Author Topic: Any one seen one of these before ? NEW PIC'S 52 ! go study lol (Read 1328 times)

BENDYCAT ELEVENTEEN · « **on:** June 01, 2008, 12:17 AM »

Need a little help from you guy's - got a frame that needs an I.D - says mongoose on it but ? can any one say what/which it is ?

has a tuff II neck and a dia compe mx 1000 on it

can any one tell me a year on which the dyno frame standers are from please

came with a couple of bits that i picked up

cheers B

Bananaman · « **Reply #1 on:** June 01, 2008, 12:46 AM »

Is it a decade?

Not too hot on geese, better folk on here than me

I'll have the stem of ya though

Oh and some them thunderbolt cables

MartyC · « **Reply #2 on:** June 01, 2008, 05:02 AM »

Looks like an early Supergoose that's had a platform welded on - doesn't look like a factory built one $:-\$ , get some close up pics of the welding on the platform and we should be able to tell

PHIPPSIO · « **Reply #3 on:** June 01, 2008, 09:20 AM »

87 Mongoose decade

Bigfrawg · « **Reply #4 on:** June 01, 2008, 09:23 AM »

have you just ram raided an old bike shop?

snav69 · « **Reply #5 on:** June 01, 2008, 09:32 AM »

Quote from: MartyC on June 01, 2008, 05:02 AM

Looks like an early Supergoose that's had a platform welded on - doesn't look like a factory built one $:-\$ , get some close up pics of the welding on the platform and we should be able to tell

Thats exactly what i was thinking too , the decade looks nothing like that , the ones i have seen anyway $:-\$ .
I would defo say a home made supergoose freestyle

Looks like they did a good job too

bodamus · « **Reply #6 on:** June 01, 2008, 09:38 AM »

Can't help you on the Mongoose I'm affraid sorry.

But have you got any Orange Brakecables amongst that lot? I need a front and rear.

Cheers bodamus

bof · « **Reply #7 on:** June 01, 2008, 09:43 AM »

I would say a mk2 mongoose with bits welded on

I might be interested in the frame if you are thinking of flogging it

djgivvinup · « **Reply #8 on:** June 01, 2008, 09:47 AM »

Definetly not a decade, they didn't have a gusset, had different forks & bars to yours, plus loads of other differences.

It looks like others have said, an early goose that has had extra bits welded on? but didn't the supergoose have three holes in the rear brake bridge?

Or it could just be a mongoose copy, one of the reasons i say that is because of the chainring, didn't the early goose's come with a sugino or mongoose stamped snowflake chainring? obviously it could just have been changed at some point.

Swivel · « **Reply #9 on:** June 01, 2008, 09:51 AM »

Lovely stuff there mate...

Deffo interested in the Green Dyno fork standers and the Haro Thunderbolt brake cables ...

Let me know.

Matt

magna13 · « **Reply #10 on:** June 01, 2008, 09:58 AM »

its defo a supergoose about 82/83 you can tell from the dropouts. www.vintagemongoose.com

aerostylie · « **Reply #11 on:** June 01, 2008, 12:04 PM »

Fook me look at all that stuff

Fork standers yummy

jackel · « **Reply #12 on:** June 01, 2008, 12:43 PM »

looks nice i,d be interested in the bars if your breaking her up

BENDYCAT ELEVENTEEN · « **Reply #13 on:** June 01, 2008, 02:21 PM »

Rear drop out different length's ? factory spec/mistake ? - bolt on the mx 1000 has a wing nut ? - serial no ? - welds look well done and lined up either side? (camera not in middle when taken as i could not get it in there) is it a hutch donut ? whats the crank ?

sorry for all the pics but i thought i might as well put all, as then you can have a good look at all around bike

so goose or not ? if goose which one/year - test factory one ? any ideas welcome !

cheers B

cheers all B

Bob_Acid · « **Reply #14 on:** June 01, 2008, 03:00 PM »

It's an 83 Mongoose 2 (late one). The frame standers are an aftermarket add on.

adam01 · « **Reply #15 on:** June 01, 2008, 03:18 PM »

hey this is an easy investigation

back in the days there were bike parks for parents to take there young children IE: like a family day out but in the local council parks which kids had to line up and wait for there turn to get a free bike for halfhour to ride a round . The park was laid out with traffic lights and you had to stop when lights were such colour this was to help for children to understand the safety of the roads which can be very dangerous. so yes its a free rental bike made up specially for these parks. hope this helps

Adam

PS: there were probably 50 of these bikes made up for each assigned location

kdw712 · « **Reply #16 on:** June 01, 2008, 04:28 PM »

pretty unique find there

2unfit2ride · « **Reply #17 on:** June 01, 2008, 06:05 PM »

Pic overload

jackel · « **Reply #18 on:** June 01, 2008, 06:11 PM »

think that would make a great project

dj B silverlite · « **Reply #19 on:** June 01, 2008, 06:52 PM »

Quote from: 2unfit2ride on June 01, 2008, 06:05 PM

Pic overload

I dont get it

. The more pics the better in my eyes. Help to identify it better

fouronethreeoh! · « **Reply #20 on:** June 01, 2008, 07:24 PM »

Defo an 83 goose.

Platform added by a very good welder, by the looks of the uniform tig welds.
By comparing them to the welds of the headtube gusset you can see the difference.

Build it up for a unique o/s rider, and enter bike of the year

p.s. quality Hutch donut seatclamp by the way (bit corroded though)

BENDYCAT ELEVENTEEN · « **Reply #21 on:** June 01, 2008, 08:39 PM »

Quote from: adam01 on June 01, 2008, 03:18 PM

hey this is an easy investigation

back in the days there were bike parks for parents to take there young children IE: like a family day out but in the local council parks which kids had to line up and wait for there turn to get a free bike for halfhour to ride a round . The park was laid out with traffic lights and you had to stop when lights were such colour this was to help for children to understand the safety of the roads which can be very dangerous. so yes its a free rental bike made up specially for these parks. hope this helps

Adam

PS: there were probably 50 of these bikes made up for each assigned location

is there any info or pictures to back this up please ! cheers B

WizardWeb · « **Reply #22 on:** June 01, 2008, 10:30 PM »

Some of those welds don't look too shabby for an aftermarket job though....

Wouldn't it be great if it was an undiscovered prototype? But I think the frame is too early for that kind of thing. Californians looked different around the time the trickstar came out.