine is an 85, with the riveted headtube plate

Offline ORB

  • Founding Fathers
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • Rated:
Re: Frame/forks ID please
« Reply #15 on: January 12, 2006, 01:49 PM »
My 83 Cali had no stand hole behind the BB



I thought the Spurts had the stand holes?
12

theRuler

  • Guest
Re: Frame/forks ID please
« Reply #16 on: January 12, 2006, 01:52 PM »
perhaps they did
i bought mine as an 85 cali
there is a very VERY weathered cali sticker on the seattube. looks authentic

anyone got a riveted headtube logo cali in their arsenal to check this?

Offline Nosnod

  • Rockwalk
  • ***
  • Posts: 580
  • Rated:
Re: Frame/forks ID please
« Reply #17 on: January 12, 2006, 03:29 PM »
Pretty sure my Expert didn't have a stand hole but will check tonight as I have pics on my home pc

Flake

  • Guest
Re: Frame/forks ID please
« Reply #18 on: January 13, 2006, 07:34 AM »
Is there any way of telling which frame model  and year you have from the serial number. Its just that I have a supposed cali without the seat tube sticker so in theory could be any model.  :-\

Does anybody have a cali seat tube sticket please :)

theRuler

  • Guest
Re: Frame/forks ID please
« Reply #19 on: January 13, 2006, 09:22 AM »
Pretty sure my Expert didn't have a stand hole but will check tonight as I have pics on my home pc

looked on mine last night and it looks like the previous owner has drilled the stand hole himself
nice mod.

RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Frame/forks ID please
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal