Author Topic: opinions please (Read 3745 times)

josh_spratty · « **on:** May 05, 2008, 06:25 PM »

over the last year ive been buildin this haro on 15 pound a week because im only thirteen. it is a haro dave mirra and the frame cost me 25 quid of ebay. i have done everythig on my own using onli my dads tools
it has on it :

haro seat and seatpost
quando hubs
alex y303 rims
colony dave guettler forks
fly 3 amigos bars
haro stem
salt tubular cranks
a cheap chainring
wellgo pedals
oddessey freewheel
db buddy pegs
dia compe hombre rear brake
and a tektro front brake

together it has cost me 245quid and a lot more patience

opinions and any improvements please

josh_spratty · « **Reply #1 on:** May 05, 2008, 06:27 PM »

Quote from: josh_spratty on May 05, 2008, 06:25 PM

over the last year ive been buildin this haro on 15 pound a week because im only thirteen. it is a haro dave mirra and the frame cost me 25 quid of ebay. i have done everythig on my own using onli my dads tools
it has on it :

haro seat and seatpost
quando hubs
alex y303 rims
colony dave guettler forks
fly 3 amigos bars
haro stem
salt tubular cranks
a cheap chainring
wellgo pedals
oddessey freewheel
db buddy pegs
dia compe hombre rear brake
and a tektro front brake

together it has cost me 245quid and a lot more patience

opinions and any improvements please

o yes
and grey primo tires

rarman1 · « **Reply #2 on:** May 05, 2008, 09:10 PM »

well done Josh,

get some grips and cables and get riding sunshine

josh_spratty · « **Reply #3 on:** May 05, 2008, 09:11 PM »

Quote from: rarman1 on May 05, 2008, 09:10 PM

well done Josh,

get some grips and cables and get riding sunshine

will do thanks for all the help

oberonspacefruit · « **Reply #4 on:** May 05, 2008, 09:13 PM »

i bet youve learned a lot.

well done on the achievement and commitment.

subversion · « **Reply #5 on:** May 06, 2008, 02:35 PM »

Josh good work so far mate but those pegs are nasty, PM your address & I'll bung you a pair of T1's (used) in the post dude

RATTY · « **Reply #6 on:** May 06, 2008, 04:02 PM »

Nice one Josh, you will love that bike far more than any other, just because you built it. Make sure you keep it safe

sonic-1 · « **Reply #7 on:** May 06, 2008, 04:16 PM »

pm me yer address iv a nice set of grips il send yer oddi gary youngs in black slightly used !!!!! about 20 min

well done keep at it

BrianP · « **Reply #8 on:** May 06, 2008, 08:33 PM »

Nice one Josh, well done Bud,

You seem short of a pedal???

PM me ur addy and I'll send you a new pair of black virtually unused Wellgo Platform type things.

Brian

zed4130 · « **Reply #9 on:** May 06, 2008, 08:35 PM »

cool josh, if you want some new dk flattie style pedals, pm me your address, ill send them to ya

josh_spratty · « **Reply #10 on:** May 06, 2008, 09:04 PM »

thanks for all the messages the reason for the 1 pedal is i cross threded my crank arm

just 3 days after i got them ill get that sorted and get my other pedal on thanks for the grips,pedals and pegs. i have wellgo pedals but they are for a mountain bike but theyre sharp and ive ruined the thread on my other one

josh_spratty · « **Reply #11 on:** May 06, 2008, 09:07 PM »

Quote from: josh_spratty on May 06, 2008, 09:04 PM

thanks for all the messages the reason for the 1 pedal is i cross threded my crank arm just 3 days after i got them ill get that sorted and get my other pedal on thanks for the grips,pedals and pegs. i have wellgo pedals but they are for a mountain bike but theyre sharp and ive ruined the thread on my other one

so i cant put the other one on

josh_spratty · « **Reply #12 on:** May 06, 2008, 09:10 PM »

does anyone have any ideas on value'thanks
josh

Stace · « **Reply #13 on:** May 06, 2008, 11:18 PM »

Josh, Great Effort!!

I used to play and spray my bikes when I was 12 but they never looked as good as yours does!!

I'm sure if Del see's this thread, he'll do you some fancy decals

WELL DONE MATE

Gary72 · « **Reply #14 on:** May 06, 2008, 11:34 PM »

Well done, get it finished and get riding, heard you have had problems with pedals, just to let you know one side is a left hand thread and so tightens up the opposite way

EL CID · « **Reply #15 on:** May 07, 2008, 04:24 AM »

cool to see the kids building like we did!!! keep it up and ride it into the ground and build it again.

josh_spratty · « **Reply #16 on:** May 07, 2008, 07:20 AM »

dont worry ill ride it enough ive already rid my ruption to destruction hopefully i wont take it that far

thanks for all the posts

pickle · « **Reply #17 on:** May 07, 2008, 08:23 AM »

i can't see pictures at work due to stupid surfcontrol but superb work on building up your own ride! i think we all used to be able to strip our bikes and pretty much fix anything on them by 14 BITD.......Very refreshing to see a young'n doing the same thing!

i'm sure your new Haro will last a whole lot longer than your old Ruption

Top work fella!!!

Mattdub · « **Reply #18 on:** May 07, 2008, 08:36 AM »

Good work Josh , good luck with the build

se bikes · « **Reply #19 on:** May 07, 2008, 08:42 AM »

Well Done Josh

It's cool to see a kid of your age as committed as you obviously are

Looks reet nice btw

JT Smooth · « **Reply #20 on:** May 07, 2008, 10:17 AM »

Good work young man

josh_spratty · « **Reply #21 on:** May 07, 2008, 07:28 PM »

thanks everyone

maybe an oldskool bike next to annoy my dad some more

josh_spratty · « **Reply #22 on:** May 07, 2008, 08:03 PM »

is there a powder coater on here? thinking of spraying it bright orange

pickle · « **Reply #23 on:** May 07, 2008, 09:33 PM »

i wouldn't worry about that Josh......ride it into the ground and use your money to replace the broken bits.....colour's fine the way it is in my oppinion

josh_spratty · « **Reply #24 on:** May 08, 2008, 05:56 PM »

ok thanks for the advise

Author Topic: opinions please (Read 3745 times)

rarman1

subversion

sonic-1

zed4130

EL CID

se bikes