Holeshot RF1

[harris]

totally agree just ashame its on such a rare frame set

[SaMAlex]

I was going to ask if the stem was stuck in at that height, but it was lower before???

Have you got the same problem with cutting outer cables as Billstup? Tether that bad boy down! It looks like Indi's whip

[adam01]

its magnificent

Adam

PS: rare bmx

[WARDY]

No one - except for the spoilt little b stards -had any dough bitd , so the way you ve done that is 10/10 for me  all this bs about you ve gotta have profiles etc is shite , since i ve joined here ive seen freestylers from bitd riding with opc on and suntour stems , the vdc freestyer had a opc on as standard, but now its gotta be bling bling , to me thats how a kid bitd would have had it, tops 

[JT71]

when i were a kid no fokker had three piece cranks and mx1000's.

 

I put one piece on all my builds.

[WARDY]

and remember that f/f was nt that special then , so it did nt stand out ,it only stands out now because its so rare and you lot are expecting to see top parts on it, well i think he s done it just perfect

[Jt]

well, i'm usually quite diplomatic about stuff as you all know, but i dont see what all the fuss is about..

tis rare, but that doesnt stop it from being shite

just my two penneth

[virtualmeuk]

Apart from bars, tyres and grips thats what he had BITD so i think its spot on and it probably remonds him of why he bought it. At the end of the day its all about old school for me and that is old school down to a tee.

Top job mate

[brass monkey!]

 

[magna13]

 

[Lazarou]

Should sell it to Madall then everybody wins!!!!

Brent gets loads of money.

Madall gets the bike he wants.

The frame will get loads of nice bits attached to it.

Mrs Madall will then pose with the bike which we would all enjoy.

No losers!

[magna13]

Should sell it to Madall then everybody wins!!!!

Brent gets loads of money.

Madall gets the bike he wants.

The frame will get loads of nice bits attached to it.

Mrs Madall will then pose with the bike which we would all enjoy.

No losers!

[WARDY]

that bike should nt have loads of nice parts attached to it.          example


first piccy - looks average, as it come






second piccy - fooking stunning and won botm, why, money and time went into it , when a youth u did nt say hold on theres something that dont go with the way i want my bike to look, ill be with u later chaps

[harris]

agreed wardy but i was a sponsored rider btd and had all the nice bits back then including 401s mxs and tuffs  .
and also wanted an rf1 but they never had one ready so had to get something else  so my memories are tied alot
on the rf1  thats all   

[WARDY]

by the way , id like to see one of these done seeing as were on about rare old bmx s

[magna13]

by the way , id like to see one of these done seeing as were on about rare old bmx s

[brass monkey!]

by the way , id like to see one of these done seeing as were on about rare old bmx s

have you seen Flanelcamel's VDC's young man ??

[WARDY]

agreed wardy but i was a sponsored rider btd and had all the nice bits back then including 401s mxs and tuffs  .
and also wanted an rf1 but they never had one ready so had to get something else  so my memories are tied alot
on the rf1  thats all   

agreed too , but a lot of kids were nt ,so they aspired to the piccys, which was not all about the best bits, anyhows can i buy your freestyler you old bstard

[harris]

 

[WARDY]

by the way , id like to see one of these done seeing as were on about rare old bmx s

have you seen Flanelcamel's VDC's young man ??

Matt , i aint seen or heard off flanel camel since i bought them profiles off him

[WARDY]

 you may laugh ,but i want it to go with me changa , you must have loads of rare bikes , give me a chance.  Ill trade it for one wicked zimmer frame , nos 

[PHIPPSIO]

OK, The lads dug this out of his garage after a good many years, I for one think its his perogative what he does with it and frankly, i think it looks ok. He's not been influenced by this site, he's just built the bike as he likes it and thats a right result in my book as we are all a lot wiser for being obsessed with BMX arent we 

I like it and i can see why brent does too. its not bogged down with opinions and fooking Neil Ruffels epilogue (gasp), its a lad and his fooking bike, where we all started, including Neil........enjoy Brent and welcome to the site, up to you if you want to hang around though mate



 

[Flatcap]

OK, The lads dug this out of his garage after a good many years, I for one think its his perogative what he does with it and frankly, i think it looks ok. He's not been influenced by this site, he's just built the bike as he likes it and thats a right result in my book as we are all a lot wiser for being obsessed with BMX arent we 

I like it and i can see why brent does too. its not bogged down with opinions and fooking Neil Ruffels epilogue (gasp), its a lad and his fooking bike, where we all started, including Neil........enjoy Brent and welcome to the site, up to you if you want to hang around though mate



 

 

[retrorider.u.k]

the fact is it looks a piece of shite as it is.

[WARDY]

No one - except for the spoilt little b stards -had any dough bitd , so the way you ve done that is 10/10 for me  all this bs about you ve gotta have profiles etc is shite , since i ve joined here ive seen freestylers from bitd riding with opc on and suntour stems , the vdc freestyer had a opc on as standard, but now its gotta be bling bling , to me thats how a kid bitd would have had it, tops 

ill quote meself on this one