Author Topic: Lever clamp won't close on bend (Read 619 times)

firebird4130 · « **on:** July 16, 2008, 10:27 PM »

I can't get a lever on the bend of my bars tried bending the clamp and bust it, what lever can I use? The tubing also widens at the bend. Any suggestions?
Cheers

fraz

SaMAlex · « **Reply #1 on:** July 16, 2008, 10:30 PM »

Only some levers can be used on the bend. I forget what ones, but they use it as a selling point so it should be easy to find them

thecrooch · « **Reply #2 on:** July 16, 2008, 10:32 PM »

think the dia tech dirty harry ones are ok for that...

firebird4130 · « **Reply #3 on:** July 17, 2008, 01:33 PM »

cool, will look into that,

Cheers,

fraz

pickle · « **Reply #4 on:** July 17, 2008, 01:43 PM »

i have a pair in new condition for £15 if you want em? white clamps and black lever blades

firebird4130 · « **Reply #5 on:** July 17, 2008, 06:34 PM »

I only need a right, will take 1 if you'd sell individually, if not it's cool,
Cheers,

Fraz

pickle · « **Reply #6 on:** July 20, 2008, 08:49 AM »

sorry mate, really don't want to get stuck with a single lever

firebird4130 · « **Reply #7 on:** July 20, 2008, 11:23 AM »

no worries, still not sure that lever is what I need, what I want is something where the clamp can be made any size without it stopping the bolt from lining up with the thread? The tubing is quite wide at the point where I need the lever to go

priv · « **Reply #8 on:** July 20, 2008, 11:39 AM »

i used a dirty harry{minus the spacers} on a pair of mid skool bars and they're wider than new skool

priv

pickle · « **Reply #9 on:** July 21, 2008, 06:46 PM »

what about Tech 77?

firebird4130 · « **Reply #10 on:** July 21, 2008, 07:04 PM »

I already busted a 77 lever trying to hammer the clamp bit so it was wider, stupid idea anyway coz the bolt wouldn't line up after. I think I'll try a lever for oversized bars and wedge something in the gap

pickle · « **Reply #11 on:** July 21, 2008, 07:04 PM »

Dirty Harry is what ya need mate

Author Topic: Lever clamp won't close on bend (Read 619 times)

firebird4130

Lever clamp won't close on bend

SaMAlex

Re: Lever clamp won't close on bend

thecrooch

Re: Lever clamp won't close on bend

firebird4130

Re: Lever clamp won't close on bend

pickle

Re: Lever clamp won't close on bend

firebird4130

Re: Lever clamp won't close on bend

pickle

Re: Lever clamp won't close on bend

firebird4130

Re: Lever clamp won't close on bend

priv

Re: Lever clamp won't close on bend

pickle

Re: Lever clamp won't close on bend

firebird4130

Re: Lever clamp won't close on bend

pickle

Re: Lever clamp won't close on bend