Author Topic: 10mm wheels into 14mm dropouts? (Read 1160 times)

scary_leary · « **on:** January 03, 2006, 06:42 PM »

Whats the easiest way to put 10mm wheels into 14mm drops....please?

Sanmarcopizza · « **Reply #1 on:** January 03, 2006, 06:48 PM »

The easiest way is to buy some top hat washers. About a fiver a pair. If you need to run pegs then you need some Primo Andy's nuts (£12 pair) in the long length, or you can use regular length to just convert from 10 to 14mm.

scary_leary · « **Reply #2 on:** January 03, 2006, 06:59 PM »

Cheers San

see ya at bones :santa_afro:

Dingobmxer · « **Reply #3 on:** January 04, 2006, 07:29 AM »

or buy some of those chaintensioners that have two holes,Odyssey Pact they are called

DINGO

HEYWOOD BMX · « **Reply #4 on:** January 04, 2006, 11:44 AM »

Most pegs are designed for 14mm axles,but come with a 10mm adaptor inside each peg.These work fine as a converter for 10mm to 14mm.

Rombloke · « **Reply #5 on:** January 04, 2006, 04:01 PM »

but then youll need converters for the pegs.....lol

i'll get my coat!!!

Dave

Sanmarcopizza · « **Reply #6 on:** January 04, 2006, 04:10 PM »

Daves laughing but it's the truth. I had the same problem on my red Kappa. Front & Back 14mm drop outs, front & back 10mm axles. Initially I was gonna use a set of pegs I had, one 10mm & one 14mm and no adapters. When I was looking before Chrimble no one had long Promo Andys nuts, so I got some short ones. The thought then hit me that they wouldn''t be long enough to pass through both the peg & dropout. I then found some Hoffman pegs that were light and thin and found that the short Andy's nut does actually do the job.

I you aint running pegs, you don't have such problems.