Author Topic: Haro f+f unknown......NEW PICS-ALL COMPLETE! (Read 12231 times)

macky · « **Reply #25 on:** May 12, 2008, 08:48 PM »

hahaha!! ohh my God!!

that is the best condition Grifter ive ever seen!!!!

Still got the spongy padding on the bars!! i loved those bikes!!

the top one looks very much like a Raleigh Burner!!!

shorty50y · « **Reply #26 on:** May 12, 2008, 08:52 PM »

Yes,its a White MK2 Magburner from '84.....or its supposed to be!
Some kid went nuts with a can, so everything needed to nitromorsed apart from the wheels-these were scrubbed by hand...........

The frame is fairly tatty,but i'm workinh on it!

Shorty50y

macky · « **Reply #27 on:** May 12, 2008, 09:27 PM »

I'm finally able to get on photobucket......

here's the stem on the bike, the D20 cranks, the twin bolt seat clamp... no longer have the pedals...

I'll be able to put pics of everything on here tomorrow!!!

macky · « **Reply #28 on:** May 23, 2008, 01:26 AM »

Apologies for taking the p1ss on getting back to you...

here's all the stuff i have......

The Haro cranks, haro chainring & B.B./ black, need a respray & are pretty heavy like...
so i've also put on there, the chrome D20 cranks with B.B. , i thought i had all the Tektro brakes from my Haro but all i
had was the one caliper (black), the others are Ad 990, hombre & a Mil hombre... im told you can still buy the same
Tektro brakes though!! The thread on the Tech 77 levers are slightly stripped, not all the way... also, 2 pair of used Snafu Hex pegs... an ACS 16T freewheel there for some reason?? and the stem & double bolt seat clamp there tooo!!!

So, have a look, see if there's anything you want and, i dont know, make us an offer??

ohh, also i have a pair of wheels there too which were on the Haro i had... they wasnt the original wheels to that
bike, i think they came off a GT, nothing special i dont think?? and some Black KHE lamello tyres too!!

there's the wheels behind the frame........ $:-\$

shorty50y · « **Reply #29 on:** May 23, 2008, 07:11 AM »

Just a quick reply to say thanks for the pics-I'll have a good look later-but I'm gonna be away for a couple of days(prob in the rain!)
I would imagine the postage is gonna be a lot on the cranks,cos they weigh a ton!
However,just looking over it,it will prob be the Haro crank set,tec levers and the tektro brake(as much of it thats there!),and
prob the seat clamp!I'll double check over the cranks I have later and give you a shout!

Thanks for the pics Dave;I didnt think you were taking the p!ss;please dont take offence!!!!!!
Wouldnt want to fall out with anyone!
Cheers,shorty50y
Chris

macky · « **Reply #30 on:** May 26, 2008, 02:53 AM »

another one on ebay..........

http://cgi.ebay.co.uk/Haro-Stunt-Bike_W0QQitemZ230254125756QQihZ013QQcategoryZ33503QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

spesh · « **Reply #31 on:** May 26, 2008, 11:26 AM »

im after a haro double bolt seat clamp too
cheers spesh

josh_spratty · « **Reply #32 on:** June 04, 2008, 04:26 PM »

yes definetly is a mirra 540

macky · « **Reply #33 on:** June 05, 2008, 02:27 AM »

And another...............

http://cgi.ebay.co.uk/Haro-BMX-Dave-Mirra-Signature-Series-Black-20-frame_W0QQitemZ170225259113QQihZ007QQcategoryZ33503QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

shorty50y · « **Reply #34 on:** June 13, 2008, 07:10 AM »

Bit of an update on this....
Who loves nitromors?
Not this bike!

It looked like a metallic hammerite type of paint before gettimg the grey coat underneath

Now primered-needs a sand down and then back to grey for this one!

Let me know what you think so far-(should i ask?!)
Be fair-this new school stuff is deffo new to me!

shorty50y · « **Reply #35 on:** June 18, 2008, 05:27 PM »

Davemc....
you have pm
Cheers,shorty

macky · « **Reply #36 on:** June 18, 2008, 06:15 PM »

Looking good dude!!

oberonspacefruit · « **Reply #37 on:** June 18, 2008, 06:31 PM »

nice cacti.

shorty50y · « **Reply #38 on:** June 18, 2008, 07:51 PM »

Quote from: oberonspacefruit on June 18, 2008, 06:31 PM

nice cacti.

HEY!

Dont dis me cacti man!

The bike by all means ,but not the cacti!

shorty50y

shorty50y · « **Reply #39 on:** July 27, 2008, 07:36 PM »

Thanks to all for the advice,and at long last,its done!
Cheers to Brianp for the decals and saddle(i know,i didnt use it!having it repaired!)
Cheers to Davemc for the cranks,chainwheel and brake-it sprayed up ok,didnt it?
The original idea was to paint it in grey-as it was-but i wanted something a bit brighter,and a colour i hadnt already got,SO.................

The paint is Ford Electric Orange(or St220 colour!),sprayed with aerosol-2 coats of primer,sanded,2 coats orange,sanded,2 more orange then 2 coats of lacquer!
Wheels are new-Alex Y22 48 hole rims,tyres by Wilkos!
Chain from Asda
New gyro
Brake lever from stuff in the shed!

Enjoy!

sonic-1 · « **Reply #40 on:** July 27, 2008, 10:12 PM »

looks very nice !!!! drop the stem a little would look even better

macky · « **Reply #41 on:** July 28, 2008, 04:02 AM »

WoW!! You've done an Excellent job!!!

the cranks look brand new!!!

the whole bike looks brand new!!

Great job done!!

Dhillon · « **Reply #42 on:** July 28, 2008, 08:17 AM »

That's a lovely lookin bike!!

Propbably didn't look as good as this when it left the factory!!

Liking the colour mate!!

TwoBobRob · « **Reply #43 on:** July 28, 2008, 10:08 AM »

Are those forks bent backwards?

JT71 · « **Reply #44 on:** July 28, 2008, 10:32 AM »

Quote from: TwoBobRob on July 28, 2008, 10:08 AM

Are those forks bent backwards?

I was wondering that myself...couldn't figure if they are or if it's an optical illusion.

certainly don't look like a straight line forks to stem.

but other than that, and that the stem needs dropping down, it looks superb. good work.

generallee · « **Reply #45 on:** July 28, 2008, 04:52 PM »

Well done - another bike brought back to life!
One thing I dont understand though...
Mirra frames were all 1.1/8" for aheadsets and threadless forks... with a clamp on stem
How come there is a shafted quill stem in there? Is it a 1" frame? or a 1.1/8" quill stem? Or 1" forks in a 1.1/8" frame?

?

macky · « **Reply #46 on:** July 28, 2008, 05:01 PM »

Ohh yeahhh!!!

The actually are 1. 1/8 aheadsets....

are they threaded forks you've put on it??

shorty50y · « **Reply #47 on:** July 29, 2008, 07:19 AM »

Yeah,I think the forks are bent slightly-but this is how i picked it up!
The forks are indeed threaded,with a quill,but again,its how it came to me!(bearing in mind,it spent some of its time in a river.....!)
I havent any other forks to put on-I thought it may have been changed at one point,cos there is no way of mounting a front brake other than a caliper type!
TBH,its not that important-its more of a learning curve-I hadnt sprayed stuff before this bike!(Argos cycles in Bristol did my last resto paint job!)
So,I'll ride it slow(age...........its a curse!)And all seems well-no wobbles or niggles with it?Frame is 1.1/8th,hollow stem,but stem doesnt fit my burner-which is 1 ".....go figure!
Just glad the colour came out right!
Cheers for the comments guys!appreciated!